The Strength of Fly Ash-Bottom Ash (FA-BA) Mixtures as Backfill Material in Ground Improvement Works

2013 ◽  
Vol 465-466 ◽  
pp. 937-943
Author(s):  
Abd Rahim bin Hj. Awang ◽  
Wan Hilmi bin Wan Mansor ◽  
Ahmad Yusri Bin Mohamad
Keyword(s):  
Shear Strength ◽  
Fly Ash ◽  
Specific Gravity ◽  
Ground Improvement ◽  
Bottom Ash ◽  
Friction Angle ◽  
Soil Improvement ◽  
Geotechnical Properties ◽  
Raw Material ◽  
Fa Composition

In Malaysia, coal has been used as a raw material to generate electricity since 1988. In the past, most of the wastage of coal burning especially the bottom ash was not managed properly as it was dumped in the waste pond and accumulated drastically. This research has been conducted to explore the physical characteristic and geotechnical properties of fly ash-bottom ash (FA-BA) mixtures that consist of 30% FA, 50% FA, 70% FA and 90% FA by weight. The physical characteristics, that include the specific gravity, particle size distribution and compaction, were tested for each mixture without any curing. However, the geotechnical properties of the mixtures that include the permeability and shear strength had been studied at various curing periods (0, 14 and 28 days) to review the effect of time on the geotechnical properties of the mixtures. The results show that mixtures with higher FA composition have lower value of specific gravity, well-graded, and need less moisture to be compacted efficiently compared to those mixtures with lower FA composition. The results also show that mixtures with higher FA composition have less drainage characteristics but can be improved by prolonging the curing period. The maximum shear strength was obtained at mixture with 50%FA and the value increased with curing periods. The friction angle obtained ranged from 270to 370. It is also found that the mixtures with lower FA composition are more compressible compared to the mixtures with higher FA composition. The results obtained could be used by others to determine the suitability of different FA-BA mixtures for various usage in Geotechnical Engineering work such as for soil improvement work in weak soils or as backfill materials in embankment construction.

scholarly journals Industrial Wastes in Soil Improvement

2011 ◽  
Vol 2011 ◽  
pp. 1-5 ◽  
Author(s):  
G. V. Rama Subbarao ◽  
D. Siddartha ◽  
T. Muralikrishna ◽  
K. S. Sailaja ◽  
T. Sowmya
Keyword(s):  
Fly Ash ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Cost Effective ◽  
Dry Weight ◽  
Soil Improvement ◽  
Geotechnical Properties ◽  
Point Of View ◽  
Industrial Wastes ◽  
Engineering Structures

Soil existing at a particular site may not be appropriate for construction of engineering structures. The present study made an attempt to enhance the geotechnical properties of a soil replaced with industrial wastes having pozzolanic value like rice husk ash (RHA) and fly ash (FA). Soil is replaced with RHA in 2%, 4%, and 6% to dry weight of soil. It is observed that soil replaced with 4% RHA is the optimum for the soil used in this study from geotechnical point of view. To know the influence of fly ash, soil is further replaced with 4% FA along with 4% RHA. It is found that results of soil replacement by both RHA and FA proved to be soil modification and not the improvement. Hence, a cost-effective accelerator like lime is used for further replacing the above soil-4%, RHA-4% FA mix. The optimum lime content is found to be 4%.

Investigation to some Preliminary Geotechnical Properties of Soft Clay Stabilized by Fly Ash Based Geopolymers

2020 ◽  
Vol 857 ◽  
pp. 259-265
Author(s):  
Jasim M. Abbas ◽  
Amer M Ibrahim ◽  
Abdalla M. Shihab
Keyword(s):  
Fly Ash ◽  
Specific Gravity ◽  
Soft Clay ◽  
Cost Effective ◽  
Geotechnical Properties ◽  
Experimental Program ◽  
Dry Density ◽  
Alkali Activation ◽  
Plastic Behavior ◽  
Maximum Dry Density

The civil engineering projects that includes soft clay within its activities has a serious concern of hazards, such hazards can be overcame by treating the existing soils by certain materials which are named as "stabilizers". The common materials that are highly used in this field are ordinary Portland cement, fly ash, lime and rice husk ash, etc. Each one of these stabilizers has its known shortcomings. The alkali activation of any alumina silicate source produces some kind of cost effective primary binding gel which is known as "Geopolymers". This study is devoted to investigate the role of liquid over fly ash ratio to some soil – FA based Geopolymers geotechnical properties. Such ratio is taken as 2.71, 3.167, 3.8 and 4.75 respectively within the experimental program and the investigated geotechnical properties are the specific gravity, liquid and plastic limit, compaction characteristics and California bearing ratio. The tests results showed that the maximum dry density decreased about 42 % at 2.71 liq/FA whereas this the specific gravity decreased 27 % at the same this ratio. In addition, the 3.8 and 4.75 of such limits revealed no plastic behavior due to the high presence of liquid.

scholarly journals Improving Shear Strength Parameters of Sandy Soil using Enzyme-Mediated Calcite Precipitation Technique

2018 ◽  
Vol 20 (2) ◽  
pp. 91 ◽  
Author(s):  
Heriansyah Putra ◽  
Hideaki Yasuhara ◽  
Naoki Kinoshita ◽  
Erizal . ◽  
Tri Sudibyo
Keyword(s):  
Shear Strength ◽  
Sandy Soil ◽  
Friction Angle ◽  
Soil Improvement ◽  
Soil Mass ◽  
Shear Strength Parameters ◽  
Calcite Precipitation ◽  
Strength Parameters ◽  
Direct Shear Tests ◽  
Potential Applications

Several methods have been established for their various potential applications as soil improvement technique, and recently the application of grouting technique using biological process have been proposed. This study discussed the applicability of enzyme-mediated calcite precipitation (EMCP) in improving the shear strength parameters of sandy soil.  In this study, soil specimens were prepared and treated with the grouting solutions composed of urea, calcium chloride, magnesium sulfate and enzyme of urease. Evolutions in the cohesion and internal friction angle of the improved soil were examined through the direct shear tests. The presence of the precipitated materials, comprising 4.1 percent of the soil mass of the treated sand, generated a cohesion of 53 kPa. However, contrary to the improvement of cohesion, the friction angle is relatively constant. It indicated that the application of the EMCP technique has no significant impact on the friction angle

scholarly journals Characteristics of high carbon ash as a raw material for spontaneous combustion inhibitor and its field demonstration

2020 ◽  
Author(s):  
Seok Un Park ◽  
Jae Kwan Kim ◽  
Dong Ik Shin
Keyword(s):  
Fly Ash ◽  
Power Plants ◽  
Bituminous Coal ◽  
Spontaneous Combustion ◽  
Bottom Ash ◽  
Frequency Factor ◽  
Raw Material ◽  
Unburned Carbon ◽  
Mixing Ratio ◽  
High Carbon

Abstract In this study, we examined the physical chemistry, fuel characteristics and combustion reactivity of high carbon ash as a raw material for spontaneous combustion inhibitor in order to solve the problem of spontaneous combustion which has been often occurring in coal yard of coal-fired power plants in Korea. The high carbon ash has higher activation energy and lower frequency factor than bituminous coal, so combustion began at a relatively higher temperature than bituminous coal. In case of fly ash, the heat transfer characteristics were better than those of bottom ash and pond ash, and in case of coarse particles of fly ash, they were found to be highly applicable as a raw material for spontaneous combustion inhibitor due to their relatively high unburned carbon content. As a result of manufacturing spontaneous combustion inhibitors along with asphalt and PFAD (palm fatty acid distillate), the contact angle to water was more than 90° regardless of the mixing ratio, showing hydrophobic surface characteristics, and it was found that the hardness and viscosity of spontaneous combustion inhibitors increased as the mixing ratio of high carbon ash increased. In addition, when spontaneous combustion inhibitors manufactured were applied to coal stockpiles in coal yard at coal-fired power plants, there was little change in the internal temperature of coal stockpiles and the highest value of instantaneous increasing rate per minute was found to be lowered from 1.60°C/min to 0.061°C/min, indicating that spontaneous combustion inhibitors using high carbon coal ash had a great effect of preventing spontaneous combustion.

scholarly journals Compressibility of kaolinite treated with fly ash from fluidized bed combustion

2014 ◽  
Vol 13 (2) ◽  
pp. 033-038
Author(s):  
Karolina Knapik ◽  
Joanna Bzówka ◽  
Giacomo Russo
Keyword(s):  
Fly Ash ◽  
Fluidized Bed ◽  
Ground Improvement ◽  
Soil Improvement ◽  
Fluidized Bed Combustion ◽  
Waste Products ◽  
Current State ◽  
Combustion Technology ◽  
Engineering Projects ◽  
Compressibility Characteristics

Waste products such as fly ash can be an economically advantageous alternative for lime and cement in ground improvement techniques. Current state of knowledge indicates the possibility of using this material successfully in various engineering projects. However, the chemical composition of fly ash is related to the type of coal and combustion technology used in power plant. This fact indicates need for further studies aiming determination the effect of fly ash addition on soil properties. Rate of soil improvement considered in macro level includes designation of treated soil mechanical properties, inter alia compressibility characteristics. Presented results of laboratory tests are a part of a larger experimental work aiming to determine the suitability of fly ash from fluidized bed combustion for the purpose of soil strengthen with the use of selected ground improvement.

Development of Dry Wall Panels Using Fly and Bottom Ash

2013 ◽  
Vol 831 ◽  
pp. 32-35
Author(s):  
Kyoung Woo Kim ◽  
Gab Cheol Jeong ◽  
Kwan Seop Yang
Keyword(s):  
Fly Ash ◽  
Power Plant ◽  
Specific Gravity ◽  
Fire Resistance ◽  
Thermal Power ◽  
Bottom Ash ◽  
Sound Insulation ◽  
Mixing Ratio ◽  
High Rise ◽  
Wall Panels

Because of the high-rise of apartment houses, diversity of planar forms, and need for environmental improvement, the development of eco-friendly dry materials becomes necessary. Dry wall panels should be easy enough to use that they can be installed and dismantled, and have fundamental performance items for dry wall (sound insulation, fire resistance, strength, specific gravity etc.). In this study, we intend to develop dry wall panels using eco-friendly and recyclable byproducts of a thermal power plant such as fly ash and bottom ash. With the performance items and level set to develop dry wall, we developed dry wall panels by adjusting mixing ratio.

scholarly journals Improvement of the Salinized Soil Properties of Fly Ash by Freeze-Thaw Cycles: An Impact Test Study

2021 ◽  
Vol 13 (5) ◽  
pp. 2908
Author(s):  
Zhuo Cheng ◽  
Gaohang Cui ◽  
Zheng Yang ◽  
Haohang Gang ◽  
Zening Gao ◽  
...  
Keyword(s):  
Shear Strength ◽  
Fly Ash ◽  
Internal Friction ◽  
Unconfined Compressive Strength ◽  
Saline Soil ◽  
Friction Angle ◽  
Ash Content ◽  
Internal Friction Angle ◽  
Freeze Thaw ◽  
Salinized Soil

To explore the mechanism of the microstructural change in salinized soil under freeze-thaw cycles and the strength characteristics of subgrade salinized soil improved by fly ash, an unconfined compressive test, a triaxial shear test, and a scanning electron microscopy test were carried out using salinized soil samples with different fly ash contents along the Suihua to Daqing expressway in China. The results showed that after several freeze-thaw cycles, the unconfined compressive strength, triaxial shear strength, cohesion, and internal friction angle of saline soil showed a decreasing trend. With an increase in the fly ash content, the internal friction angle, cohesion, unconfined compressive strength, and shear strength of the improved saline soil first increased and then decreased. When the fly ash content was 15%, the mechanical indexes, such as cohesion and the internal friction angle, reached the maximum value. Microscopic test results showed that the freeze-thaw cycle will lead to an increase in the proportion of pores and cracks, an increase in the average pore size, and a loosening of the soil structure. The addition of fly ash can fill the soil pores, improve the microstructure of the soil, increase the cohesive force of the soil particles, and improve the overall strength of the soil. Fly ash (15%) can be added to subgrade soil in the process of subgrade construction in the Suihua-Daqing expressway area to improve the shear strength and the resistance to freezing and thawing cycles. These research results are conducive to promoting the comprehensive utilization of fly ash, improving the utilization rate of resources, and promoting sustainable development, thus providing a reference for the design and construction of saline soil roadbed engineering in seasonal frozen areas and the development and construction of saline land belts in seasonal and winter areas.

Fly Ash-Based Geopolymer: Green Material in Carbon-Constrained Society

2021 ◽  
Vol 321 ◽  
pp. 65-71
Author(s):  
Hoc Thang Nguyen ◽  
Phong Thanh Dang
Keyword(s):  
Fly Ash ◽  
Power Plants ◽  
Thermal Power ◽  
Bottom Ash ◽  
Coal Ash ◽  
Raw Material ◽  
Engineering Properties ◽  
Gravimetric Analysis ◽  
Green Materials ◽  
Alumino Silicate

Climate change is recognized as a global problem and even the industrial and construction sectors are trying to reduce the green-house gas emissions, especially on CO2 emissions. In Vietnam, the coal-fired thermal power plants are discharging millions of tons of CO2 and coal ash annually. This coal ash is comprised of about 80% of fly ash and the rest is bottom ash. This study would like to introduce one of the potential solutions in a carbon-constrained society that would not only manage the fly ash but also utilized this as raw material for green materials through geopolymerization. The geopolymer-based material has lower energy consumption, minimal CO2 emissions and lower production cost as it valorizes industrial waste. The fly ash containing high alumino-silicate resources from a coal-fired power plant in Vietnam was mixed with sodium silicate and sodium hydroxide solutions to obtain the geopolymeric pastes. The pastes were molded in 10x10x20cm molds and then cured at room temperature for 28 days. The 28-day geopolymer specimens were carried out to test for engineering properties such as compressive strength (MPa), volumetric weight (kg/m3), and water absorption (kg/m3). The microstructure analysis was also conducted for this eco-friendly materials using X ray diffraction (XRD), and Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscope (SEM), Differential Thermal Analysis - Thermal Gravimetric Analysis (DTA-TGA).

scholarly journals Study on Mechanical and Ecological Properties of Fly Ash Substrate for Ecological Slope Protection

2019 ◽  
Vol 2019 ◽  
pp. 1-11
Author(s):  
Juan Wan ◽  
Jun Zhu ◽  
Henglin Xiao ◽  
Qiang Ma
Keyword(s):  
Shear Strength ◽  
Fly Ash ◽  
Moisture Content ◽  
Friction Angle ◽  
Ash Content ◽  
Class V ◽  
Ecological Requirements ◽  
Msw Incineration ◽  
Standard Limit ◽  
Root Content

In order to realize the resource utilization of fly ash, a kind of ecological slope protection substrate was prepared by mixing fly ash produced by MSW incineration into slope protection soil. Through the direct shear test and a leaching experiment on ion pollutants, the influence that shear strength of the substrate changed with root content, ash content, and moisture content and the ecological effects of leach liquor were investigated. The results showed the following: (1) When the optimum moisture content is about 24.9%, the shear strength of the substrate is the maximum. (2) Fly ash can improve the shear strength of the soil, which can reach 1.67 times as much as that of plain soil, and the optimum content of fly ash is 5%–6.7%. (3) The root system can increase the cohesion and internal friction angle of the substrate soil but mainly increases the cohesion of the substrate soil. (4) Plants grow taller in ash-mixed soil than in plain soil. (5) When the fly ash content is 20%, the ion concentrations of Cl, Cu, and Zn are the highest: 220.7, 0.153, and 1.526 mg/L, respectively. All of them are lower than the standard limit of class V water and gradually decrease with time. Therefore, the leaching liquid will not cause environmental pollution and meet the ecological requirements.

Sign in / Sign up

Export Citation Format

Share Document