The Research of High Speed Machining Technology for Sub-Regional Complex Surfaces Based on Feature

2011 ◽  
Vol 58-60 ◽  
pp. 48-53 ◽  
Author(s):  
Chun Jiang Zhou ◽  
Hong Chun Chen
Keyword(s):  
Cutting Force ◽  
High Speed ◽  
Complex Surface ◽  
Surface Shape ◽  
Normal Vector ◽  
Force Model ◽  
High Speed Machining ◽  
Oblique Angle ◽  
Tool Axis ◽  
Regional Process

The high speed machining technology of complex surface has been a focus of the study. Based on the analysis of cutting force model for ball-end cutters and cutting force tests of 3-axis machining, the paper brings forward the reasonable oblique angle of tool axis for complex surface with different curvature. According to the different feature of surface shape, the surface is classified in terms of oblique angle formed by tool axis and normal vector of surface. Meanwhile, the processing methods are proposed to adapt to classification of surface. Adopting 3+2 axis method in 5 axis machine to processing complex surface with different features by sub-regional process will effectively improve the surface quality and extend tool life. The paper finally put forward the high speed supplementary processing technology to process the boundary and transition area of surface.

Cutting Force and Tool Deflection Predictions for High Speed Machining of Hard to Cut Material

2010 ◽  
Vol 154-155 ◽  
pp. 1157-1164 ◽  
Author(s):  
Jinn Jong Sheu ◽  
Dong Mei Xu ◽  
Chin Wei Liu
Keyword(s):  
Cutting Force ◽  
Cutting Forces ◽  
High Speed ◽  
Force Model ◽  
Beam Model ◽  
High Speed Machining ◽  
Tool Deflection ◽  
Machining Center ◽  
Helical Angle ◽  
Cutting Experiment

The dimension accuracy and the too life are the major issues of the machining of hard-to-cut materials. To fulfill the requirements of accuracy and tool life needs not only well planning of cutting path but also the proper cutting conditions of cutters. The vibration and deflection of cutters caused by poor selection of cutting conditions can be predicted using models of cutting force and tool deflection. In this paper, a cutting force model considering the effect of tool helical angle and a cantilever beam model of tool deflection were proposed for the high speed machining of hard-to-cut material SKD11. The shearing force, the plowing forces, and the helical angle of cutters are considered in the elemental force model. The material of workpiece, SKD11, studied in this paper is commonly used for the die and mold industries. The cutting constants of the proposed force model are determined via the cutting experiments carried out on a high speed machining center. A dynamometer and a high frequency data acquisition system were used to measure the x-, y-, and z-direction cutting forces. The obtained cutting constants were used to predict the cutting forces and compared with the results obtained from the cutting experiment of verification using cutters with different helical angles. The theoretical and the experimental cutting forces in the x-, y-, and z- direction are in good agreement using flat cutters with 30 and 45 degrees of helical angle. The dimension deviations of the cut surface in the cutting experiment case of tool deflection were measured using a touch probe and an infrared receiver installed on the machining center. The measured average dimension deviation, 0.163mm, is close to the predicted tool deflection, 0.153mm, using the proposed cantilever beam model. The comparisons of the cutting forces and the average of the cut surface dimension deviation are in good agreement and verify the proposed cutting force and the tool deflection models are feasible and useful.

Research on Multi-Axis High Speed Machining Milling Force of Aeroengine Impeller

2010 ◽  
Vol 455 ◽  
pp. 87-91
Author(s):  
Y.Y. Guo ◽  
Can Zhao ◽  
Wei Gang Du
Keyword(s):  
Cutting Force ◽  
High Speed ◽  
End Milling ◽  
Model Simulation ◽  
Differential Method ◽  
Force Model ◽  
High Speed Machining ◽  
Cutting Force Model ◽  
Ball End Milling ◽  
The Relationship

On the basis of the ball-end milling feature during high-speed machining impeller, the relationship between cutting force and chips is analyzed in this paper. The model of ball-end milling cutter cutting force is founded through differential method. And the coefficients solution of cutting force model is expounded. Besides, the coefficients solution and the cutting force model simulation are implemented by the software Matlab.

Numerical Simulation of Cutting Force in High Speed Machining of Inconel 718

2020 ◽  
Vol 856 ◽  
pp. 43-49
Author(s):  
Santosh Kumar Tamang ◽  
Nabam Teyi ◽  
Rinchin Tashi Tsumkhapa
Keyword(s):  
Cutting Force ◽  
Inconel 718 ◽  
High Speed ◽  
Experimental Results ◽  
Machining Process ◽  
Experimental Result ◽  
Work Piece ◽  
High Speed Machining ◽  
Numerical Result ◽  
3D Software

Machining is one of the major manufacturing processes that converts a raw work piece of arbitrary size into a finished product of definite shape of predetermined size by suitably controlling the relative motion between the tool and the work. Lately, machining process is shifting towards high speed machining (HSM) from conventional machining to improve and efficiently increase production, and towards dry machining from excessive coolant used wet machining to improve economy of production. And the tools used are mostly hardened alloys to facilitate HSM. The work piece materials are continually improving their properties by emergence and development of newer and high resistive super alloys (HRSA). In this paper an attempt has been made to validate an experimental result of cutting force obtained by performing HSM on an HRSA Inconel 718, by comparing it with the numerical result obtained by simulating the same setting using DEFORM 3D software. Based on the comparison it is found that the simulated results exhibit close proximity with the experimental results validating the experimental results and the effectiveness of the software.

Comparative Study on Cutting Force Simulation Using DEFORM 3D Software during High Speed Machining of Ti-6Al-4V

2020 ◽  
Vol 856 ◽  
pp. 50-56
Author(s):  
Kundan Kumar Prasad ◽  
Santosh Kumar Tamang ◽  
M. Chandrasekaran
Keyword(s):  
Finite Element ◽  
Cutting Force ◽  
High Speed ◽  
Cutting Temperature ◽  
Experimental Result ◽  
Depth Of Cut ◽  
Work Piece ◽  
High Speed Machining ◽  
3D Software ◽  
Deform 3D

The finite element-based machining simulations for evaluation/computation of different machining responses (i.e., cutting temperature, tool wear, cutting force, and power/energy consumption) are investigated by number of researchers. In this work, finite element machining simulation was performed to obtain knowledge about cutting forces during machining of hard materials. Titanium alloy (Ti-6Al-4V) has been increasingly used in aerospace and biomedical applications due to high toughness and good corrosion resistance. The high speed machining (HSM) simulation of Ti-6Al-4V work-piece using carbide tool coated with TiCN has been conducted with different combination of cutting conditions for prediction of main cutting force (Fz). The simulated result obtained from Deform 3D software is validated with experimental result and it was found that the result found in good agreement. The parametric variation shows that depth of cut and feed are influencing parameters on cutting force.

Simulation of Finite Element Analysis for Cutting Force of High-Speed Dry Gear Milling by Flying Cutter

2011 ◽  
Vol 86 ◽  
pp. 100-103
Author(s):  
Qian Guo ◽  
Chao Lin ◽  
Wei Quan
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Comparative Analysis ◽  
Cutting Force ◽  
High Speed ◽  
Cutting Parameters ◽  
Force Model ◽  
Cutting Force Model ◽  
Element Analysis ◽  
Gear Hobbing

This paper makes the emulate experimental research of cutting force in high-speed dry gear milling by flying cutter with finite element analysis method by using the established cutting force model yet, makes the comparative analysis for the result of simulation experiment and theoretical calculation, verifies the correctness of cutting force model and calculation method, makes the comparative analysis for the influencing relations and changing laws of cutting force and cutting parameters and so many factors, and reveals the cutting mechanism of high-speed dry gear milling by flying cutter initially. By the research of this paper, it provides basic theory for subsequent cutting machine technology of high-speed dry gear hobbing, and establishes the theoretical basis for the spread and exploitation of this technology.

Tool Overhang Effect on Cutting Force in High Speed Milling

2010 ◽  
Vol 34-35 ◽  
pp. 616-620 ◽  
Author(s):  
Zhen Yu Zhao ◽  
Ying Bin Du ◽  
Lei Ming Zhang ◽  
Bai Liu
Keyword(s):  
Cutting Force ◽  
High Speed ◽  
Milling Process ◽  
Processing Capacity ◽  
High Speed Machining ◽  
High Speed Milling ◽  
Rational Use ◽  
High Speed Impact ◽  
Overhang Length

Based on the amount of tool overhang under different high speed machining experiment, the overhang length on the high speed impact of cutting force in milling process is studies. On the basis, the proposed tool overhang and optimum program are proposed in high speed milling, through the rational use of tools to improve processing capacity of the tool.

scholarly journals Analysis and prediction of the impact of technological parameters on cutting force components in rough milling of AZ31 magnesium alloy

2021 ◽  
Vol 22 (1) ◽  
Author(s):  
M. Kulisz ◽  
I. Zagórski ◽  
A. Weremczuk ◽  
R. Rusinek ◽  
J. Korpysa
Keyword(s):  
Neural Networks ◽  
Magnesium Alloy ◽  
Cutting Force ◽  
High Speed ◽  
Cutting Speed ◽  
Az31 Magnesium Alloy ◽  
High Speed Machining ◽  
Stability Lobe Diagram ◽  
Machining Conditions ◽  
Stability Lobe

AbstractThis paper presents the results of experimental study of the AZ31 magnesium alloy milling process. Dry milling was carried out under high-speed machining conditions. First, a stability lobe diagram was determined using CutPro software. Next, experimental studies were carried out to verify the stability lobe diagram. The tests were carried out for different feed per tooth and cutting speed values using two types of tools. During the experimental investigations, cutting forces in three directions were recorded. The obtained time series were subjected to general analysis and analysis using composite multiscale entropy. Modelling and prediction were performed using Statistica Neural Network software, in which two types of neural networks were applied: multi-layered perceptron and radial basis function. It was observed that milling with high cutting speed values allows for component values of cutting force to be lowered as a result of the transition into the high-speed machining conditions range. In most cases, the highest values for the analysed parameters were recorded for the component Fx, whereas the lowest were recorded for Fy. Additionally, the paper shows that a prediction (with the use of artificial neural networks) of the components of cutting force can be made, both for the amplitudes of components of cutting force Famp and for root mean square Frms.

Investigation of the Impact Analysis of Microscale Thin-Walled Structures Manufactured by High-Speed Machining

2006 ◽  
Vol 326-328 ◽  
pp. 1599-1602
Author(s):  
Bo Sung Shin
Keyword(s):  
Finite Element ◽  
Cutting Force ◽  
High Speed ◽  
Impact Analysis ◽  
Thin Wall ◽  
High Speed Machining ◽  
High Speed Cutting ◽  
Thin Walled Structures ◽  
Thin Walled ◽  
The Impact

High-speed machining (HSM) is very useful method as one of the most effective manufacturing processes because it has excellent quality and dimensional accuracy for precision machining. Recently micromachining technologies of various functional materials with very thin walls are needed in the field of electronics, mobile telecommunication and semiconductors. However, HSM is not suitable for microscale thin-walled structures because of the lack of their structure stiffness to resist high-speed cutting force. A microscale thin wall machined by HSM shows the characteristics of the impact behavior because the high-speed cutting force works very shortly on the machined surface. We propose impact analysis model in order to predict the limit thickness of a very thin-wall and investigate its limit thickness of thin-wall manufactured by HSM using finite element method. Also, in order to verify the usefulness of this method, we will compare finite element analyses with experimental results and demonstrate some applications.

Finite Element Simulation and Experiment of Chip Formation during High Speed Cutting of Hardened Steel

2010 ◽  
Vol 29-32 ◽  
pp. 1838-1843 ◽  
Author(s):  
Chun Zheng Duan ◽  
Hai Yang Yu ◽  
Yu Jun Cai ◽  
Yuan Yuan Li
Keyword(s):  
Finite Element ◽  
Cutting Force ◽  
High Speed ◽  
Chip Morphology ◽  
Hardened Steel ◽  
High Speed Machining ◽  
Serrated Chip ◽  
High Speed Cutting ◽  
Element Simulation ◽  
Aisi 1045

As an advanced manufacturing technology which has been developed rapidly in recent years, high speed machining is widely applied in many industries. The chip formation during high speed machining is a complicated material deformation and removing process. In research area of high speed machining, the prediction of chip morphology is a hot and difficult topic. A finite element method based on the software ABAOUS which involves Johnson-Cook material model and fracture criterion was used to simulate the serrated chip morphology and cutting force during high speed cutting of AISI 1045 hardened steel. The serrated chip morphology and cutting force were observed and measured by high speed cutting experiment of AISI 1045 hardened steel. The effects of rake angle on cutting force, sawtooth degree and space between sawteeth were discussed. The investigation indicates that the simulation results are consistent with the experiments and this finite element simulation method presented can be used to predict the chip morphology and cutting force accurately during high speed cutting of hardened steel.

Sign in / Sign up

Export Citation Format

Share Document