Research on Stability of Overburden Structure around Longwall Mining Face in Steeply Dipping Seam Group

2015 ◽  
Vol 724 ◽  
pp. 100-110
Author(s):  
Shi Guang Ren ◽  
Yong Ping Wu ◽  
Jian Hui Yin
Keyword(s):  
Coal Seam ◽  
Longwall Mining ◽  
Coal Pillar ◽  
Beam Theory ◽  
Coal Seams ◽  
Working Face ◽  
Rock Structure ◽  
Longitudinal Bending ◽  
Mining Face ◽  
The Stability

The steeply dipping seam group is defined by the two or more coal seams ,a pitch between 35°~55°. Using masonry beam theory, longitudinal bending theory and “R-S-F” dynamics control theory built a lower area overburden structure mode. Analysed the stability of low position coal seam. The balance requirement and the strength of the structure which is affected by the caving rock and lower coal roof were given. It easily generates two lower position steps rock structure in inclination along working face. Regular breaking of the second structure is the main reason leads to the imbalance of the structure between upper coal pillar and upper coal mining face.The interaction among multiple coal seam panels and overburden structures is the main reason that causes the rock disaster, the unbalance of the lower area may lead to pushing accident, the imbalance of the upper area can generate shock pressure.

scholarly journals Surrounding Rock Movement of Steeply Dipping Coal Seam Using Backfill Mining

2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
Wenyu Lv ◽  
Kai Guo ◽  
Jianhao Yu ◽  
Xufeng Du ◽  
Kun Feng
Keyword(s):  
Numerical Simulation ◽  
Coal Seam ◽  
Surrounding Rock ◽  
Maximum Deflection ◽  
Coal Seams ◽  
Physical Similarity ◽  
Working Face ◽  
Rock Structure ◽  
Backfill Mining ◽  
The Stability

The movement of the overlying strata in steeply dipping coal seams is complex, and the deformation of roof rock beam is obvious. In general, the backfill mining method can improve the stability of the surrounding rock effectively. In this study, the 645 working face of the tested mine is used as a prototype to establish the mechanical model of the inclined roof beam using the sloping flexible shield support backfilling method in a steeply dipping coal seam, and the deflection equation is derived to obtain the roof damage structure and the maximum deflection position of the roof beam. Finally, numerical simulation and physical similarity simulation experiments are carried out to study the stability of the surrounding rock structure under backfilling mining in steeply dipping coal seams. The results show the following: (1) With the support of the gangue filling body, the inclined roof beam has smaller roof subsidence, and the maximum deflection position moves to the upper part of working face. (2) With the increase of the stope height, the stress and displacement field of the surrounding rock using the backfilling method show an asymmetrical distribution, the movement, deformation, and failure increase slowly, and the increase of the strain is relatively stable. Compared with the caving method, the range and degree of the surrounding rock disturbed by the mining stress are lower. The results of numerical simulation and physical similarity simulation experiment are generally consistent with the theoretically derived results. Overall, this study can provide theoretical basis for the safe and efficient production of steeply dipping coal seams.

scholarly journals Stability of "Support-Surrounding Rock" System for Fully Mechanized Longwall Mining in Steeply Dipping Coal Seams

2021 ◽  
Author(s):  
Luo Shenghu ◽  
tong wang ◽  
Wu Yongping ◽  
Huangfu Jingyu ◽  
Zhao Huatao
Keyword(s):  
Coal Seam ◽  
Longwall Mining ◽  
Stability Control ◽  
Surrounding Rock ◽  
Coal Seams ◽  
Physical Test ◽  
Rock System ◽  
Working Face ◽  
The Stability ◽  
Mining Height

Abstract The key to the safe and efficient longwall mining of steeply dipping seams lies in the stability control of the "support-surrounding rock" system. This paper analyzes the difficulty of controlling the stability of the support during the longwall mining process of steeply dipping coal seams in terms of the characteristics of the non-uniform filled-in gob using a combination of physical test, theoretical analysis and field measurements. Considering the floor as an elastic foundation, we built a "support-surrounding rock" mechanical model based on data obtained on "support-surrounding rock" systems in different regions and the laws of support motion under different load conditions. Our findings are summarized as follows. First, depending on the angle of the coal seam, the caving gangue will roll (slide) downward along the incline, resulting in the formation of a non-uniform filling zone in the deep gob in which the lower, middle, and upper sections are filled, half-filled, and empty, respectively. In addition, an inverted triangular hollow surface is formed on the floor of the gob in the middle and upper sections behind the support. Furthermore, as the angle of the coal seam, length of the working face, and mining height increase, the characteristics of the non-uniform filled-in gob are enhanced. Second, we found that, as a result of support by the gangue, the "support-surrounding rock" system is relatively stable in the lower part of the working face while, in the middle and upper sections of the working face, the contact method and loading characteristics of the support are more complicated, making stability control difficult. Third, the magnitude and direction of the load, action point, and mining height all affect the stability of the support to varying degrees, with the tangential load and action position of the roof load having the most significant impacts on the stability of the support. Under loading by the roof, rotation and subsidence of the support inevitably occur, with gradually increasing amplitude and effects on the inter-support and sliding forces. Finally, we found that it is advisable in the process of moving the support to adopt "sliding advance of support" measures and to apply a "down-up" removal order to ensure overall stability. These research results provide reference and guidance of significance to field practice production.

scholarly journals Study on the Fracture Law of Inclined Hard Roof and Surrounding Rock Control of Mining Roadway in Longwall Mining Face

Energies ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 5344
Author(s):  
Feng Cui ◽  
Shuai Dong ◽  
Xingping Lai ◽  
Jianqiang Chen ◽  
Chong Jia ◽  
...  
Keyword(s):  
Energy Release ◽  
Longwall Mining ◽  
Coal Pillar ◽  
High Energy ◽  
Mechanical Analysis ◽  
Engineering Practice ◽  
Analysis Model ◽  
Hard Roof ◽  
Working Face ◽  
The Stability

In the inclination direction, the fracture law of a longwall face roof is very important for roadway control. Based on the W1123 working face mining of Kuangou coal mine, the roof structure, stress and energy characteristics of W1123 were studied by using mechanical analysis, model testing and engineering practice. The results show that when the width of W1123 is less than 162 m, the roof forms a rock beam structure in the inclined direction, the floor pressure is lower, the energy and frequency of microseismic (MS) events are at a low level, and the stability of the section coal pillar is better. When the width of W1123 increases to 172 m, the roof breaks along the inclined direction, forming a double-hinged structure, the floor pressure is increased, and the frequency and energy of MS events also increases. The roof gathers elastic energy release, and combined with the MS energy release speed it can be considered that the stability of the section coal pillar is better. As the width of W1123 increases to 184 m, the roof in the inclined direction breaks again, forming a multi-hinged stress arch structure, and the floor pressure increases again. MS high-energy events occur frequently, and are not conducive to the stability of the section coal pillar. Finally, through engineering practice we verified the stability of the section coal pillar when the width of W1123 was 172 m, which provides a basis for determining the width of the working face and section coal pillar under similar conditions.

scholarly journals Stability Analysis and Derived Control Measures for Rock Surrounding a Roadway in a Lower Coal Seam under Concentrated Stress of a Coal Pillar

2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Zhuoyue Sun ◽  
Yongzheng Wu ◽  
Zhiguo Lu ◽  
Youliang Feng ◽  
Xiaowei Chu ◽  
...  
Keyword(s):  
Coal Seam ◽  
Numerical Simulations ◽  
Principal Stress ◽  
Coal Pillar ◽  
Control Measures ◽  
Stress Difference ◽  
Coal Seams ◽  
The Stability ◽  
Close Distance ◽  
Close Distance Coal Seams

Numerical simulations have often been used in close-distance coal seam studies. However, numerical simulations can contain certain subjective and objective limitations, such as high randomness and excessively simplified models. In this study, close-distance coal seams were mechanically modeled based on the half-plane theory. An analytical solution of the floor stress distribution was derived and visualized using Mathematica software. The principal stress difference was regarded as a stability criterion for the rock surrounding the roadway. Then, the evolution laws of the floor principal stress difference under different factors that influence stability were further examined. Finally, stability control measures for the rock surrounding the roadway in the lower coal seam were proposed. The results indicated the following: (1) The principal stress difference of the floor considers the centerline of the upper coal pillar as a symmetry axis and transmits radially downward. The principal stress difference in the rock surrounding the roadway gradually decreases as the distance from the upper coal pillar increases and can be ranked in the following order: left rib > roof > right rib. (2) The minimum principal stress difference zones are located at the center of the left and right “spirals,” which are obliquely below the edge of the upper coal pillar. This is an ideal position for the lower coal seam roadway. (3) The shallowness of the roadway, a small stress concentration coefficient, high level of coal cohesion, large coal internal friction angle, and appropriate lengthening of the working face of the upper coal seam are conducive to the stability of the lower coal seam roadway. (4) Through bolt (cable) support, borehole pressure relief, and pregrouting measures, the roof-to-floor and rib-to-rib convergence of the 13313 return airway is significantly reduced, and the stability of the rock surrounding the roadway is substantially improved. This research provides a theoretical basis and field experience for stabilizing the lower coal seam roadways in close-distance coal seams.

scholarly journals Stability Analysis of Roadway Groups under Multi-Mining Disturbances

2021 ◽  
Vol 11 (17) ◽  
pp. 7953
Author(s):  
Yuantian Sun ◽  
Ruiyang Bi ◽  
Qingliang Chang ◽  
Reza Taherdangkoo ◽  
Junfei Zhang ◽  
...  
Keyword(s):  
Coal Mining ◽  
Coal Pillar ◽  
Stability Control ◽  
Surrounding Rock ◽  
Key Strata ◽  
Working Face ◽  
Roadway Stability ◽  
Mining Disturbance ◽  
Mining Face ◽  
The Stability

The roadway stability has been regarded as the main challenging issue for safety and productivity of deep underground coal mines, particularly where roadways are affected by coal mining activities. This study investigates the −740 m main roadway in the Jining No. 2 Coal Mine to provide a theoretical basis for the stability control of the main deep roadway affected by disturbances of adjacent working activities. Field surveys, theoretical analyses, and numerical simulations are used to reveal mechanisms of the coal mining disturbance. The field survey shows that the deformation of roadway increases when the work face advances near the roadway group. Long working face mining causes the key strata to collapse based on the key strata theory and then disturbs the adjacent roadway group. When the working face is 100 m away from the stop-mining line, the roadway group is affected by the mining face, and the width roadway protection coal pillar is determined to be about 100 m. Flac3D simulations prove the accuracy of the theoretical result. Through reinforcement and support measures for the main roadway, the overall strength of the surrounding rock is enhanced, the stability of the surrounding rock of the roadway is guaranteed, and the safe production of the mine is maintained.

scholarly journals Research on Characteristic Recognition and Dangerous Prevention While Mining through Collapse Column of Pansan Minefield,China

2021 ◽  
Author(s):  
Haitao Xu ◽  
hui yang ◽  
Wenbin Sun ◽  
Lingjun Kong ◽  
Peng Zhang
Keyword(s):  
Coal Seam ◽  
Water Inrush ◽  
Coal Pillar ◽  
Simulation Software ◽  
Coal Seams ◽  
Transient Electromagnetic ◽  
Working Face ◽  
Electromagnetic Detection ◽  
Floor Failure ◽  
Collapse Column

Abstract In order to find out the characteristics of geological isomer exposed in the mining process of 12318 working face in Pansan Mine and grasp its influence law on subsequent coal seams mining, the isomer was firstly determined as the collapse column by means of 3D seismic, transient electromagnetic detection, SYT detection and other methods, and its development characteristics, conductivity and water enrichment were identified.Then FLAC3D numerical simulation software was used to analyze the characteristics of vertical stress and plastic failure zone in different coal seams during mining.Finally, by comparing the ultimate failure depth of floor and the thickness of waterproof layer in the process of each coal seam directly pushing through the collapse column, the risk of water inrush and the prevention are analyzed.The results show that the exposed geological isomer is characterized by weak water-rich collapse column.Under the influence of the mining of the previous coal seam and the activation of the collapse column, the subsequent coal seam is in the low stress area before mining, which increases the floor failure and causes the activation of the collapse column more easily during mining.Coal 5# and 4# can be directly pushed through the collapse column, and coal pillar of sufficient width should be left for coal 1# to prevent the collapse column from activating water inrush.

Similarity simulation study on displacement and stress changes response to coal mining in Longdong coal mine, China

2020 ◽  
pp. qjegh2020-111
Author(s):  
Kai Huang ◽  
Long Xu ◽  
Fusheng Zha ◽  
Zhitang Lu ◽  
Jiwen Wu ◽  
...  
Keyword(s):  
Coal Seam ◽  
Coal Mine ◽  
Water Inrush ◽  
Coal Pillar ◽  
Working Face ◽  
Field Investigations ◽  
Geological Conditions ◽  
Stress Changes ◽  
Continuous Mining ◽  
The Stability

The complicated geological conditions, including the Fault Sun, in East No. 2 mining sub-area of the Longdong coal mine will influence the stability of strata during mining, leading to serious geological hazards. To circumvent this issue, a similarity simulation experiment was designed and performed in this study, in which the failure characteristics and evolution of displacement and stress within the strata were investigated, and the optimum width of a waterproof coal pillar was determined. The results showed that, as the working face progressed, the coal seam roof gradually deformed, from initial caving of the immediate roof to complete movement and curved subsidence of the entire roof. Significant changes in displacement and stress within the coal seam roof were recorded, and these increased during continuous mining activity. Displacement and stress difference on either side of the fault gradually increased and reached remarkable values with increase in mining distance. On the basis of the experiment results, water inrush is believed to be caused by the interaction between mining and the fault, and, as calculated from parameters collected in field investigations, a waterproof coal pillar of 50 m width should be established to prevent Fault Sun activation, thereby reducing the risk of water inrush from neighbouring aquifers.

scholarly journals Study on Law of Overlying Strata Breakage and Migration in Downward Mining of Extremely Close Coal Seams by Physical Similarity Simulation

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Xiaobin Li ◽  
Wenrui He ◽  
Zhuhe Xu
Keyword(s):  
Coal Seam ◽  
Coal Pillar ◽  
Coal Seams ◽  
Monitoring Point ◽  
Rock Stratum ◽  
Working Face ◽  
Roof Fall ◽  
And Migration ◽  
Close Coal Seams ◽  
Overlying Strata

Extremely close coal seam groups are widely distributed in China, and the main mining method is downward mining. In the downward mining process of extremely close coal seam groups, the violent movement of overlying strata will cause the redistribution of surrounding rock stress. It not only produces stress concentration on the pillar but also causes the roof of the lower coal seam to be broken and difficulty in maintaining the mining roadway. In this study, the physical similitude modeling method and field observations were used to study the breakage and migration law of overlying strata in the downward mining of extremely close coal seams. Results show that in the process of mining upper coal seam, the first weighting step of the main roof is 37.5 m and the periodic weighting step is 12.5 m. The occurrence of strata separation is beneficial to the prediction of roof weighting. When the working face advances to 25 m, the rock stratum approximating a parallelogram of height 5 m does not collapse, and the working face is relatively dangerous. When mining the lower coal seam, the overall pressure of the working face is large, but the periodic weighting of the working face is not obvious. The first collapse step of the immediate roof is 15 m. When mining the upper and lower coal seams, the subsidence of the monitoring point increases significantly at 17.5 and 15 m, respectively. The roof collapse of the lower coal seam occurs 2.5 m ahead of that of the upper coal seam. The hydraulic value of the support, roof fall height, and sloughing depth in the entire working face reach the maximum at the coal pillar, and the extreme points at the coal pillar are relatively concentrated. This research provides some guidance for the safe and efficient mining of extremely close coal seams in the future.

scholarly journals Recovery Technology of Bottom Coal in the Gob-Side Entry of Thick Coal Seam Based on Floor Heave Induced by Narrow Coal Pillar

Energies ◽  
2020 ◽  
Vol 13 (13) ◽  
pp. 3368 ◽  
Author(s):  
Kai Wang ◽  
Yanli Huang ◽  
Huadong Gao ◽  
Wen Zhai ◽  
Yongfeng Qiao ◽  
...  
Keyword(s):  
Coal Pillar ◽  
Resource Recovery ◽  
Complex Stress ◽  
Pillar Width ◽  
Coal Seams ◽  
Thick Coal Seam ◽  
Working Face ◽  
Floor Heave ◽  
Mining Face ◽  
Failure Depth

To improve the resource recovery efficiency of mining face in thick coal seams, the correlation between deformation failure of bottom coal in the gob-side entry and coal pillar width was analyzed by theoretical analysis, numerical calculation, and similar simulation experiments. The results showed that, when the coal pillar was strong, with the decrease of pillar width, the failure depth of the bottom coal in the gob-side entry and floor heave increased. The deformation failure depth of the bottom coal in the entry was inversely related to the width of the coal pillar. The bottom coal was further fractured and dispersed under the action of tension, shear, and extrusion in the process of floor heave. Based on the floor heave induced by the narrow coal pillar, a recovery technique of the bottom coal with thick coal seams in the gob-side entry was developed. The width of the narrow pillar to be reserved was obtained by theoretical calculation and revised by numerical simulation; ultimately, the reasonable width was determined. Under the complex stress of the narrow pillar, the bottom coal in the gob-side entry was fully heaved, cracked, and separated. To realize the comprehensive mechanization and resource recovery of bottom coal, a matching mining excavator loader, transfer conveyor, and retractable belt conveyor were selected to transport the crushed bottom coal in the entry. This method has been successfully applied to the return airway of working face 8407 in the No. 5 Coal Mine of Yangquan Coal Group with remarkable economic and social benefits.

scholarly journals Optimization of Barrier Pillar Design in Longwall Mining with Top Coal Caving in Spontaneous Combustion Coal Seam

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Qiang Fu ◽  
Ke Yang ◽  
Qinjie Liu ◽  
Shuai Liu ◽  
Xiang He ◽  
...  
Keyword(s):  
Theoretical Model ◽  
Coal Seam ◽  
Spontaneous Combustion ◽  
Longwall Mining ◽  
Volume Fraction ◽  
Coal Pillar ◽  
Adjacent Area ◽  
Maximum Displacement ◽  
Working Face ◽  
Barrier Pillar

Determining a reasonable barrier pillar along gob-side entry of spontaneous combustion coal seam is of great significance to the prevention of spontaneous combustion. In this paper, considering the actual situation of 4301 and 4302 working faces of II-class spontaneous combustion coal seam in Changheng Mine, the characteristics of rock mass collapse and mining-induced stress redistribution of barrier pillar and adjacent area were analyzed, the cusp catastrophe model of coal pillar instability and the theoretical model of limit width of coal pillar air leakage spontaneous combustion were established, and a measurement scheme of side abutment pressure in 4301 working face was carried out. The theoretical model of the coal pillar along the gob-side entry shows that its instability is related to density of overlying strata, physical and mechanical parameters of coal body, dip angle of coal seam and weak face, and buried depth and mining width of working face. And the coal pillar in 4302 working face will be unstable if the width a ≤ 6.8   m . Field measured data shows that 2-8 m is the stress-relaxation area of side solid coal. Then, the width of coal pillar was determined as 7 m. The maximum displacement of rib-to-rib and roof-to-floor of 4302 tailentry was 520 mm and 280 mm, respectively. The coal spontaneous combustion (CSC) observation monitoring results showed that the carbon monoxide volume fraction was in the normal range during the entire process of mining, and no other signs of gas were found. The research results can provide a reference for the barrier pillar designing in the mines under similar conditions.

Sign in / Sign up

Export Citation Format

Share Document