Turbulent Convective Heat Transfer in a Transversely Grooved Tube with Natural Convection Effect

2015 ◽  
Vol 741 ◽  
pp. 458-461
Author(s):  
Xiang Yang Shen ◽  
Jing Ding ◽  
Jian Feng Lu
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Natural Convection ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Average Nusselt Number ◽  
Inlet Temperature ◽  
Lower Reynolds Number ◽  
Grooved Tube ◽  
The Heat Transfer Coefficient

The turbulent convective heat transfer in a transversely grooved tube of molten salt with natural convection effect has been numerically investigated. In general, the average Nusselt number with and without considering natural convection in transversely grooved tube was almost equal. According to the simulated results, the heat transfer coefficient of transversely grooved tube in upside region was lower than that of downside region. The effect of natural convection on unilateral heat transfer in transversely grooved tube was more obvious with lower Reynolds number and higher inlet temperature, and the effect of natural convection on unilateral heat transfer was lower with bigger groove deep.

scholarly journals Intensified Thermal Conductivity and Convective Heat Transfer of Ultrasonically Prepared CuO–Polyaniline Nanocomposite Based Nanofluids in Helical Coil Heat Exchanger

2019 ◽  
Vol 64 (2) ◽  
pp. 271-282 ◽  
Author(s):  
Abhishek Lanjewar ◽  
Bharat Bhanvase ◽  
Divya Barai ◽  
Shivani Chawhan ◽  
Shirish Sonawane
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Heat Transfer Coefficient ◽  
Heat Exchanger ◽  
Transfer Coefficient ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Base Fluid ◽  
Cuo Nanoparticles ◽  
The Heat Transfer Coefficient

In this study, investigation of convective heat transfer enhancement with the use of CuO–Polyaniline (CuO–PANI) nanocomposite basednanofluid inside vertical helically coiled tube heat exchanger was carried out experimentally. In these experiments, the effects of different parameters such as Reynolds number and volume % of CuO–PANI nanocomposite in nanofluid on the heat transfer coefficient of base fluid have been studied. In order to study the effect of CuO–PANI nanocomposite based nanofluid on heat transfer, CuO nanoparticles loaded in PANI were synthesized in the presence of ultrasound assisted environment at different loading concentration of CuO nanoparticles (1, 3 and 5 wt.%). Then the nanofluids were prepared at different concentrations of CuO–PANI nanocomposite using water as a base fluid. The 1 wt.% CuO–PANI nanocomposite was selected for the heat transfer study for nanofluid concentration in the range of 0.05 to 0.3 volume % and Reynolds number range of was 1080 to 2160 (±5). Around 37 % enhancement in the heat transfer coefficient was observed for 0.2 volume % of 1 wt.% CuO–PANI nanocomposite in the base fluid. In addition, significant enhancement in the heat transfer coefficient was observed with an increase in the Reynolds number and percentage loading of CuO nanoparticle in Polyaniline (PANI).

Investigation on Heat Transfer Characteristics of Water Through Narrow Annulus

2006 ◽  
Author(s):  
Guangyao Lu ◽  
Jing Wang
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Heat Removal ◽  
Heat Transfer Characteristics ◽  
Number Range ◽  
Transfer Characteristics ◽  
Lower Reynolds Number ◽  
Axial Heat

A study is carried out to investigate the forced convective heat transfer characteristics of water through narrow annulus. For most works undertaken before were mainly concerned with the heat transfer characteristics of heat removal systems, the experiments herein are conducted to detect the heat transfer characteristics of heated fluid, as well as cooled fluid, flowing through narrow annulus. In the experiments, directions of flow include horizontal, upstream and downstream. The Reynolds number range, based on the annular hydraulic diameter, of 10 to 30,000 is covered in the experiments. During the experiments, the transitions from laminar to turbulent convective heat transfer are carefully observed. It is found that fully turbulent convective heat transfer is achieved at a lower Reynolds number in narrow annulus than that in larger tubes. When the Reynolds number is lower than 150, the heat transfer is degraded attributed to the slow flow rate and axial heat conduction. The experimental results indicate that the heat transfer characteristics of narrow annular flow are different from that of lager, more conventionally sized pipe flow. A convective heat transfer correlation is developed and the comparisons are made with the correlations of other works.

Convective Heat Transfer Coefficients in a Building-Integrated Photovoltaic/Thermal System

2011 ◽  
Vol 133 (2) ◽  
Author(s):  
Luis M. Candanedo ◽  
Andreas Athienitis ◽  
Kwang-Wook Park
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Nusselt Number ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Average Nusselt Number ◽  
Heated Surface ◽  
Reynolds Numbers ◽  
Building Integrated Photovoltaic ◽  
T System

This paper presents an experimental study for the development of convective heat transfer correlations for an open loop air-based building-integrated photovoltaic/thermal (BIPV/T) system. The BIPV/T system absorbs solar energy on the top surface, which includes the photovoltaic panels and generates electricity while also heating air drawn by a variable speed fan through a channel formed by the top roof surface with the photovoltaic modules and an insulated attic layer. The BIPV/T system channel has a length/hydraulic diameter ratio of 38, which is representative of a BIPV/T roof system for 30–45 deg tilt angles. Because of the heating asymmetry in the BIPV/T channel, two average Nusselt number correlations are reported as a function of Reynolds number: one for the top heated surface and the other for the bottom surface. For the top heated surface, the Nusselt number is in the range of 6–48 for Reynolds numbers ranging from 250 to 7500. For the bottom insulated surface, the Nusselt number is in the range of 22–68 for Reynolds numbers ranging from 800 to 7060. This paper presents correlations for the average Nusselt number as a function of Reynolds number; this correlation is considered adequate for the design of BIPV/T systems where forced convection dominates. Local Nusselt number distributions are also presented for laminar and turbulent flow conditions.

The Effect of Thermal Wall Properties on Natural Convection in Inclined Rectangular Cells

1982 ◽  
Vol 104 (1) ◽  
pp. 111-117 ◽  
Author(s):  
B. A. Meyer ◽  
J. W. Mitchell ◽  
M. M. El-Wakil
Keyword(s):  
Heat Transfer ◽  
Cell Wall ◽  
Natural Convection ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Conductive Heat ◽  
Numerical Work ◽  
Aspect Ratios ◽  
Convection Problem ◽  
Natural Convection Problem

The effects of cell wall thickness and thermal conductivity on natural convective heat transfer within inclined rectangular cells was studied. The cell walls are thin, and the hot and cold surfaces are isothermal. The two-dimensional natural convection problem was solved using finite difference techniques. The parameters studied were cell aspect ratios (A) of 0.5 and 1, Rayleigh numbers (Ra) up to 105, a Prandtl number (Pr) of 0.72 and a tilt angle (φ) of 60 deg. These parameters are of interest in solar collectors. The numerical results are substantiated by experimental results. It was found that convection coefficients for cells with adiabatic walls are substantially higher than those for cells with conducting walls. Correlations are given for estimating the convective heat transfer across the cell and the conductive heat transfer across the cell wall. These correlations are compared with available experimental and numerical work of other authors.

A computational analysis on convective heat transfer for impinging slot nanojets onto a moving hot body

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Hakan Coşanay ◽  
Hakan F. Oztop ◽  
Fatih Selimefendigil
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Unsteady Flow ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Computational Analysis ◽  
Impinging Jets ◽  
Content Type ◽  
Moving Body ◽  
Flow Effects

Purpose The purpose of this study is to perform computational analysis on the steady flow and heat transfer due to a slot nanojet impingement onto a heated moving body. The object is moving at constant speed and nanoparticle is included in the heat transfer fluid. The unsteady flow effects and interactions of multiple impinging jets are also considered. Design/methodology/approach The finite volume method was used as the solver in the numerical simulation. The movement of the hot body in the channel is also considered. Influence of various pertinent parameters such as Reynolds number, jet to target surface spacing and solid nanoparticle volume fraction on the convective heat transfer characteristics are numerically studied in the transient regime. Findings It is found that the flow field and heat transfer becomes very complicated due to the interaction of multiple impinging jets with the movement of the hot body in the channel. Higher heat transfer rates are achieved with higher values of Reynolds number while the inclusion of nanoparticles resulted in a small impact on flow friction. The middle jet was found to play an important role in the heat transfer behavior while jet and moving body temperatures become equal after t = 80. Originality/value Even though some studies exist for the application of jet impingement heat transfer for a moving plate, the configuration with a solid moving hot body on a moving belt under the impacts of unsteady flow effects and interactions of multiple impinging jets have never been considered. The results of the present study will be helpful in the design and optimization of various systems related to convective drying of products, metal processing industry, thermal management in electronic cooling and many other systems.

scholarly journals Research on convective heat transfer characteristics of Fe3O4magnetic nanofluids under vertical magnetic field

2021 ◽  
pp. 151-151
Author(s):  
Ruihao Zhang ◽  
Sixian Wang ◽  
Shan Qing ◽  
Zhumei Luo ◽  
Zhang Xiaohui
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Reynolds Number ◽  
Field Strength ◽  
Convective Heat Transfer ◽  
Magnetic Field Strength ◽  
Convective Heat ◽  
Heat Transfer Characteristics ◽  
Magnetic Nanofluids ◽  
The Magnetic Field

This paper focuses on the convective heat transfer characteristics of Fe3O4 /Water magnetic nanofluids under laminar and turbulent conditions. After verifying the accuracy of the experimental apparatus, the effects of magnetic field strength, concentration, Reynolds number and temperature on the convective heat transfer coefficient have been studied. The convective heat transfer characteristics of nanofluids under laminar and turbulent flow conditions were studied in depth, and the influence of each factor on the heat transfer coefficient was analyzed by orthogonal experimental design method. Under the laminar flow conditions, the convective heat transfer of magnetic nanofluids performed best when the Reynolds number was 2000, the magnetic field strength was 600, the temperature was 30? and the concentration was 2%. And the convective heat transfer coefficient (h) increased by 3.96% than the distilled water in the same conditions. In turbulent state, the convective heat transfer of magnetic nanofluids performed the best when the Re was 6000, the magnetic field strength was 600, the temperature was 40? and the concentration was 2%. The h increased by 11.31% than the distilled water in the same Reynolds number and the magnetic field strength conditions.

Investigations on Transient Natural Convection in Boron Nitride-Mineral Oil Nanofluid Systems

2012 ◽  
Author(s):  
Shijo Thomas ◽  
C. B. Sobhan ◽  
Jaime Taha-Tijerina ◽  
T. N. Narayanan ◽  
P. M. Ajayan
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Heat Transfer Coefficient ◽  
Natural Convection ◽  
Boron Nitride ◽  
Transfer Coefficient ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Convective Heat Transfer Coefficient ◽  
Mineral Oil

Nanofluids are suspensions or colloids produced by dispersing nanoparticles in base fluids like water, oil or organic fluids, so as to improve their thermo-physical properties. Investigations reported in recent times have shown that the addition of nanoparticles significantly influence the thermophysical properties, such as the thermal conductivity, viscosity, specific heat and density of base fluids. The convective heat transfer coefficient also has shown anomalous variations, compared to those encountered in the base fluids. By careful selection of the parameters such as the concentration and the particle size, it has been possible to produce nanofluids with various properties engineered depending on the requirement. A mineral oil–boron nitride nanofluid system, where an increased thermal conductivity and a reduced electrical conductivity has been observed, is investigated in the present work to evaluate its heat transfer performance under natural convection. The modified mineral oil is produced by chemically dispersing boron nitride nanoparticles utilizing a one step method to obtain a stable suspension. The mineral oil based nanofluid is investigated under transient free convection heat transfer, by observing the temperature-time response of a lumped parameter system. The experimental study is used to estimate the time-dependent convective heat transfer coefficient. Comparisons are made with the base fluid, so that the enhancement in the heat transfer coefficient under natural convection situation can be estimated.

Effect of nanoparticle diameter on the forced convective heat transfer of nanofluid (water + Al2O3) in the fully developed laminar region

2014 ◽  
Vol 05 (03) ◽  
pp. 1450008 ◽  
Author(s):  
Seyyed Shahabeddin Azimi ◽  
Mansour Kalbasi ◽  
Mohammad Hosain Namazi
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Quantitative Characteristic ◽  
Solid Particles ◽  
Nanoparticle Size ◽  
Forced Convective Heat Transfer ◽  
The Heat Transfer Coefficient

Nanofluid is a suspension of nanoparticles (solid particles with diameters below 100 nm) in a conventional base fluid with significantly improved heat transfer characteristics compared to the original fluid. The heat transfer coefficient is a quantitative characteristic of the convective heat transfer. The purpose of this paper is to study the effect of the nanoparticle size (diameter) on the heat transfer coefficient of forced convective heat transfer of nanofluid in the fully developed laminar region of a horizontal tube. Using thermal conductivity model which is a function of the nanoparticle size, flow of a nanofluid (water + Al 2 O 3) in a circular tube submitted to a constant wall temperature is numerically investigated with two particle sizes of 11 nm and 47 nm. The calculated results show that the nanoparticle size does not significantly affect the heat transfer coefficient, however, the heat transfer coefficient decreases as the particle size increases.

Sign in / Sign up

Export Citation Format

Share Document