scholarly journals A Review on Effect of Orientation Fabric on Mechanical Energy Absorption Natural Fibres Reinforced Composites

2015 ◽  
Vol 773-774 ◽  
pp. 134-138 ◽  
Author(s):  
S.N.A. Khalid ◽  
Al Emran Ismail ◽  
Muhd Hafeez Zainulabidin
Keyword(s):  
Energy Absorption ◽  
Natural Fiber ◽  
Mechanical Energy ◽  
Natural Fibers ◽  
Natural Fibre ◽  
Total Force ◽  
Kenaf Fiber ◽  
Combination Technique ◽  
Absorption Performance ◽  
Angle Orientation

This paper presents the combination technique in developing the woven kenaf fiber that is used as a new method to improve energy absorption performance. This method focuses on the effect energy absorption of angle orientation. Due to the low density, natural fiber such as kenaf fiber provides comparatively good mechanical properties. Thus, natural fibers have high potential for better reinforcement in light weight structures on automotive applications. Total force, total energy, and energy absorption of natural fibre reinforced composite for different type’s natural fibre and angle orientation are discussed and reviewed.

A Review: Natural Fiber as Reinforcement in Waste Paper Recycling and its Processing Methods

2013 ◽  
Vol 315 ◽  
pp. 443-447 ◽  
Author(s):  
S.K.A. Saferi ◽  
Y. Yusof
Keyword(s):  
Natural Fiber ◽  
Natural Fibers ◽  
Strength Properties ◽  
Hibiscus Cannabinus ◽  
Waste Paper ◽  
Kenaf Fiber ◽  
Healthy Environment ◽  
Wide Range ◽  
Increased Strength ◽  
The Right

As demand for clean and healthy environment, people make many alternate solutions to save the environment. To save trees and overcome landfill of waste material and waste disposal by burning activities issues (cause to losing energy and increase pollution), people nowadays take recycling as a recovery. Recycling waste paper into new product increased over the years. Shortage of wood supply required new sources of natural fiber for papermaking industry. Many researchers have studied new sources of natural fibers from non wood materials, such as oil palm residues, kenaf (Hibiscus Cannabinus), pineapple leaf, banana, and coconut fiber. Kenaf is choose as reinforcement agent for recycled waste paper to maximize the use of kenaf in industry application due its wide range of advantages where pineapple leaf are choose as reinforcement agent because abundantly of these material in Malaysia. Reinforcement of natural fiber into waste paper during recycling process expected to increased strength properties of final product. To understand the right and suitable processing method for kenaf fiber and pineapple leaf leaves previous work from other researchers are studied to investigate pulping procedure of natural fiber and its effect on mechanical strength.

scholarly journals Effect of Natural Fiber (NF) Mix on Mechanical Strength of NF Plastic Composites (NFPC)

2019 ◽  
Vol 9 (1) ◽  
pp. 5663-5667
Keyword(s):  
Mechanical Properties ◽  
Impact Strength ◽  
Natural Fiber ◽  
Fiber Type ◽  
Natural Fibers ◽  
Natural Fibre ◽  
Additional Advantage ◽  
Plastic Composites ◽  
Twin Screw ◽  
The Impact

Natural fibers from plants are gaining importance and may substitute wood in the production of wood plastic composites (WPC). To ensure continuity of fiber supply and sustainability of WPC industries, fibers of various types could be mixed together to obtain Mix WPC. However, research need to be carried out to identify the contribution of different fiber type collectively to the mechanical properties of Mix natural fiber polymer composite (NFPC). In this study, preliminary work on the use of natural fibre (NF) such as kenaf, sugar palm and pineapple leaf fibers in the preparation of Mix NFPC were carried out. Four different fiber mix samples with different fiber ratio and size were formulated using polypropylene (PP) as the polymer matrix. Montmorrilonite (MMT) filler was added at constant amount for enhancement of composite mechanical properties. Samples were mixed and prepared using a twin screw extruder and mini injection moulding resepectively. Individual fibers and NFPC prepared were characterized using thermogravimetric analyzer (TGA). Tensile, flexural and impact strength of the composites were determined. Generally, it was found that addition of fiber mix at 50% fiber loading enhance the tensile and flexural strength of the various NFPC with minimal exceptions. The impact strength of the composites were comparable to that of blank PP implying that addition of fiber gives additional advantage besides being eco-friendly. It was also found that higher kenaf loading and different size of fiber mix contribute positively to the various strengths measured. In addition to that, composition of individual fibers also contribute to the mechanical properties of the NFPCs

Fabrication and Testing of Abaca Fibre Reinforced Epoxy Composites for Automotive Applications

2013 ◽  
Vol 718-720 ◽  
pp. 63-68 ◽  
Author(s):  
Raja R. Niranjan ◽  
S. Junaid Kokan ◽  
R. Sathya Narayanan ◽  
S. Rajesh ◽  
V.M. Manickavasagam ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Natural Fiber ◽  
Fibre Composite ◽  
Fiber Composite ◽  
Salt Water ◽  
Natural Fibers ◽  
Natural Fibre ◽  
Industrial Applications ◽  
Vertical Orientation ◽  
The Matrix

The natural fibre composite materials are nowadays playing a vital role in replacing the conventional and synthetic materials for industrial applications. This paper proposes a natural fiber composite made of Abaca fibre as reinforcing agent with Epoxy resin as the matrix, manufactured using Hand Lay-up method. Glass Fiber Reinforced Plastics (woven rovings) are used to improve the surface finish and impart more strength and stiffness to natural fibers. In this work, the fibers are arranged in alternative layers of abaca in horizontal and vertical orientation. The mechanical properties of the composite are determined by testing the samples for tensile and flexural strength. It is observed that the tensile strength of the composite material is dependent on the strength of the natural fiber and also on the interfacial adhesion between the reinforcement and the matrix. The composite is developed for automobile dashboard/mudguard application. It may also be extended to biomedical, electronics and sports goods manufacturing. It can also be used in marine products due to excellent resistance of abaca to salt water damage since the tensile strength when it is wet.

Mechanical Properties of Kenaf - Unsaturated Polyester Composites: Effect of Fiber Treatment and Fiber Length

2011 ◽  
Vol 311-313 ◽  
pp. 260-271 ◽  
Author(s):  
E. Osman ◽  
A. Vakhguelt ◽  
I. Sbarski ◽  
S. Mutasher
Keyword(s):  
Modulus Of Elasticity ◽  
Natural Fiber ◽  
Unsaturated Polyester ◽  
Weight Fraction ◽  
Weight Percent ◽  
Natural Fibre ◽  
Kenaf Fiber ◽  
Regular Trend ◽  
Theoretical Predictions ◽  
Naoh Solution

Kenaf fibre is a natural fibre which is growing in popularity due environmental issues and its properties as filler. Unsaturated polyester was used in this investigation via add 1% MEKP concentration ratio as the catalyst. This matrix was combined with untreated kenaf fiber with various fiber sizes (1-6) mm and (10-30) mm, alkalized with 6% NaOH solution for treated kenaf fiber to form natural fiber for two different fiber lengths composites. Composites were prepared by adding various percentages of kenaf fiber in unsaturated polyester resin. A general trend was observed whereby alkalized fiber composites possessed superior flexural strength and modulus and the maximum strength and modulus was at the 20wt% weight fraction. The length of (10-30) mm gave higher tensile and flexural properties compared to (1-6) mm. The modulus of elasticity showed a regular trend of an increase with fiber weight percent until 30% for both fiber lengths and afterwards a decrease in modulus of elasticity for composites with greater fiber weight fraction. The experimental modulus of elasticity was compared with the theoretical predictions and was found to be in good agreement with Hirsch’s model while the results obtained from Cox – Krenchel underestimating the experimental data.

scholarly journals Investigation of specific energy absorption of natural fiber honeycomb sandwich structure composite as building construction material application

2022 ◽  
Vol 1217 (1) ◽  
pp. 012012
Author(s):  
Nahiyan Al-Azad ◽  
Mohd Shah Mohd. Kamal
Keyword(s):  
Cell Wall ◽  
Energy Absorption ◽  
Specific Energy ◽  
Corn Starch ◽  
Natural Fiber ◽  
High Reliability ◽  
Construction Material ◽  
Natural Fibre ◽  
Building Construction ◽  
Specific Energy Absorption

Abstract The usage of incorporating natural fibre in composite material has seen some potential to be used as a future building construction material due to its recyclability, lightweight and high-reliability feature. However, the issue of implementing natural fibre as building construction material in composites material concerns the structural integrity of the material. As the characteristics of the natural fibre honeycomb composite have been discovered more in terms of properties which ranges from its physical and chemical structural composition to the quasi-static impact collapse of the material, the absorption energy of the material in different cell geometry is unknown. Therefore, the purpose of this study involves the testing of the natural fibre honeycomb (NFH) composite made from cement fibre (face sheet) and corn starch (core) with regards to its crushing behaviour when subjected to flatwise compression load according to ASTM D-3410 standard to analyse the performance of energy absorption of NFH composite with different thicknesses of the hexagonal core and cell wall thickness to determine the Specific Energy Absorption of the material. The result obtained shows that the increasing thicknesses of the core and cell wall improves the ability of the composite to absorb more energy and the specific energy absorption is higher when both factors are increased.

Modelling Analysis on Mechanical Damage of Kenaf Reinforced Composite Plates under Oblique Impact Loadings

2013 ◽  
Vol 465-466 ◽  
pp. 1324-1328 ◽  
Author(s):  
Mohd Nazrul Roslan ◽  
Al Emran Ismail ◽  
Mohd Yussni Hashim ◽  
Muhd Hafeez Zainulabidin ◽  
S.N.A. Khalid
Keyword(s):  
Mechanical Properties ◽  
Finite Element ◽  
Energy Absorption ◽  
Natural Fiber ◽  
Testing Machine ◽  
Composite Plates ◽  
Oblique Impact ◽  
Experimental Investigations ◽  
Total Force ◽  
Reinforced Composite

This research focuses on the study of oblique impact on kenaf reinforced composite plate. This study summarizes modeling analysis of targets subjected to certain angle of collisions which ranging from 0o-45o. Due to the low density, natural fiber such as kenaf fiber provides relatively good mechanical properties than glass fiber. Thus, natural fibers have high potential for better reinforcement in light weight structures such as aircraft, automobile. In this research, the velocity impact analysis is conducted by using the commercial finite element analysis software, ANSYS. A few finite element models of the nonwoven composite panel and a rigid impactor is developed using ANSYS software. Experimental investigations in determining mechanical properties and validating purposes are conducted in earlier study by using Universal Testing Machine and High Speed Impact Puncher. Total force, total energy, deformation, and energy absorption of kenaf reinforced composite for oblique impact are analyzed and discussed. The rise of oblique angle will increase the energy absorption of the composite.

scholarly journals Kenaf Fiber/Pet Yarn Reinforced Epoxy Hybrid Polymer Composites: Morphological, Tensile, and Flammability Properties

Polymers ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1532
Author(s):  
M. J. Suriani ◽  
Hasliana Asyikin Zainudin ◽  
R. A. Ilyas ◽  
Michal Petrů ◽  
S. M. Sapuan ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Surface Morphology ◽  
Burning Rate ◽  
Building Materials ◽  
Natural Fiber ◽  
Natural Fibers ◽  
Fire Retardant ◽  
Kenaf Fiber ◽  
Press Method ◽  
Commercial Applications

The application of natural fibers is rapidly growing in many sectors, such as construction, automobile, and furniture. Kenaf fiber (KF) is a natural fiber that is in demand owing to its eco-friendly and renewable nature. Nowadays, there are various new applications for kenaf, such as in absorbents and building materials. It also has commercial applications, such as in the automotive industry. Magnesium hydroxide (Mg(OH)2) is used as a fire retardant as it is low in cost and has good flame retardancy, while polyester yarn (PET) has high tensile strength. The aim of this study was to determine the horizontal burning rate, tensile strength, and surface morphology of kenaf fiber/PET yarn reinforced epoxy fire retardant composites. The composites were prepared by hybridized epoxy and Mg(OH)2 PET with different amounts of KF content (0%, 20%, 35%, and 50%) using the cold press method. The specimen with 35% KF (epoxy/PET/KF-35) displayed better flammability properties and had the lowest average burning rate of 14.55 mm/min, while epoxy/PET/KF-50 with 50% KF had the highest tensile strength of all the samples. This was due to fewer defects being detected on the surface morphology of epoxy/PET/KF-35 compared to the other samples, which influenced the mechanical properties of the composites.

A Review on the Mechanical and Physical Properties of Natural Fiber Composites

2012 ◽  
Vol 229-231 ◽  
pp. 276-281 ◽  
Author(s):  
M. Zaleha ◽  
M. Shahruddin ◽  
I. Maizlinda Izwana
Keyword(s):  
Composite Material ◽  
Natural Fiber ◽  
Natural Fibers ◽  
Natural Fibre ◽  
Fiber Reinforced ◽  
Fiber Reinforced Composite ◽  
Synthetic Fibers ◽  
Reinforced Composite ◽  
Mechanical And Physical Properties ◽  
Reinforced Composite Material

Research on the use of natural fibers as replacement to man-made fibre in fiber reinforced composites have received more interest and opened up further industrial possibilities. Natural fibre presents many advantages compared to synthetic fibers which make them attractive as reinforcements in composite material. They come from abundant and renewable resources, which ensures a continuous fibre supply and a significant material cost saving to the plastics, automotive and packaging industries. The paper reviews the previous and current research works published in the field of natural fiber reinforced composite material with special reference in mechanical properties of the natural fiber reinforced composite.

Information in United States Patents on works related to ‘Natural Fibers’: 2000-2018

2019 ◽  
Vol 12 (1) ◽  
pp. 4-76 ◽  
Author(s):  
Krittirash Yorseng ◽  
Mavinkere R. Sanjay ◽  
Jiratti Tengsuthiwat ◽  
Harikrishnan Pulikkalparambil ◽  
Jyotishkumar Parameswaranpillai ◽  
...  
Keyword(s):  
United States ◽  
Composite Materials ◽  
Natural Fiber ◽  
Comprehensive Evaluation ◽  
Natural Fibers ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Macro Scale ◽  
Structural Applications

Background: This era has seen outstanding achievements in materials science through the advances in natural fiber-based composites. The new environmentally friendly and sustainability concerns have imposed the chemists, biologists, researchers, engineers, and scientists to discover the engineering and structural applications of natural fiber reinforced composites. Objective: To present a comprehensive evaluation of information from 2000 to 2018 in United States patents in the field of natural fibers and their composite materials. Methods: The patent data have been taken from the external links of US patents such as IFI CLAIMS Patent Services, USPTO, USPTO Assignment, Espacenet, Global Dossier, and Discuss. Results: The present world scenario demands the usage of natural fibers from agricultural and forest byproducts as a reinforcement material for fiber reinforced composites. Natural fibers can be easily extracted from plants and animals. Recently natural fiber in nanoscale is preferred over micro and macro scale fibers due to its superior thermo-mechanical properties. However, the choice of macro, micro, and nanofibers depends on their applications. Conclusion: This document presents a comprehensive evaluation of information from 2000 to 2018 in United States patents in the field of natural fibers and their composite materials.

scholarly journals Energy absorption at lower limb joints in different foot contact strategies while descending stairs

2021 ◽  
Vol 29 ◽  
pp. 433-440
Author(s):  
Hyeong-Min Jeon ◽  
Ki-Kwang Lee ◽  
Jun-Young Lee ◽  
Ju-Hwan Shin ◽  
Gwang-Moon Eom
Keyword(s):  
Knee Joint ◽  
Potential Energy ◽  
Energy Absorption ◽  
Lower Limb ◽  
Mechanical Energy ◽  
Connective Tissues ◽  
Stair Descent ◽  
Young Subjects ◽  
Power And Energy ◽  
Joint Loads

BACKGROUND: Joint loads in different walking strategies during stair descent have been investigated in terms of the joint moment in association with the risk of osteoarthritis. However, the absorption mechanisms of the potential energy loss are not known. OBJECTIVE: This study aims to compare the mechanical energy absorptions in lower limb joints in different initial foot contact strategies. METHODS: Nineteen young subjects walked down on instrumented stairs with two different strategies, i.e., forefoot and rearfoot strike. Power and energy at lower limb joints during stance phase were compared between strategies. RESULTS: Lower limb joints absorbed 73 ± 11% of the potential energy released by descending stairs and there was no difference between strategies. Rearfoot strategy absorbed less energy than forefoot strategy at the ankle joint in the 1st phase, which was compensated mainly by more energy absorption at the knee in the 2nd phase and less energy generation at the hip joints in the 3rd phase. CONCLUSION: The results suggest that a leg absorbs most of the potential energy while descending stairs irrespective of the walking strategies and that any reduction of energy absorption at one joint is compensated by other joints. Greater energy absorption at the knee joint compared to the other joints suggests high burden of knee joint muscles and connective tissues during stair-descent, which is even more significant for the rearfoot strike strategy.

Sign in / Sign up

Export Citation Format

Share Document