Some Aspects about the Significant Parameters of the Thread Whirling Process

2016 ◽  
Vol 834 ◽  
pp. 96-101 ◽  
Author(s):  
Vasile Merticaru ◽  
Andrei Mihalache ◽  
Gheorghe Nagîţ ◽  
Oana Dodun ◽  
Laurenţiu Slătineanu
Keyword(s):  
Material Removal Rate ◽  
Material Removal ◽  
Removal Rate ◽  
High Accuracy ◽  
Machining Parameters ◽  
Geometrical Analysis ◽  
Machined Surface ◽  
Machining Errors ◽  
Surface Irregularities ◽  
Selection Of

One of the machining methods able to ensure a high material removal rate in the case of obtaining threaded surfaces is the whirling machining. In order to obtain a high accuracy of the machined surface and low values of the surface irregularities, an adequate selection of the machining parameters is necessary. A geometrical analysis of generating the surfaces in case of applying the whirl threading was developed. Geometrical and kinematical conditions were considered and software was used in order to modelling the process and to highlight the influence exerted by some process input factors on the machining errors and height of the surface irregularities.

scholarly journals Developmental and Experimental Study of Rotary Ultrasonic drilling process

2021 ◽  
Vol 9 (8) ◽  
pp. 2475-2478
Author(s):  
Arpit Srivastava
Keyword(s):  
Taguchi Method ◽  
Material Removal Rate ◽  
Material Removal ◽  
Removal Rate ◽  
Drilling Process ◽  
Machining Parameters ◽  
Ultrasonic Drilling ◽  
Machining Parameter ◽  
Rotary Ultrasonic Drilling ◽  
Selection Of

Abstract: The proper selection of machining conditions and machining parameter is an important aspect, before going to machine a brittle material by rotary ultrasonic drilling process Because these conditions will determine such important characteristics as; Material removal rate (MRR) and Surface roughness (SR). The purpose of this work is to determine the optimal values of machining parameters of rotary ultrasonic drilling process. The work has been based on the effect of three design factors: Tool feed rate, vibration frequency and grain size of abrasive particle on such characteristic like material removal rate (MRR). This work has been done by means of the technique of design of experiment (DOE), which provides us to perform the above-mentioned analysis with small number of experiments. In this work, a L9 orthogonal array is used to design the experiment. The adequate selection of machining parameters is very important in manufacturing system, because these parameters determine the surface quality and dimensional accuracy of the manufactured part. The optimal setting of the parameters are determined through experiments planned, conducted and analyzed using the Taguchi method. Keywords: RUSM, Material removal rate, Drilling, Taguchi method

scholarly journals Effect of Micro-EDM Parameters on Material Removal Rate of Nonconductive ZrO2 Ceramic

2013 ◽  
Vol 465-466 ◽  
pp. 1329-1333 ◽  
Author(s):  
Abdus Sabur ◽  
Abdul Moudood ◽  
Mohammad Yeakub Ali ◽  
Mohammad Abdul Maleque
Keyword(s):  
Material Removal Rate ◽  
Material Removal ◽  
Removal Rate ◽  
Pyrolytic Carbon ◽  
Carbon Layer ◽  
Machining Process ◽  
Machining Parameters ◽  
Micro Edm ◽  
Machined Surface ◽  
Electro Discharge Machining

Micro-electro discharge machining (micro-EDM) technique, an advanced noncontact machining process, is used for structuring of nonconductive ZrO2 ceramic. In this study copper foil as a conductive layer is adhered on the workpiece surface to initiate the sparks and kerosene is used as dielectric for creation of continuous conductive pyrolytic carbon layer on the machined surface. Voltage (V) and capacitance (C) are considered as the parameters to investigate the process capability of machining parameters in continuous micro-EDM of ZrO2. Different voltage pulses are studied to examine the causes of lower material removal rate (MRR) in micro-EDM of nonconductive ceramics. The results showed that in micro-EDM of ZrO2 MRR increases with the increase of voltage and capacitance initially, but decreases at higher values and no significant materials are removed at capacitances higher than 1nF.

A Mechanistic Approach to the Prediction of Material Removal Rates in Rotary Ultrasonic Machining

1995 ◽  
Vol 117 (2) ◽  
pp. 142-151 ◽  
Author(s):  
Z. J. Pei ◽  
D. Prabhakar ◽  
P. M. Ferreira ◽  
M. Haselkorn
Keyword(s):  
Material Removal Rate ◽  
Material Removal ◽  
Removal Rate ◽  
Diamond Particle ◽  
Machining Parameters ◽  
Ultrasonic Machining ◽  
Rotary Ultrasonic Machining ◽  
Stabilized Zirconia ◽  
Mechanistic Approach ◽  
Wide Range

An approach to modeling the material removal rate (MRR) during rotary ultrasonic machining (RUM) of ceramics is proposed and applied to predicting the MRR for the case of magnesia stabilized zirconia. The model, a first attempt at predicting the MRR in RUM, is based on the assumption that brittle fracture is the primary mechanism of material removal. To justify this assumption, a model parameter (which models the ratio of the fractured volume to the indented volume of a single diamond particle) is shown to be invariant for most machining conditions. The model is mechanistic in the sense that this parameter can be observed experimentally from a few experiments for a particular material and then used in prediction of MRR over a wide range of process parameters. This is demonstrated for magnesia stabilized zirconia, where very good predictions are obtained using an estimate of this single parameter. On the basis of this model, relations between the material removal rate and the controllable machining parameters are deduced. These relationships agree well with the trends observed by experimental observations made by other investigators.

Modeling of Material Removal Mechanism in Micro Electric Discharge Milling of Ti-6Al-4V

2014 ◽  
Vol 592-594 ◽  
pp. 516-520 ◽  
Author(s):  
Basil Kuriachen ◽  
Jose Mathew
Keyword(s):  
Material Removal Rate ◽  
Feed Rate ◽  
Material Removal ◽  
Removal Rate ◽  
Milling Process ◽  
Work Piece ◽  
Machining Parameters ◽  
Removal Mechanism ◽  
Material Removal Mechanism ◽  
Electric Discharge Milling

Micro EDM milling process is accruing a lot of importance in micro fabrication of difficult to machine materials. Any complex shape can be generated with the help of the controlled cylindrical tool in the pre determined path. Due to the complex material removal mechanism on the tool and the work piece, a detailed parametric study is required. In this study, the influence of various process parameters on material removal mechanism is investigated. Experiments were planned as per Response Surface Methodology (RSM) – Box Behnken design and performed under different cutting conditions of gap voltage, capacitance, electrode rotation speed and feed rate. Analysis of variance (ANOVA) was employed to identify the level of importance of machining parameters on the material removal rate. Maximum material removal rate was obtained at Voltage (115V), Capacitance (0.4μF), Electrode rotational Speed (1000rpm), and Feed rate (18mm/min). In addition, a mathematical model is created to predict the material removal

Grinding-aided electrochemical discharge drilling in the light of electrochemistry

2018 ◽  
Vol 233 (6) ◽  
pp. 1896-1909 ◽  
Author(s):  
VG Ladeesh ◽  
R Manu
Keyword(s):  
Material Removal Rate ◽  
Borosilicate Glass ◽  
Chemical Etching ◽  
Material Removal ◽  
Removal Rate ◽  
Machining Accuracy ◽  
Hybrid Technique ◽  
Machined Surface ◽  
Influence Of Process Parameters ◽  
Electrochemical Discharge

The electrically non-conductive materials like glass, ceramics, quartz, etc. are of great interest for many applications in modern industries. Machining them with high quality and at a faster rate is a challenging task. In this study, a novel technique called grinding aided electrochemical discharge drilling (G-ECDD) is demonstrated which uses a hollow diamond core drill as the tool for performing electrochemical discharge machining of borosilicate glass. The new hybrid technique enhances the material removal rate and machining accuracy to several folds by combining the thermal melting action of discharges and grinding action of the abrasive tool. This paper presents the experimental investigation on the material removal rate during G-ECDD of glass while using different electrolytes. An attempt has been made to explore the influence of electrolyte temperature on G-ECDD performance by maintaining the electrolyte at different temperatures. Experiments were conducted using three different electrolytes which include NaOH, KOH, and the mixture of both. The results obtained from this study revealed that an increase in temperature will favor chemical etching as well as electrochemical reaction rate. Also, it was observed that heating the electrolyte leads to an increase in the bubble density and enhances the ion mobility. This causes the formation of gas film at a faster rate and thereby improving the discharge activity. Thus, machining will be done at a faster rate. Better results are obtained while using a mixture of NaOH and KOH. From the microscopic images of the machined surface, it was observed that material removal mechanism in G-ECDD is a combination of grinding action, electrochemical discharges, and chemical etching. Response surface methodology was adopted for studying the influence of process parameters on the performance of G-ECDD. The new technique of grinding aided electrochemical discharge drilling proved its potential to machine borosilicate glass and simultaneously offers good material removal rate, repeatability, and accuracy.

scholarly journals An Experimental Study on the Precision Abrasive Machining Process of Hard and Brittle Materials with Ultraviolet-Resin Bond Diamond Abrasive Tools

Materials ◽  
2019 ◽  
Vol 12 (1) ◽  
pp. 125 ◽  
Author(s):  
Lei Guo ◽  
Xinrong Zhang ◽  
Shibin Chen ◽  
Jizhuang Hui
Keyword(s):  
Surface Roughness ◽  
Material Removal Rate ◽  
Manufacturing Process ◽  
Material Removal ◽  
Removal Rate ◽  
Machining Process ◽  
Abrasive Machining ◽  
Machining Performance ◽  
Machined Surface ◽  
Ultraviolet Curable

Ultraviolet-curable resin was introduced as a bonding agent into the fabrication process of precision abrasive machining tools in this study, aiming to deliver a rapid, flexible, economical, and environment-friendly additive manufacturing process to replace the hot press and sintering process with thermal-curable resin. A laboratory manufacturing process was established to develop an ultraviolet-curable resin bond diamond lapping plate, the machining performance of which on the ceramic workpiece was examined through a series of comparative experiments with slurry-based iron plate lapping. The machined surface roughness and weight loss of the workpieces were periodically recorded to evaluate the surface finish quality and the material removal rate. The promising results in terms of a 12% improvement in surface roughness and 25% reduction in material removal rate were obtained from the ultraviolet-curable resin plate-involved lapping process. A summarized hypothesis was drawn to describe the dynamically-balanced state of the hybrid precision abrasive machining process integrated both the two-body and three-body abrasion mode.

Sign in / Sign up

Export Citation Format

Share Document