Application Research of Orthogonal Analysis for Components Selection of Heat-Resistant Concrete

2014 ◽  
Vol 1015 ◽  
pp. 72-76
Author(s):  
Xing Wei Xu ◽  
Ji Yao
Keyword(s):  
Raw Materials ◽  
Engineering Application ◽  
Application Research ◽  
Range Analysis ◽  
Heat Resistant ◽  
Technical Requirements ◽  
Orthogonal Analysis ◽  
The Cost ◽  
A Company ◽  
Selection Of

Combined with the heat-resistant concrete needed for a company combustor, based on the availability of local raw materials, the orthogonal test was used, then by the variance analysis and range analysis, the components of the heat-resistant concrete which could meet the technical requirements of the project were selected. Engineering application results showed: the components of the concrete could meet technical indicators for the engineering application, and effectively reduced the cost of production of heat-resistant concrete.

D. Perhitungan HPP Telur Asin Dengan Pendekatan Variabel Costing Pada UD Mulya Jaya

2019 ◽  
Vol 4 (1) ◽  
pp. 30
Author(s):  
Neno Pratiwi ◽  
Andre Setiawan ◽  
Ilmi Cayono ◽  
Johan Trinanto
Keyword(s):  
Decision Making ◽  
Production Process ◽  
Raw Materials ◽  
Selling Price ◽  
Assistance Program ◽  
Total Cost ◽  
Cost Of Production ◽  
The Cost ◽  
A Company ◽  
Important Objective

ABSTRAK Pada umumnya harga pokok produksi dalam akuntansi diartikan dengan jumlah biaya dari seluruh pemakaian yang telah dilakukan selama proses produksi atau kegiatan yang mana mengubah bahan baku menjadi produk jadi (produk siap pakai/siap saji). Tujuan penting dalam tugas ini yaitu memperhitungkan harga pokok produksi dari UD Mulya Jaya dengan menggunakan pendekatan variabel costing untuk mengetahui besarnya harga pokok pada setiap produk yang diproduksi. Pentingnya penentuan harga pokok produksi dapat dilakukan sebelum para usaha menentukan harga jual. Pendampingan ini bertujuan untuk membantu mencari dan menentukan harga pokok produksi yang dapat digunakan untuk menetapkan harga jual. Pendampingan ini dilakukan untuk membantu wirausaha dalam program kerja, yaitu bimbingan akuntansi dengan fokus perhitungan harga pokok produksi. Dalam menentukan harga pokok produksi pada UD Mulya Jaya dapat menggunakan pendekatan variable costing yang biasanya metode ini digunakan untuk semacam pengambilan keputusan dalam perusahaan. Melalui program pendampingan kewirausahaan didapatkan hasil perhitungan harga pokok produksi yang menggunakan pendekatan variabel costing. Hasil tersebut dapat menjadi suatu keputusan bagi UD Mulya Jaya untuk dapat menetapkan harga pokok produksi pada setiap produk telur asin. Kata Kunci : Kewirausahaan, HPP, Harga.   ABSTRACT In general, the cost of production in accounting is defined as the total cost of all uses that have been made during the production process or activities which convert raw materials into finished products (ready-to-use / ready-to-serve products). An important objective in this task is to calculate the cost of goods manufactured from UD Mulya Jaya by using a variable costing approach to find out the cost of goods on each product produced. The importance of determining the cost of production can be done before businesses determine the selling price. This assistance aims to help find and determine the cost of production that can be used to set the selling price. This assistance is carried out to help entrepreneurs in work programs, namely accounting guidance with a focus on calculating the cost of production. In determining the cost of production at UD Mulya Jaya, it can use the variable costing approach, which is usually used for a kind of decision making in a company. Through the entrepreneurship assistance program, the results of the calculation of the cost of production are obtained using the variable costing approach. These results can be a decision for UD Mulya Jaya to be able to set the cost of production for each salted egg product. Keywords: Entrepreneurship, COGS, Price

scholarly journals Selection of Fish Raw Material Suppliers by Integrating ANP and Topsis Methods in CV. Riki Utama Mandiri

2021 ◽  
Vol 1 (2) ◽  
Author(s):  
Aula Fajar Iman Sakti ◽  
Wiwik Sulistiyowati
Keyword(s):  
Supplier Selection ◽  
Raw Materials ◽  
Rank Order ◽  
Raw Material ◽  
Network Process ◽  
The Common ◽  
Common Problems ◽  
Frozen Fish ◽  
A Company ◽  
Selection Of

CV. Riki Utama Mandiri is a company in distributing an economic fish frozen product. This company distributed any kind of retail and wholesaler, both domestic and export. They distributing many frozen fish products variant such as Patin Fillet and Shark Fin. The all raw materials of those frozen seafood was obtained by three different suppliers. The common problems found in CV. Riki Utama Mandiri mostly about raw patin fish supplier which often committed delivery delays.  The purpose of this research is to fixing the supply chain management in deciding the more accurate selections of raw materials supplier. To overcome the common problems that happen. Analytical network process (ANP) will simplify the criteria weight values and sub criteria of each supplier. Meanwhile, technique for others reference by similarity to ideal solution (TOPSIS) method is used for giving a rank order of the alternative supplier. This research is expected for being a consideration for the company in obtaining a good and more effective kind of raw supplier. We also expecting the company for tighten supplier selection more effective way so that it can fullfilled the existing standard. Also to overcome the common problems such as delivery delays, competing raw materials with uncertain quality, and difficulty in sort out the raw materials due to size issues.

scholarly journals OPTIMASI PERENCANAAN PRODUKSI DENGAN MENGGUNAKAN METODE LINEAR PROGRAMMING PADA CV. ACEH BAKERY

2018 ◽  
Vol 1 (1) ◽  
Author(s):  
Ria Asysyfa Hasmi
Keyword(s):  
Linear Programming ◽  
Raw Materials ◽  
Alternative Solution ◽  
Minimum Cover ◽  
Optimal Linear ◽  
Cost Of Production ◽  
Demand Limit ◽  
The Cost ◽  
A Company ◽  
Planning Production

One purpose is to review company get advantages The Maximum and minimum cover charge thing. Many HAL should be made for a review of A Company Posted achieve these objectives, ie only prayer is how to determine Products Should TYPE WITH generated utilizing existing resources thus able to contribute Maximum AGRO. Company Must Develop CAN BE Meticulously Term Planning Production will be produced for review optimize profits WITH take into account factors such as the production of raw materials. When Paid Products produced too big Namely State exceeds the demand limit, then HAL husband will result in inaccuracies allocate factors of production is owned, thereby increasing the cost of production includes. Here Writers Wanted Looking for an alternative solution to a review AS WITH planned increase profits Production WITH progamming optimal linear method.The findings of The TIN using software TORA BY TYPE findings For green bread, CV. Aceh Bakery Must be producing as much as 152 packs / day. For TYPE bread Skinless, CV. Aceh Bakery Must be producing as much as 149 packs / day. For TYPE crusted bread, CV. Aceh Bakery Must be producing 150 packs / day. Article Search Google so, then CV. Aceh Bakery will get a profit of Rp.1.973.100, - / day.Keyword : Roti, Optimization, Linier Proggramming, TORA.

scholarly journals ANALISIS BIAYA DIFERENSIAL DALAM PENGAMBILAN KEPUTUSAN MEMBELI ATAU MEMPRODUKSI SENDIRI DAN ANALISIS BIAYA PELUANG PADA RM. PONDOK HIJAU

2015 ◽  
Vol 4 (1) ◽  
pp. 51
Author(s):  
. Elvalina ◽  
David P.E. Saerang ◽  
Victorina Z. Tirayoh
Keyword(s):  
Opportunity Cost ◽  
Raw Materials ◽  
Quantitative Result ◽  
Opportunity Costs ◽  
Costs Analysis ◽  
Maximum Profit ◽  
Differential Costs ◽  
The Right ◽  
The Cost ◽  
A Company

Economic growth in the era of globalization requires the company to gain maximum profit. Running business requires information. A company should be able to compete with other companies. One of the decisions that must be taken in planning at every alternative is to buy or produce itself a component of raw materials. Differential costs are related to the opportunity costs, which is the differential costs incurred costs as a result of certain decisions while the opportunity costs is the cost incurred when choosing a decision. The purpose of this study to analyze the differential costs in taking the decision to buy or produce itself and to analyze the opportunity cost to decisions taken on RM. Pondok Hijau. The analytical method used is descriptive  quantitative. Result of differential costs analysis showed that the right decisions can be taken by the management company that manufactures its own because getting a higher differential gain, compared to buying from outside. And of the opportunity costs analysis produce itself rew materials are also more profitable, thus buying from outside becomes more expensive.

scholarly journals SISTEM INFORMASI AKUNTANSI PENENTUAN HARGA POKOK PRODUKSI DENGAN METODE JOB ORDER COSTING SEBAGAI PENENTU HARGA JUAL BERBASIS WEB

2020 ◽  
Vol 13 (1) ◽  
pp. 1-9
Author(s):  
Sri Wahyuning Wahyuning ◽  
Nofi Khayati
Keyword(s):  
Raw Materials ◽  
Production Costs ◽  
Selling Price ◽  
Accounting Information System ◽  
Cost Of Production ◽  
The Right ◽  
The Cost ◽  
A Company ◽  
D Model

Accounting Information System is a system that provides an information technology-based accounting process. Determination of the cost of production in a company requires the right method, because the cost of production is one of the factors that can influence the determination of the selling price. The cost of production is also used to determine the magnitude of the profits obtained by the company.Manufacturing company which is a company engaged in the process of raw materials into finished goods, requires basic materials that are used as the main ingredients in the production process.This study aims to determine how the application of the Job Order Costing method is a method of collecting production costs to determine the cost of production at the company on the basis of orders. The method used in this study uses a research and development (R&D) model, which is the method used to produce certain products, and test the effectiveness of the product. In this study using the PHP programming language and MySQL for the database

scholarly journals Pengendalain Harga Pokok Produksi Dengan Metode Full Costing Pada “Kerupuk Sari Udang Mbah Oerip-Sidoarjo”

2019 ◽  
Vol 3 (1) ◽  
pp. 40-49
Author(s):  
Darno Darno
Keyword(s):  
Production Process ◽  
Raw Materials ◽  
Production Costs ◽  
Calculation Methods ◽  
Cost Of Production ◽  
The Cost ◽  
A Company

Companies must be able to compete in terms of prices by managing the handling of raw materials, labor and overhaed factories. All three are very important because they directly affect the cost of the product (HPP). UD company Redjo Makmoer Indonesia, is a company that produces crackers. For the determination of production costs and pricing of sales, the company makes a policy on the method of calculating the cost of production. In addition to pricing, also to control the process and reduce the size of the company's production costs. Based on observations for one month the production process, the cost of production with the method of the company that has been run is Rp. 40,100.00. With the full costing method, Rp. 41,500.00. It can be concluded that the cost of production based on the two calculation methods above there are differences or differences. With the full costing method, the cost of production is higher. This shows that so far the calculations made by the company have several elements that have not been included in the calculation.

scholarly journals Product range optimization – case study

2010 ◽  
Author(s):  
Simona Barsan ◽  
Mihaela Sima
Keyword(s):  
Production Capacity ◽  
Optimal Solution ◽  
Optimization Procedure ◽  
Product Range ◽  
Market Requirements ◽  
Products Analysis ◽  
The Cost ◽  
A Company ◽  
Selection Of

The paper presents the optimizing procedure of the product range manufactured by a company which operates in the area of production and sales of the milling and bakery products. The paper authors have taken this company as an example since the products it manufactures and commercializes address to population and are required to meet both qualitative and quantitative market requirements. After a brief overview of the company, one analyses its production capacity, staff structure and distribution as well as the concern of the company for the employees’ training in its activity field, so as to fulfill all the necessary and required conditions for developing a qualitative activity. The analysis continues with: the cost of the product before optimization, software presentation and computerized optimization procedure, the selection of the products to be optimized, data collection, the optimization procedure, results obtaining and analysis, choosing the optimal solution for the analyzed products analysis and for the future competitiveness of the company.

MASTERING CHROMIUM-BASED LIGATURES IN SMELTING HEAT-RESISTANT NICKEL ALLOYS AND STEELS

2021 ◽  
pp. 13-22
Author(s):  
S.A. Krylov ◽  
◽  
E.V. Egorov ◽  
A.A. Makarov ◽  
M.A. Druzhnov ◽  
...  
Keyword(s):  
Nickel Alloy ◽  
High Frequency ◽  
Nickel Alloys ◽  
Raw Materials ◽  
Significant Rise ◽  
Rapid Rise ◽  
Charge Materials ◽  
Heat Resistant ◽  
Materials Used ◽  
The Cost

The rapid rise in prices for charge materials used for smelting heat-resistant nickel alloy and steels leads to a significant rise in the cost of the final product. In order to curb the rise in prices for semi-finished products FSUE «VIAM» together with metallurgical plants of the industry, is carrying out work on testing and introducing new types of charge materials that can replace the currently used high-frequency materials. The article discussed the materials tested instead of those currently used in the smelting of steels and alloys containing chromium, tungsten and molybdenum, produced at domestic enterprises from domestic raw materials.

scholarly journals Selection of compositions of ceramic masses based on industrial wastes using mathematical planning methods

2020 ◽  
Vol 164 ◽  
pp. 14017
Author(s):  
Khungianos Yavruyan ◽  
Evgeniy Gaishun ◽  
Vladimir Kotlyar ◽  
Irina Serebryanaya ◽  
Anastasiya Filippova ◽  
...  
Keyword(s):  
Raw Materials ◽  
Industrial Wastes ◽  
Raw Material ◽  
Mathematical Planning ◽  
High Quality ◽  
Ceramic Blocks ◽  
Planning Methods ◽  
Technogenic Raw Materials ◽  
The Cost ◽  
Selection Of

This paper reviews the issue of selecting the compositions of ceramic masses for the production of ceramic blocks made out of technogenic raw materials of a coal series using the methods of mathematical planning. The possibility of replacing classic clay raw materials with non-traditional coal technogenic raw materials (screenings of heaps), which are formed during the processing of heaps with the aim of extracting coal, is considered. The reasons for the growing interest in this technogenic raw material were the reduction of the base of high-quality clay raw materials, the large number of accumulated heaps, as well as the need to reduce the cost of production of ceramic blocks.

scholarly journals Pemilihan Supplier Sodium Hiroxide Liquid Integrasi Dengan Metode AHP – Topsis

2017 ◽  
Vol 17 (2) ◽  
pp. 62
Author(s):  
Muhamad Munir
Keyword(s):  
Sodium Hydroxide ◽  
Supplier Selection ◽  
Raw Materials ◽  
Raw Material ◽  
Topsis Method ◽  
Synthetic Resins ◽  
Major Supplier ◽  
A Company ◽  
Selection Of

PT. Eterindo Nusa Graha is a company engaged in basic chemical industry that produces synthetic resins and glycerine. One of the raw material for production of synthetic resins is DOP produced 45,000 tons/year. One adjuvant DOP is sodium hydroxide liquid. The raw material is supplied by several companies so that in choosing a major supplier to supply sodium hidroxide is important. Sodium hydroxide liquid supplied by Manunggal indah, Toya indo, and Surya Makmur. In reality the quality of raw materials are sometimes less suitable and delays in delivery have an impact on the production process. So that needs to be measured to determine the supplier's performance. Supplier selection is expected to suit the needs of PT. Eterindo Nusa Graha. This study aims to determine the criteria and sub-criteria supplier selection according to the needs of companies and provides the results of decision-making for the selection of the supplier company. The method used in this study is used AHP weighting of the criteria and sub-criteria and TOPSIS. The results of the research produced 6 criteria and 14 sub-criteria. Of AHP, the weight of the biggest criteria is Quality (0.38651) and Delivery (0.17208), while from TOPSIS method produces major supplier PT. Manunggal indah with positive ideal distance value 0.008558653 and negative ideal distance value 0.04522.

Sign in / Sign up

Export Citation Format

Share Document