Mechanism of Microwave Assisted Technique Acid Leaching Coal Gangue

2014 ◽  
Vol 1030-1032 ◽  
pp. 116-120
Author(s):  
Cheng Long Liu ◽  
Ju Pei Xia ◽  
Yu Chong Xie
Keyword(s):  
Acid Leaching ◽  
Coal Gangue ◽  
X Ray Diffraction ◽  
Reaction Conditions ◽  
Characterization Methods ◽  
X Ray ◽  
Microwave Assisted ◽  
Leaching Methods ◽  
Related Process ◽  
Scanning Electron

The coal gangue are produced in a coal mine heap of Pan xian, Gui zhou, by using microwave assisted acid leaching methods and under certain reaction conditions, the products of different stages of acid leaching were characterized through different characterization methods like X-ray diffraction, scanning electron microscope and energy dispersive spectroscopy. The related process mechanism of Microwave assisted technique acid leaching gangue was preliminarily studied by the characterization results from analyzing the products of different stages of acid leaching.

scholarly journals Development of Biodegradable Agar-Agar/Gelatin-Based Superabsorbent Hydrogel as an Efficient Moisture-Retaining Agent

Biomolecules ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 939 ◽  
Author(s):  
Jyoti Chaudhary ◽  
Sourbh Thakur ◽  
Minaxi Sharma ◽  
Vijai Kumar Gupta ◽  
Vijay Kumar Thakur
Keyword(s):  
Low Cost ◽  
X Ray Diffraction ◽  
Natural Polymers ◽  
Reaction Conditions ◽  
Superabsorbent Hydrogel ◽  
X Ray ◽  
Microwave Assisted ◽  
Water Swelling ◽  
Water Holding ◽  
Scanning Electron

Downgrading in the yield of crop is due to the inadequate availability of water. The way out for this trouble is to construct synthetic resources dependent on natural polymers with great water absorption and preservation limits. The present study investigated the design of agar-agar (Agr) and gelatin (GE) copolymerized methyl acrylate (MA) and acrylic acid (AA) hydrogel (Agr/GE-co-MA/AA) as a soil conditioner for moisture maintenance in agriculture. Agr/GE-co-MA/AA hydrogel was prepared by utilizing microwave-assisted green synthesis following the most suitable reaction conditions to obtain a remarkable water swelling percentage. The fabricated Agr/GE-co-MA/AA hydrogel was investigated through field emission scanning electron microscopy (FESEM), fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). The water holding capacity of the soil and sand was examined by mixing Agr/GE-co-MA/AA hydrogel with soil and sand. The result demonstrates that the water holding time extended from 10 to 30 days for soil and 6 to 10 days for sand by using Agr/GE-co-MA/AA hydrogel. This synthesized biodegradable, low-cost and non-toxic Agr/GE-co-MA/AA hydrogel shows novelty as soil water maintaining material for irrigation in agriculture.

Rapid Synthesis and Characterization of CuInS2 Prepared Using Microwave-Assisted Heating

2015 ◽  
Vol 775 ◽  
pp. 143-146
Author(s):  
Ming Kwen Tsai ◽  
Yueh Chien Lee ◽  
Chia Chih Huang ◽  
Sheng Yao Hu ◽  
Kwong Kau Tiong ◽  
...  
Keyword(s):  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
Rapid Synthesis ◽  
X Ray ◽  
Sem Image ◽  
Microwave Assisted ◽  
Calcination Treatment ◽  
Scanning Electron

In this work, the CuInS2 nanoparticles are successfully synthesized by microwave-assisted heating technique and further calcined at 400 °C. The morphological, structural, and optical properties of the synthesized CuInS2 nanoparticles are investigated by scanning electron microscope (SEM), X-ray diffraction (XRD), Raman scattering, and transmittance measurement, respectively. The SEM image shows the clear particle shape of the calcined CuInS2 nanoparticles. After calcination treatment, the fundamental (112) peak of the XRD spectrum and a broad Raman peak mixed with chalcopyrite and CuAu structures support the improved crystallinity of the calcined CuInS2 nanoparticles.

scholarly journals Synthesis of Brushite from Phophogypsum Industrial Waste

2021 ◽  
Vol 12 (5) ◽  
pp. 6580-6588
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Industrial Waste ◽  
Sol Gel ◽  
Dicalcium Phosphate Dihydrate ◽  
X Ray Diffraction ◽  
Characterization Methods ◽  
X Ray ◽  
Phosphate Dihydrate ◽  
Scanning Electron

Dicalcium phosphate dihydrate (DCPD) nanoparticles, also known as brushite, are considered an important bioceramic compound. In this study, brushite was prepared from Moroccan phosphogypsum (PG) using a new sol-gel method. A two-step technique undergoes the synthesis of brushite, the preparation of anhydrite from PG followed by adding phosphoric acid in the presence of sodium hydroxide. The morphology, the chemical composition, and the crystallites size were obtained using Scanning Electron Microscopy (SEM-EDAX), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR), respectively. According to the Debye-Scherrer equation, these characterization methods indicated that the synthesized brushite was highly pure according to the Ca/P ratio of 1.14 and an average crystallites size estimated at 66 nm. These results proved that the brushite was successfully synthesized from Moroccan phosphogypsum.

scholarly journals Pengaruh Suhu dan Konsentrasi terhadap Proses Pemisahan Nikel dari Logam Pengotor Menggunakan Metode Leaching

FLUIDA ◽  
2020 ◽  
Vol 13 (2) ◽  
pp. 81-92
Author(s):  
Ade Yanti Nurfaidah ◽  
Dheana Putri Lestari ◽  
Rheisya Talitha Azzahra ◽  
Dian Ratna Suminar
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Sulfuric Acid ◽  
Atmospheric Pressure ◽  
Operating Temperature ◽  
Acid Leaching ◽  
X Ray Diffraction ◽  
X Ray ◽  
Pressure Acid Leaching ◽  
Scanning Electron

Abstrak Nikel merupakan unsur logam yang penggunaannya sudah dikenal dalam industri, terutama pada pelapisan logam dan paduan. Pengolahan nikel dari bijih nikel laterit (jenis Limonit) menggunakan proses hidrometalurgi Atmospheric Pressure Acid Leaching (APAL) yang dinilai lebih ekonomis karena pemakaian energi dan biaya operasional cukup rendah. Media pelarut yang digunakan berupa larutan asam sulfat (H2SO4). Sebelum dilakukan pengolahan, karakterisasi bijih dilakukan menggunakan X-Ray Diffraction (XRD), X-Ray Flourscence (XRF), dan Scanning Electron Microscopy (SEM). Metode penelitian yang dilakukan yaitu literature review. Hasil review dari beberapa artikel jurnal menunjukkan bahwa kadar nikel yang terkandung pada suatu bijih sekitar 1,42%, 2,94 dan 0,95% serta sisanya adalah pengotor. Kondisi operasi yang tepat akan menghasilkan pemurnian nikel yang cukup tinggi. Parameter kondisi operasi yang dapat memengaruhi proses pemisahan nikel diantaranya suhu operasi yang ditunjukan dengan semakin meningkatnya % ekstraksi nikel seiring dengan kenaikan suhu. Selain suhu operasi, konsentrasi pelarut juga salah satu parameter yang mempengaruhi % ekstraksi karena semakin tinggi ion H+ akan memudahkan proses pelarutan sehingga akan mengikat Nikel Oksida yang terdapat pada bijih. Suhu paling optimal untuk menghasilkan nikel dengan kemurnian tinggi dalam operasi pelindian atmosferik adalah 90°C dan konsentrasi asam sulfat 5 M.  Kata Kunci: Nikel, pelindian, suhu, konsentrasi   Abstract  Nickel is a metal element whose use is well known in industry, especially in metal and alloy plating. The processing of nickel from laterite nickel ore (Limonite type) uses a hydrometallurgical process of Atmospheric Pressure Acid Leaching (APAL) which is considered more economical because energy consumption and operational costs are quite low. The solvent medium used is a solution of sulfuric acid (H2SO4). Prior to processing, ore characterization was carried out using X-Ray Diffraction (XRD), X-Ray Flourscence (XRF), and Scanning Electron Microscopy (SEM). The research method literature review article. The results of reviews from several journal articles show that the nickel content contained in an ore is around 1.42%, 2.94% and 0.95% and the rest is impurity. The right operating conditions will result in relatively high nickel refining. The operating condition parameters that can affect the nickel separation process include the operating temperature which is indicated by the increasing % nickel extraction along with the increase in temperature. In addition to operating temperature, solvent concentration is also one of the parameters that affects the% extraction because the higher the H+ ion will facilitate the dissolving process so that it will bind to the Nickel Oxide contained in the ore. The optimal temperature to produce high-purity nickel in atmospheric leaching operations is 90°C and a sulfuric acid concentration of 5 M. Keywords: Nickel, leaching, temperature, concentration

Morphology Control of the Nano-MnO2 by Microwave Hydrothermal Synthesis

2012 ◽  
Vol 624 ◽  
pp. 47-50
Author(s):  
Shi Lei Zhang ◽  
Ben Niu ◽  
Enlei Qi ◽  
Lei Wang ◽  
Jie Qiang Wang
Keyword(s):  
Hydrothermal Synthesis ◽  
Energy Dispersive Spectrometer ◽  
Raw Material ◽  
X Ray Diffraction ◽  
Crystal Forms ◽  
X Ray ◽  
Microwave Assisted ◽  
Structure And Morphology ◽  
Microwave Hydrothermal ◽  
Scanning Electron

In this paper, KMnO4 was used as raw material, nano-MnO2 with different morphologies such as flowers globular, hollow tubular and rodlike were obtained by the microwave assisted hydrothermal synthesis under the acidic condition. The crystal structure and morphology of the resultant MnO2 were characterized by X-ray Diffraction (XRD) and Scanning Electron Microscope (SEM), respectively. The elements and content of samples were tested by Energy Dispersive Spectrometer (EDS). The influence of reaction temperature and holding time on crystal forms and morphologies of the MnO2 was analyzed.

scholarly journals Aroylhydrazone Schiff Base Derived Cu(II) and V(V) Complexes: Efficient Catalysts towards Neat Microwave-Assisted Oxidation of Alcohols

2020 ◽  
Vol 21 (8) ◽  
pp. 2832
Author(s):  
Manas Sutradhar ◽  
Tannistha Roy Barman ◽  
Armando J. L. Pombeiro ◽  
Luísa M. D. R. S. Martins
Keyword(s):  
Schiff Base ◽  
Aliphatic Alcohol ◽  
Cinnamyl Alcohol ◽  
X Ray Diffraction ◽  
Reaction Conditions ◽  
Benzyl Alcohols ◽  
X Ray ◽  
Microwave Assisted ◽  
Tert Butyl Hydroperoxide ◽  
Oxidation Of Alcohols

A new hexa-nuclear Cu(II) complex [Cu3(μ2-1κNO2,2κNO2-L)(μ-Cl)2(Cl)(MeOH)(DMF)2]2 (1), where H4L = N′1,N′2-bis(2-hydroxybenzylidene)oxalohydrazide, was synthesized and fully characterized by IR spectroscopy, ESI-MS, elemental analysis, and single crystal X-ray diffraction. Complex 1 and the dinuclear oxidovanadium(V) one [{VO(OEt)(EtOH)}2(1κNO2,2κNO2-L)]·2H2O (2) were used as catalyst precursors for the neat oxidation of primary (cinnamyl alcohol) and secondary (1-phenyl ethanol, benzhydrol) benzyl alcohols and of the secondary aliphatic alcohol cyclohexanol, under microwave irradiation using tert-butyl hydroperoxide (TBHP) as oxidant. Oxidations proceed via radical mechanisms. The copper(II) compound 1 exhibited higher catalytic activity than the vanadium(V) complex 2 for all the tested alcohol substrates. The highest conversion was found for 1-phenylethanol, yielding 95.3% of acetophenone in the presence of 1 and in solvent and promoter-free conditions. This new Cu(II) complex was found to exhibit higher activity under milder reaction conditions than the reported aroylhydrazone Cu(II) analogues.

Fabrication of Porous YSZ from ZnO-YSZ Cermet

2007 ◽  
Vol 124-126 ◽  
pp. 235-238
Author(s):  
Moon Jin Hwang ◽  
Chong Soo Han
Keyword(s):  
Electron Microscope ◽  
Gas Permeability ◽  
Acid Leaching ◽  
Yttria Stabilized Zirconia ◽  
X Ray Diffraction ◽  
Stabilized Zirconia ◽  
Scanning Electron Microscope Image ◽  
X Ray ◽  
Electron Microscope Image ◽  
Scanning Electron

Porous YSZ(8 mol% yttria-stabilized zirconia) was prepared by an acid leaching of ZnO-YSZ composite. The ZnO-YSZ composites were obtained by two different methods, a 1450 °C sintering of the mechanical mixture of ZnO and YSZ powders or a decomposition of Zn(NO3)2 deposited on YSZ and a subsequent sintering. The XRD (X-ray diffraction) pattern of the composite indicated that it was a mixture of ZnO and YSZ even after the sintering. Sharp edge or round edge of YSZ was observed in SEM (Scanning Electron Microscope) image of the porous-YSZ from the mixture of ZnO and YSZ, or Zn(NO3)2 deposited on YSZ, respectively. The porous YSZ from the composite having ZnO component greater than 60 wt% shows low mechanical strength. As the ZnO content of the composite increased, the porosity and gas permeability of the porous YSZ increased. From the result, it was suggested that ZnO is a candidate to generate pores in YSZ bulk or membrane.

scholarly journals Ionic liquid-assisted formation of cellulose/calcium phosphate hybrid materials

2014 ◽  
Vol 5 ◽  
pp. 1553-1568 ◽  
Author(s):  
Ahmed Salama ◽  
Mike Neumann ◽  
Christina Günter ◽  
Andreas Taubert
Keyword(s):  
Electron Microscopy ◽  
Ionic Liquid ◽  
Calcium Phosphate ◽  
Hybrid Materials ◽  
X Ray Diffraction ◽  
Reaction Conditions ◽  
X Ray ◽  
Transmission Electron ◽  
Regenerative Therapies ◽  
Scanning Electron

Cellulose/calcium phosphate hybrid materials were synthesized via an ionic liquid-assisted route. Scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, infrared spectroscopy, and thermogravimetric analysis/differential thermal analysis show that, depending on the reaction conditions, cellulose/hydroxyapatite, cellulose/chlorapatite, or cellulose/monetite composites form. Preliminary studies with MC3T3-E1 pre-osteoblasts show that the cells proliferate on the hybrid materials suggesting that the ionic liquid-based process yields materials that are potentially useful as scaffolds for regenerative therapies.

Microwave-Assisted Preparation of Cu2O Octahedral Microcrystals

2011 ◽  
Vol 284-286 ◽  
pp. 746-749
Author(s):  
Chong Hai Deng ◽  
Han Mei Hu ◽  
Ming Di Yang
Keyword(s):  
Electron Microscopy ◽  
Solid Solution ◽  
Scanning Electron Microscopy ◽  
Growth Mechanism ◽  
X Ray Diffraction ◽  
Chemical Route ◽  
X Ray ◽  
Microwave Assisted ◽  
Morphology And Structure ◽  
Scanning Electron

In this paper, we reported a facile microwave-assisted green chemical route to prepare pure, uniform, and monodispersed Cu2O octahedron wrapped by the {111} faces by using glucose as a reducing agent. X-ray diffraction (XRD), energy dispersive X-ray spectrometry(EDX) and field emission scanning electron microscopy (FESEM) were used to characterize the as-synthesized products. It was found that the morphology and structure of Cu2O crystals were greatly affected by the concentration of NaOH. A solid-solution-solid growth mechanism was possibly proposed on the basis of the comparative experimental results.

A study on materials interactions between Mo electrode and InGaZnO active layer in InGaZnO-based thin film transistors

2010 ◽  
Vol 25 (2) ◽  
pp. 266-271 ◽  
Author(s):  
Kyung Park ◽  
Chee-Hong An ◽  
Byung-Il Hwang ◽  
Hoo-Jeong Lee ◽  
Hyoungsub Kim ◽  
...  
Keyword(s):  
Thin Film ◽  
Electron Microscopy ◽  
Thin Film Transistors ◽  
Device Performance ◽  
X Ray Diffraction ◽  
Characterization Methods ◽  
X Ray ◽  
Thermodynamics And Kinetics ◽  
Transmission Electron ◽  
Scanning Electron

This study examined the degradation of the device performance of InGaZnO4 (IGZO)-based thin-film transistors after annealing at high temperatures in air ambient. Using various characterization methods including scanning electron microscopy, x-ray diffraction, and transmission electron microscopy, we were able to disclose the details of a two-stage phase transformation that led to the device performance degradation. The Mo electrodes first succumbed to oxidation at moderate temperatures (400∼500 °C) and then the Mo oxide further reacted with IGZO to produce an In–Mo–O compound with some Ga at higher temperatures (600∼700 °C). We analyzed our results based on the thermodynamics and kinetics data available in the literature and confirmed that our findings are in agreement with the experimental results.

Sign in / Sign up

Export Citation Format

Share Document