Study on Experiment and Simulation for Laser Surface Micro Texturing on Cylinder Piston Ring Friction Pair

2014 ◽  
Vol 1033-1034 ◽  
pp. 1317-1320
Author(s):  
Wei Gong ◽  
Fei Dong ◽  
Yun Peng Du ◽  
Ji Lin Xiong
Keyword(s):  
Numerical Simulation ◽  
Laser Pulse ◽  
Piston Ring ◽  
Friction Pair ◽  
Simulation Method ◽  
Experimental Results ◽  
Pulse Interval ◽  
Numerical Simulation Method ◽  
Cylinder Piston ◽  
Micro Cavity

Regarding the cylinder piston ring friction pair system as the object , put forward a new numerical simulation method to study the thermal effect mechanism of single pulse interval laser micro texturing. By means of numerical simulation and experimental verification, analysis the variation of laser pulse frequency and laser power on the 45# steel surface micro cavity morphology. The simulation and experimental results show that along with the increase of laser pulse number, the depth of micro cavity increases, the recasting phenomenon of molten metal is obvious, and the machined surface quality decreases. At the same condition, the micro cavity depth simulation results and experimental results are basically the same trend; the maximum error is less than 8%, which proves the feasibility and validity of the numerical simulation method.

A numerical simulation method for molten material behavior in nuclear reactors

2017 ◽  
Vol 322 ◽  
pp. 301-312 ◽  
Author(s):  
Susumu Yamashita ◽  
Takuya Ina ◽  
Yasuhiro Idomura ◽  
Hiroyuki Yoshida
Keyword(s):  
Numerical Simulation ◽  
Nuclear Reactors ◽  
Simulation Method ◽  
Material Behavior ◽  
Molten Material ◽  
Numerical Simulation Method

Hot Compression Simulation of Ti75 Alloy Based on DEFORM-3D

2012 ◽  
Vol 229-231 ◽  
pp. 55-58
Author(s):  
Jun Fan
Keyword(s):  
Numerical Simulation ◽  
Finite Element ◽  
Simulation Method ◽  
Hot Compression ◽  
Strain Rates ◽  
Know How ◽  
Numerical Simulation Method ◽  
Control Objective ◽  
Finite Element Numerical Simulation ◽  
Deform 3D

To obtain the know-how of the deficiency for the filling capability, taking Ti75 alloy as the research object, at the same height of reducing, strain rates during forming as the control objective, the finite element numerical simulation method was used to simulate the hot compression with DEFORM-3D, analyzing the effect of the strain rates on the distribution of strain and stress.

scholarly journals Study of the Effect of Centrifugal Force on Rotor Blade Icing Process

2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
Zhengzhi Wang ◽  
Chunling Zhu
Keyword(s):  
Numerical Simulation ◽  
Centrifugal Force ◽  
Rotor Blade ◽  
Flow Direction ◽  
Three Dimensional ◽  
Simulation Method ◽  
Two Phase ◽  
Numerical Simulation Method ◽  
Calculation Results ◽  
Flow Field Characteristics

In view of the rotor icing problems, the influence of centrifugal force on rotor blade icing is investigated. A numerical simulation method of three-dimensional rotor blade icing is presented. Body-fitted grids around the rotor blade are generated using overlapping grid technology and rotor flow field characteristics are obtained by solving N-S equations. According to Eulerian two-phase flow, the droplet trajectories are calculated and droplet impingement characteristics are obtained. The mass and energy conservation equations of ice accretion model are established and a new calculation method of runback water mass based on shear stress and centrifugal force is proposed to simulate water flow and ice shape. The calculation results are compared with available experimental results in order to verify the correctness of the numerical simulation method. The influence of centrifugal force on rotor icing is calculated. The results show that the flow direction and distribution of liquid water on rotor surfaces change under the action of centrifugal force, which lead to the increasing of icing at the stagnation point and the decreasing of icing on both frozen limitations.

Numerical Simulation for Uplift Bearing Capacity and Affecting Factors of the Digging Piles in Slope Ground

2013 ◽  
Vol 423-426 ◽  
pp. 1292-1295 ◽  
Author(s):  
Xing Yun Wang ◽  
Bin Peng ◽  
Xiao Chao Tang ◽  
Lian Fan
Keyword(s):  
Numerical Simulation ◽  
Regression Analysis ◽  
Finite Difference ◽  
Bearing Capacity ◽  
Mutual Effect ◽  
Simulation Method ◽  
Affecting Factors ◽  
Slope Ratio ◽  
Nonlinear Regression Analysis ◽  
Numerical Simulation Method

Based on the numerical simulation method, this paper has established the numerical simulation method by using of finite difference software of FLAC3D through establishing interface for digging pile-soil. It can consider mutual effect of digging pile-soil. The uplift bearing capacity of the digging pile in slope ground was calculated and the affecting factors of the bearing capacity were analyzed. The results show that the uplift bearing capacity has a negative correlation with the slope ratio, and has a positive correlation with the width or height of the foundation, which can be expressed as a quadratic polynomial. But when the slope ratio is smaller than a certain extent, the capacity no longer increases. Nonlinear regression analysis of calculation data are carried out. Finally, the calculation method of uplift bearing capacity about pile in the slope is developed, which can provide a reference to specification revision and engineering.

A Pore-Scale Numerical Simulation Method for Estimating the Permeability of Sand Sediment

2012 ◽  
Vol 94 (1) ◽  
pp. 1-17 ◽  
Author(s):  
Toshio Sugita ◽  
Toru Sato ◽  
Shinichiro Hirabayashi ◽  
Jiro Nagao ◽  
Yusuke Jin ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Simulation Method ◽  
Pore Scale ◽  
Numerical Simulation Method
Sign in / Sign up

Export Citation Format

Share Document