Analysis of the Building Materials in the Energy Efficient Buildings

2014 ◽  
Vol 1041 ◽  
pp. 3-6 ◽  
Author(s):  
Michal Kraus ◽  
Darja Kubečková
Keyword(s):  
Thermal Properties ◽  
Greenhouse Gases ◽  
Renewable Resources ◽  
Energy Efficient ◽  
Building Materials ◽  
Energy Performance ◽  
Energy Performance Of Buildings ◽  
Energy Efficient Buildings ◽  
Current Energy

According to the Energy Performance of Buildings Directive (EPBD II) an important role in current construction of buildings plays a constant effort to reduce energy performance, reduce the consumption of non-renewable resources and reduce the production of greenhouse gases. The emphasis is placed on the use of attested and quality building materials with good thermal properties. The aim of the paper is analysis of the building materials in the current energy efficient buildings.

scholarly journals Testing a Gypsum Composite Based on Raw Gypsum with a Direct Admixture of Paraffin and Polymer to Improve Thermal Properties

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3241
Author(s):  
Krzysztof Powała ◽  
Andrzej Obraniak ◽  
Dariusz Heim
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
Thermal Properties ◽  
Phase Change ◽  
Large Scale ◽  
Building Materials ◽  
Residential Buildings ◽  
Energy Performance ◽  
Polymer Content ◽  
Volumetric Heat Capacity

The implemented new legal regulations regarding thermal comfort, the energy performance of residential buildings, and proecological requirements require the design of new building materials, the use of which will improve the thermal efficiency of newly built and renovated buildings. Therefore, many companies producing building materials strive to improve the properties of their products by reducing the weight of the materials, increasing their mechanical properties, and improving their insulating properties. Currently, there are solutions in phase-change materials (PCM) production technology, such as microencapsulation, but its application on a large scale is extremely costly. This paper presents a solution to the abovementioned problem through the creation and testing of a composite, i.e., a new mixture of gypsum, paraffin, and polymer, which can be used in the production of plasterboard. The presented solution uses a material (PCM) which improves the thermal properties of the composite by taking advantage of the phase-change phenomenon. The study analyzes the influence of polymer content in the total mass of a composite in relation to its thermal conductivity, volumetric heat capacity, and diffusivity. Based on the results contained in this article, the best solution appears to be a mixture with 0.1% polymer content. It is definitely visible in the tests which use drying, hardening time, and paraffin absorption. It differs slightly from the best result in the thermal conductivity test, while it is comparable in terms of volumetric heat capacity and differs slightly from the best result in the thermal diffusivity test.

scholarly journals Influence of Lightweight Aggregate Concrete Materials on Building Energy Performance

Buildings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 94
Author(s):  
Tara L. Cavalline ◽  
Jorge Gallegos ◽  
Reid W. Castrodale ◽  
Charles Freeman ◽  
Jerry Liner ◽  
...  
Keyword(s):  
Thermal Properties ◽  
Building Materials ◽  
Energy Savings ◽  
Lightweight Concrete ◽  
Lightweight Aggregate ◽  
Building Energy ◽  
Energy Performance ◽  
Energy Simulation ◽  
Building Energy Simulation ◽  
Building Energy Performance

Due to their porous nature, lightweight aggregates have been shown to exhibit thermal properties that are advantageous when used in building materials such as lightweight concrete, grout, mortar, and concrete masonry units. Limited data exist on the thermal properties of materials that incorporate lightweight aggregate where the pore system has not been altered, and very few studies have been performed to quantify the building energy performance of structures constructed using lightweight building materials in commonly utilized structural and building envelope components. In this study, several lightweight concrete and masonry building materials were tested to determine the thermal properties of the bulk materials, providing more accurate inputs to building energy simulation than have previously been used. These properties were used in EnergyPlus building energy simulation models for several types of commercial structures for which materials containing lightweight aggregates are an alternative commonly considered for economic and aesthetic reasons. In a simple model, use of sand lightweight concrete resulted in prediction of 15–17% heating energy savings and 10% cooling energy savings, while use of all lightweight concrete resulted in prediction of approximately 35–40% heating energy savings and 30% cooling energy savings. In more complex EnergyPlus reference models, results indicated superior thermal performance of lightweight aggregate building materials in 48 of 50 building energy simulations. Predicted energy savings for the five models ranged from 0.2% to 6.4%.

Recommended angle of a modular dynamic façade in hot-arid climate: daylighting and energy simulation

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Seyedeh Samaneh Golzan ◽  
Mina Pouyanmehr ◽  
Hassan Sadeghi Naeini
Keyword(s):  
Energy Consumption ◽  
Energy Efficient ◽  
Energy Performance ◽  
Arid Climate ◽  
Visual Comfort ◽  
Building Envelopes ◽  
Content Type ◽  
Optimum Angle ◽  
Energy Efficient Buildings ◽  
Hot Arid Climate

PurposeThe modular dynamic façade (MDF) concept could be an approach in a comfort-centric design through proper integration with energy-efficient buildings. This study focuses on obtaining and/or calculating an efficient angle of the MDF, which would lead to the optimum performance in daylight availability and energy consumption in a single south-faced official space located in the hot-arid climate of Yazd, Iran.Design/methodology/approachThe methodology consists of three fundamental parts: (1) based on previous related studies, a diamond-based dynamic skin façade was applied to a south-faced office building in a hot-arid climate; (2) the daylighting and energy performance of the model were simulated annually; and (3) the data obtained from the simulation were compared to reach the optimum angle of the MDF.FindingsThe results showed that when the angle of the MDF openings was set at 30°, it could decrease energy consumption by 41.32% annually, while daylight simulation pointed that the space experienced the minimum possible glare at this angle. Therefore, the angle of 30° was established as the optimum angle, which could be the basis for future investment in responsive building envelopes.Originality/valueThis angular study simultaneously assesses the daylight availability, visual comfort and energy consumption on a MDF in a hot-arid climate.

scholarly journals BIM and BEM Methodologies Integration in Energy-Efficient Buildings Using Experimental Design

Buildings ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 491
Author(s):  
Jorge González ◽  
Carlos Alberto Pereira Soares ◽  
Mohammad Najjar ◽  
Assed N. Haddad
Keyword(s):  
Experimental Design ◽  
Energy Efficient ◽  
Thermal Characteristics ◽  
Energy Performance ◽  
Building Envelope ◽  
Climatic Zones ◽  
Energy Efficient Buildings ◽  
Energy Modelling ◽  
Building Information ◽  
Energetic Performance

Linking Building Information Modelling and Building Energy Modelling methodologies appear as a tool for the energy performance analysis of a dwelling, being able to build the physical model via Autodesk Revit and simulating the energy modeling with its complement Autodesk Insight. A residential two-story house was evaluated in five different locations within distinct climatic zones to reduce its electricity demand. Experimental Design is used as a methodological tool to define the possible arrangement of results emitted via Autodesk Insight that exhibits the minor electric demand, considering three variables: Lighting efficiency, Plug-Load Efficiency, and HVAC systems. The analysis concluded that while the higher the efficiency of lighting and applications, the lower the electric demand. In addition, the type of climate and thermal characteristics of the materials that conform to the building envelope have significant effects on the energetic performance. The adjustment of different energetic measures and its comparison with other climatic zones enable decision-makers to choose the best combination of variables for developing strategies to lower the electric demand towards energy-efficient buildings.

scholarly journals Understanding the Reasons behind the Energy Performance Gap of an Energy-Efficient Building, through a Probabilistic Approach and On-Site Measurements

Energies ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 6178
Author(s):  
Pierryves Padey ◽  
Kyriaki Goulouti ◽  
Guy Wagner ◽  
Blaise Périsset ◽  
Sébastien Lasvaux
Keyword(s):  
Energy Efficient ◽  
Probabilistic Approach ◽  
Energy Performance ◽  
High Energy ◽  
Performance Gap ◽  
Post Evaluation ◽  
Energy Efficient Buildings ◽  
Ex Post ◽  
The Difference ◽  
Energy Efficient Building

The performance gap, defined as the difference between the measured and the calculated performance of energy-efficient buildings, has long been identified as a major issue in the building domain. The present study aims to better understand the performance gap in high-energy performance buildings in Switzerland, in an ex-post evaluation. For an energy-efficient building, the measured heating demand, collected through a four-year measurement campaign was compared to the calculated one and the results showed that the latter underestimates the real heating demand by a factor of two. As a way to reduce the performance gap, a probabilistic framework was proposed so that the different uncertainties of the model could be considered. By comparing the mean of the probabilistic heating demand to the measured one, it was shown that the performance gap was between 20–30% for the examined period. Through a sensitivity analysis, the active air flow and the shading factor were identified as the most influential parameters on the uncertainty of the heating demand, meaning that their wrong adjustment, in reality, or in the simulations, would increase the performance gap.

Thermal Insulation Of The Foundation Walls Of Buildings And Calculation Of Its Thickness

2021 ◽  
Vol 03 (04) ◽  
pp. 70-78
Author(s):  
Tulakov Elmurad Salomovich ◽  
◽  
Matyokubov Bobur Pulatovich ◽  
Keyword(s):  
Surface Temperature ◽  
Thermal Insulation ◽  
Energy Efficient ◽  
Building Materials ◽  
The Body ◽  
Dew Point ◽  
Dew Point Temperature ◽  
Energy Efficient Buildings ◽  
Basement Walls ◽  
External Barrier

If the surface temperature of any building material drops sharply without changing the humidity and the surface temperature is lower than the dew point temperature, dew-like water droplets are formed on the surface of this material. This condition is called condensing humidity condition. Condensation moisture formed on the surfaces of building materials and external barriers is slowly absorbed into the body of building materials over time, increasing the relative humidity of this structure. Condensation moisture can be observed when the temperature of the surfaces of external barrier structures drops sharply. This condition can be observed everywhere where the basement is connected to the outer walls of the basement. The article deals with the issue of thermal insulation and calculation of basement walls of modern energy-efficient buildings, which are widely used in the country and abroad.

scholarly journals The Performance Gap in Energy-Efficient Office Buildings: How the Occupants Can Help?

Energies ◽  
2020 ◽  
Vol 13 (6) ◽  
pp. 1480 ◽  
Author(s):  
Qadeer Ali ◽  
Muhammad Jamaluddin Thaheem ◽  
Fahim Ullah ◽  
Samad M. E. Sepasgozar
Keyword(s):  
Energy Efficient ◽  
Behavioral Interventions ◽  
Energy Use ◽  
Energy Savings ◽  
Energy Performance ◽  
Office Buildings ◽  
Occupant Behavior ◽  
Energy Usage ◽  
Performance Gap ◽  
Energy Efficient Buildings

Rising demand and limited production of electricity are instrumental in spreading the awareness of cautious energy use, leading to the global demand for energy-efficient buildings. This compels the construction industry to smartly design and effectively construct these buildings to ensure energy performance as per design expectations. However, the research tells a different tale: energy-efficient buildings have performance issues. Among several reasons behind the energy performance gap, occupant behavior is critical. The occupant behavior is dynamic and changes over time under formal and informal influences, but the traditional energy simulation programs assume it as static throughout the occupancy. Effective behavioral interventions can lead to optimized energy use. To find out the energy-saving potential based on simulated modified behavior, this study gathers primary building and occupant data from three energy-efficient office buildings in major cities of Pakistan and categorizes the occupants into high, medium, and low energy consumers. Additionally, agent-based modeling simulates the change in occupant behavior under the direct and indirect interventions over a three-year period. Finally, energy savings are quantified to highlight a 25.4% potential over the simulation period. This is a unique attempt at quantifying the potential impact on energy usage due to behavior modification which will help facility managers to plan and execute necessary interventions and software experts to develop effective tools to model the dynamic usage behavior. This will also help policymakers in devising subtle but effective behavior training strategies to reduce energy usage. Such behavioral retrofitting comes at a much lower cost than the physical or technological retrofit options to achieve the same purpose and this study establishes the foundation for it.

The Statistical Verification of Significance of Airtightness and Energy Performance

2015 ◽  
Vol 789-790 ◽  
pp. 1181-1184
Author(s):  
Michal Kraus ◽  
Kateřina Kubeková ◽  
Darja Kubečková
Keyword(s):  
Energy Demand ◽  
Energy Performance ◽  
Primary Energy ◽  
Building Envelope ◽  
Key Factors ◽  
Energy Performance Of Buildings ◽  
Energy Efficient Buildings ◽  
Statistical Verification ◽  
Low Energy Consumption

The main objective of the paper is to confirm or exclude a statistically significant impact of airtightness on the energy performance of buildings. Energy performance of buildings is characterized by a specific energy demand for heating and specific total primary energy. Airtightness is one of the key factors of energy efficient buildings. The quality of airtight building envelope except for low energy consumption also minimizes the risk of damage to the structure associated with the spread of the heat and water vapor in the structure.

scholarly journals The Discrepancy between As-Built and As-Designed in Energy Efficient Buildings: A Rapid Review

2020 ◽  
Vol 12 (16) ◽  
pp. 6372
Author(s):  
Christine Eon ◽  
Jessica K. Breadsell ◽  
Joshua Byrne ◽  
Gregory M. Morrison
Keyword(s):  
Life Cycle ◽  
Energy Efficient ◽  
Building Energy ◽  
Energy Performance ◽  
Rapid Review ◽  
Building Performance ◽  
Performance Gap ◽  
Energy Efficient Buildings ◽  
Building Life Cycle ◽  
Building Standards

Energy efficient buildings are viewed as one of the solutions to reduce carbon emissions from the built environment. However, studies worldwide indicate that there is a significant gap between building energy targets (as-designed) and the actual measured building energy consumption (as-built). Several underlying causes for the energy performance gap have been identified at all stages of the building life cycle. Focus is generally on the post-occupancy stage of the building life cycle. However, issues relating to the construction and commissioning stages of the building are a major concern, though not usually researched. There is uncertainty on how to address the as-designed versus as-built gap. The objective of this review article is to identify causes for the energy performance gap in buildings in relation to the post-design and pre-occupancy stages and review proposed solutions. The methodology applied in this research is the rapid review, which is a variant of the systematic literature review method. Findings suggest that causes for discrepancies between as-designed and as-built energy performance during the construction and commissioning stages relate to a lack of knowledge and skills, lack of communication between stakeholders and a lack of accountability for building performance post-occupancy. Recommendations to close this gap during this period include better training, improved communication standards, collaboration, energy evaluations based on post-occupancy performance, transparency of building performance, improved testing and verification and reviewed building standards.

scholarly journals ENERGY‐EFFICIENT ASSET MANAGEMENT FOR PROFESSIONAL LANDLORDS

2008 ◽  
Vol 12 (1) ◽  
pp. 19-34 ◽  
Author(s):  
Jan-Willem Smid ◽  
Nico Nieboer
Keyword(s):  
Energy Conservation ◽  
Asset Management ◽  
Energy Efficient ◽  
Co2 Reduction ◽  
Energy Performance ◽  
Building Stock ◽  
Energy Performance Of Buildings ◽  
New Construction ◽  
A Minor ◽  
Minor Extent

CO2 reduction by means of energy conservation is an important topic in many governmental environmental policies. As new construction accounts for a fraction of the total building stock, the energy performance of existing dwellings is of great importance. Professional landlords can play a major role in energy conservation, but there are indications that the large energy conservation potential in their housing existing stock is only exploited to a minor extent. This paper presents a method to implement the topic energy conservation in the asset management of professional landlords, in order to establish an integration of energy conservation in their maintenance and renovation practice. This method is described in relation to the asset management of Dutch social housing landlords, but may also be useful for other professional landlords. The method takes advantage of the European EPBD (Energy Performance of Buildings Directive). Santrauka CO2 mažinimas taupant energija ‐ svarbi tema dažnoje valstybineje aplinkos apsaugos politikoje. Kadangi naujos statybos sudaro tik maža visu pastatu ištekliu dali, jau pastatytu bûstu energinis naudingumas labai svarbus. Profesionaliu nuomotoju vaidmuo taupant energija gali būti svarbus, tačiau yra ženklu, kad didžiulis ju turimu jau pastatytu būstu energijos taupymo potencialas išnaudojamas nedaug. Šiame darbe pristatomas metodas, kaip energijos taupymo tema itraukti i profesionaliu nuomotoju turto valdyma, kad energijos taupymas taptu ju priežiūros ir renovacijos praktikos dalis. Metodo aprašymas remiasi Olandijos socialinio būsto savininku turto valdymo praktika, bet jis gali būti naudingas ir kitiems profesionaliems nuomotojams. Metodas pagristas Europos EPBD (Direktyva del pastatu energetinio naudingumo).

Sign in / Sign up

Export Citation Format

Share Document