Ballistic Performance Evaluation of Kevlar-Glass Fibre Hybrid Composite Laminate against Medium Velocity Impact

2021 ◽  
Vol 1165 ◽  
pp. 47-64
Author(s):  
Saurabh S. Kumar ◽  
Rajesh G. Babu ◽  
U. Magarajan
Keyword(s):  
Energy Absorption ◽  
Specific Energy ◽  
Glass Fibre ◽  
Hybrid Composite ◽  
Composite Laminates ◽  
Areal Density ◽  
Ballistic Performance ◽  
Performance Requirement ◽  
Specific Energy Absorption ◽  
Fabric Composite

In this paper, the post ballistic impact behaviour of kevlar-glass fibre hybrid composite laminates was investigated against 9×19 mm projectile. Eight different types of composite laminates with different ratios of kevlar woven fibre to glass fibre were fabricated using hand lay-up with epoxy matrix. Ballistic behaviour like ballistic Limit (V50), energy absorption, specific energy absorption and Back Face Signature (BFS) were studied after bullet impact. The results indicated that as the Percentage of glass fibre is increased there was a linear increment in the ballistic behaviour. Addition of 16% kevlar fabric, composite sample meets the performance requirement of NIJ0101.06 Level III-A. Since the maximum specific energy absorption was observed in Pure Kevlar samples and the adding of glass fibre increases the weight and Areal Density of the sample, further investigations need to be carried out to utilize the potential of glass fibre for ballistic applications.

scholarly journals Experimental and Numerical Investigation of the Effect of Projectile Nose Shape on the Deformation and Energy Dissipation Mechanisms of the Ultra-High Molecular Weight Polyethylene (UHMWPE) Composite

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4208
Author(s):  
Yonghua Shen ◽  
Yangwei Wang ◽  
Zhaopu Yan ◽  
Xingwang Cheng ◽  
Qunbo Fan ◽  
...  
Keyword(s):  
Molecular Weight ◽  
High Molecular Weight ◽  
Energy Absorption ◽  
Specific Energy ◽  
Ballistic Performance ◽  
Specific Energy Absorption ◽  
Ballistic Resistance ◽  
Nose Shape ◽  
Ultra High Molecular Weight ◽  
Uhmwpe Composite

The effect of projectile nose shape on the ballistic performance of the ultra-high molecular weight polyethylene (UHMWPE) composite was studied through experiments and simulations. Eight projectiles such as conical, flat, hemispherical, and ogival nose projectiles were used in this study. The deformation process, failure mechanisms, and the specific energy absorption (SEA) ability were systematically investigated for analyzing the ballistic responses on the projectile and the UHMWPE composite. The results showed that the projectile nose shape could invoke different penetration mechanisms on the composite. The sharper nose projectile tended to shear through the laminate, causing localized damage zone on the composite. For the blunt nose projectile penetration, the primary deformation features were the combination of shear plugging, tensile deformation, and large area delamination. The maximum value of specific energy absorption (SEA) was 290 J/(kg/m2) for the flat nose projectile penetration, about 3.8 times higher than that for the 30° conical nose projectile. Furthermore, a ballistic resistance analytical model was built based on the cavity expansion theory to predict the energy absorption ability of the UHMWPE composite. The model exhibited a good match between the ballistic resistance curves in simulations with the SEA ability of the UHMWPE composite in experiments.

Numerical Evaluation of Stiffness and Energy Absorption of a Hybrid Unidirectional/Random Glass Fiber Composite

2011 ◽  
Vol 133 (4) ◽  
Author(s):  
Wensong Yang ◽  
Assimina A. Pelegri
Keyword(s):  
Finite Element ◽  
Glass Fiber ◽  
Energy Absorption ◽  
Specific Energy ◽  
Hybrid Composite ◽  
Fiber Composite ◽  
Element Model ◽  
Specific Energy Absorption ◽  
Cross Section Area ◽  
Glass Fiber Composite

A finite element method is employed to numerically evaluate the stiffness and energy absorption properties of an architecturally hybrid composite material consisting of unidirectional and random glass fiber layers. An ls-dyna finite element model of a composite hollow square tube is developed in which the position of the random fiber layers varies through the thickness. The assessment of the stiffness and energy absorption is performed via three-point impact and longitudinal crash tests at two speeds, 15.6 m/s (35 mph) and 29.0 m/s (65 mph), and five strain rates, ɛ· = 0.1 s−1, 1 s−1, 10 s−1, 20 s−1, and 40 s−1. It is suggested that strategic positioning of the random fiber microstructural architecture into the hybrid composite increases its specific absorption energy and, therefore, enhances its crashworthiness. The simulation data indicate that the composite structure with outer layers of unidirectional lamina followed by random fiber layers is the stiffest due to the considerable superior specific energy absorption of the random fiber micro-architecture. Moreover, it is illustrated that the specific energy absorption increases with the increased ratio of impact contact area over cross-section area. Of all the parameters tested the thickness of the unidirectional laminate on the specific energy absorption does not appear to have a significant effect at the studied thickness ratios.

The crushing characteristics of reinforced Nomex honeycomb

2018 ◽  
Vol 37 (20) ◽  
pp. 1267-1276 ◽  
Author(s):  
RA Alia ◽  
S Rao ◽  
R Umer ◽  
J Zhou ◽  
C Zheng ◽  
...  
Keyword(s):  
Energy Absorption ◽  
Specific Energy ◽  
Compression Strength ◽  
Small Diameter ◽  
Areal Density ◽  
Mechanical Tests ◽  
Stable Model ◽  
Specific Energy Absorption ◽  
Nomex Honeycomb ◽  
Energy Absorbing

A Nomex honeycomb core has been reinforced with small diameter composite rods and tubes in order to enhance its compression properties and energy-absorbing characteristics. The influence of the areal density of the rods and tubes on the strength and energy-absorbing properties of the reinforced honeycomb was investigated by introducing increasing numbers of rods/tubes in square samples with bonded composite skins. An initial series of crushing tests on arrangements of small tubes and rods resulted in a stable model of failure yielding specific energy absorption values of approximately 45 kJ/kg for the tube and rod-based structures. A subsequent observation of the failed tubes highlighted the similar failure processes to those observed previously following the tests on much larger composite cylinders. Mechanical tests on the Nomex cores have shown that the compression strength and energy-absorbing characteristics of the reinforced honeycombs increase rapidly with increasing composite reinforcement. At low and intermediate values of core density, the rod and tube-reinforced cores exhibited similar properties, in terms of their compression strengths and specific energy absorption, an effect that is likely to be due to the dominance of the heavier Nomex core in these samples. At higher densities, the rod-reinforced systems tended to out-perform their tube-reinforced counterparts. Tests at impact rates of strain have shown that the compression strength and energy-absorbing capabilities of the reinforced cores are higher under the dynamic conditions, with the rod-reinforced cores offering values of specific energy absorption as high as 78 kJ/kg.

Dynamic Axial Compression of Square CFRP/Aluminium Tubes

2019 ◽  
Vol 794 ◽  
pp. 202-207
Author(s):  
Rafea Dakhil Hussein ◽  
Dong Ruan ◽  
Guo Xing Lu ◽  
Jeong Whan Yoon ◽  
Zhan Yuan Gao
Keyword(s):  
Energy Absorption ◽  
Specific Energy ◽  
Fibre Composite ◽  
Dynamic Tests ◽  
Carbon Fibre Composite ◽  
Specific Energy Absorption ◽  
Static Tests ◽  
Crushing Force ◽  
Cfrp Tubes ◽  
The Impact

Carbon fibre composite tubes have high strength to weight ratios and outstanding performance under axial crushing. In this paper, square CFRP tubes and aluminium sheet-wrapped CFRP tubes were impacted by a drop mass to investigate the effect of loading velocity on the energy absorption of CFRP/aluminium tubes. A comparison of the quasi-static and dynamic crushing behaviours of tubes was made in terms of deformation mode, peak crushing force, mean crushing force, energy absorption and specific energy absorption. The influence of the number of aluminium layers that wrapped square CFRP tubes on the crushing performance of tubes under axial impact was also examined. Experimental results manifested similar deformation modes of tubes in both quasi-static and dynamic tests. The dynamic peak crushing force was higher than the quasi-static counterpart, while mean crushing force, energy absorption and specific energy absorption were lower in dynamic tests than those in quasi-static tests. The mean crushing force and energy absorption decreased with the crushing velocity and increased with the number of aluminium layers. The impact stroke (when the force starts to drop) decreased with the number of aluminium layers.

Effect of Varied Layer-Content/Thickness on Ballistic Performance of a Functionally Graded Al2O3/ZrO2 Material

2018 ◽  
Vol 928 ◽  
pp. 243-248 ◽  
Author(s):  
Yu Liang Chen ◽  
Chin Yu Huang
Keyword(s):  
Energy Absorption ◽  
Ceramic Composite ◽  
Single Layer ◽  
Areal Density ◽  
Wave Impedance ◽  
Functionally Graded ◽  
Ballistic Performance ◽  
Graded Material ◽  
Stress Damage ◽  
Transmission And Reflection

This study compared the ballistic performance of alumina (Al2O3)/ zirconia (ZrO2) functionally graded material (FGM) specimens with various levels of thickness and ZrO2 content and a pure Al2O3 single-layer ceramic composite (PCM). Ballistic tests were conducted with 0.3-inch armor-piercing (AP) projectiles, and finite element code LS-DYNA was used to examine energy absorption, stress distribution, and ceramic cone failure in the specimens. The findings are as follows: First, regarding energy absorption per unit of areal density, the 5% FGMs had the highest ballistic performance, which increased by up to 8%. By contrast, the ballistic performance of the 15% FGMs declined significantly to lower than that of the PCM. Second, the capability of the ceramic cone to withstand stress damage and projectiles was significantly greater in the 5% FGMs than in the 15% FGMs. Third, the wave impedance variations increased with the ZrO2 content in each layer, thereby enhancing the interactions between impact waves and aggravating ceramic damage. Thus, the intensities of transmission and reflection waves in the 15% FGMs increased, thereby causing reductions in its ballistic performance.

Enhancement in specific energy absorption of invertubes

2019 ◽  
Vol 159 ◽  
pp. 424-440 ◽  
Author(s):  
T.J. Reddy ◽  
V. Narayanamurthy ◽  
Y.V.D. Rao
Keyword(s):  
Energy Absorption ◽  
Specific Energy ◽  
Specific Energy Absorption

Crashworthiness performance of concentric structures with different cross-sectional shapes under multiple loading conditions

2020 ◽  
pp. 095440702096188
Author(s):  
Sadjad Pirmohammad
Keyword(s):  
Energy Absorption ◽  
Specific Energy ◽  
Absorption Maximum ◽  
Element Model ◽  
Hexagonal Structure ◽  
Loading Conditions ◽  
Cross Sectional ◽  
Specific Energy Absorption ◽  
Multiple Loading ◽  
Energy Absorbing

This paper evaluates the crashworthiness performance of concentric structures with different numbers of tubes (i.e. one to five) and cross-sectional shapes (i.e. hexagon, octagon, decagon and circle) under the multiple loadings of θ = 0, 10, 20 and 30°. An experimentally validated finite element model generated in LS-DYNA is employed to calculate the crashworthiness parameters including the specific energy absorption, maximum crush force and crush force efficiency. A total of 20 concentric structures are analyzed to explore the effects of number of tubes and cross-sectional shapes on the crushing performance. A multi-criteria decision-making method known as TOPSIS is also used to compare and rank the concentric structures in terms of crushing performance. Based on the results, the hexagonal structure including two tubes and octagonal, decagonal and circular structures including three tubes demonstrate the best results among their corresponding cross-sectional shapes. These structures show 9, 39, 38 and 39% higher specific energy absorption compared to their corresponding single tubal cases, respectively. However, in comparison to single tubal cases, they generate 4, 57, 57 and 58% higher maximum crush force, respectively. As such, the values for the improvement of the crush force efficiency are 3, 26, 25 and 21%, respectively. Furthermore, the decagonal structure including three tubes provides the highest energy absorbing characteristics as compared with all the other structures studied in this research. Meanwhile, taking into account all the multiple loading conditions, this structure shows 50% higher specific energy absorption than the hexagonal structure including single tube (as the weakest structure).

Cushioning energy absorption of composite layered structures including paper corrugation, paper honeycomb and expandable polyethylene

2019 ◽  
Vol 54 (3) ◽  
pp. 176-191 ◽  
Author(s):  
Yanfeng Guo ◽  
Meijuan Ji ◽  
Yungang Fu ◽  
Dan Pan ◽  
Xingning Wang ◽  
...  
Keyword(s):  
Energy Absorption ◽  
Specific Energy ◽  
Peak Stress ◽  
Layered Structures ◽  
Absorption Efficiency ◽  
Compression Stress ◽  
Static Compression ◽  
Specific Energy Absorption ◽  
Energy Absorption Efficiency ◽  
Paper Honeycomb

The composite layered structures including paper corrugation, paper honeycomb and expandable polyethylene are innovative structures of cushioning energy absorption, and the compression and impact resistances of the expandable polyethylene can be enhanced by laminating the corrugated paperboard or honeycomb paperboard. This article evaluated the compression performance and cushioning energy absorption of the composite layered structures by the static compression and drop impact compression tests. On one hand, the static compression properties showed that the total energy absorption, energy absorption per unit volume and stroke efficiency of the composite layered structures were all higher than those of expandable polyethylene. The specific energy absorption was enhanced with the increase in compression strain but almost not affected by the compression rate. The specific energy absorption of the composite layered structures including the expandable polyethylene and honeycomb paperboard was greater than those of the expandable polyethylene and corrugated paperboard. The energy absorption efficiency of the composite layered structures including the expandable polyethylene and corrugated paperboard was large for the low compression stress level, yet that of the composite layered structures including the expandable polyethylene and honeycomb paperboard was large for the high compression stress level. On the other hand, the dynamic compression characteristics showed that the peak stress, energy absorption per unit area, energy absorption per unit volume and specific energy absorption of the composite layered structures embodying paper sandwich cores and expandable polyethylene had linear increasing trends with the increase of drop shock energy. At the same drop impact condition, the composite layered structures including the honeycomb paperboard and expandable polyethylene had better cushioning energy absorption, the peak stress decreased by 23.6% on average, the energy absorption efficiency raised by 8.85% on average and the specific energy absorption increased by 18.1% on average than those including the corrugated paperboard and expandable polyethylene. Therefore, the corrugated paperboard and honeycomb paperboard can helpfully improve the cushioning energy absorption of the expandable polyethylene, and the composite layered structures embodying the expandable polyethylene, corrugated paperboard and honeycomb paperboard may hold excellent packaging protection.

Effect of the Fine Recycled Aggregates on the Dynamic Compressive Behavior of Recycled Mortar

2020 ◽  
Vol 991 ◽  
pp. 62-69
Author(s):  
Sallehan Ismail ◽  
Mohamad Asri Abd Hamid ◽  
Zaiton Yaacob
Keyword(s):  
Compressive Strength ◽  
Strain Rate ◽  
Energy Absorption ◽  
Specific Energy ◽  
Split Hopkinson Pressure Bar ◽  
Recycled Aggregates ◽  
Fine Aggregate ◽  
Peak Strain ◽  
Specific Energy Absorption ◽  
The Impact

This study aims to investigate the dynamic behavior of recycled mortar under impact loading using a split Hopkinson pressure bar (SHPB). Several mortar mixtures were produced by adding various fine recycled aggregates (FRA) to the mixture in replacement percentages of 0%, 25%, 50%, 75%, and 100% of the natural fine aggregate (NFA). The effects of strain rate on compressive strength and specific energy absorption were obtained. Results show that the dynamic compressive strength and specific energy absorption of recycled mortar are highly strain rate dependent; specifically, they increase nearly linearly with the increase in peak strain rate. However, the compressive strength and specific energy absorption of recycled mortar are generally lower than those of NFA mortar (reference samples) under similar high strain rates. The findings of this research can help researchers and construction practitioners to ascertain the appropriate mix design procedure to optimize the impact strength properties of recycled mortar for protective structural application.

Sign in / Sign up

Export Citation Format

Share Document