Experimental Testing of Fiber Reinforced Polymer-Concrete Composite Beam

2010 ◽  
Vol 168-170 ◽  
pp. 549-552
Author(s):  
Yan Lei Wang ◽  
Qing Duo Hao ◽  
Jin Ping Ou
Keyword(s):  
Composite Beam ◽  
Experimental Testing ◽  
Coarse Sand ◽  
Fiber Reinforced Polymer ◽  
Bending Test ◽  
Polymer Concrete ◽  
Fiber Reinforced ◽  
Four Point Bending ◽  
Reinforced Polymer ◽  
Box Beam

A new form of fiber reinforced polymer (FRP)-concrete composite beam is proposed in this study. The proposed composite beam consists of a GFRP box beam combined with a thin layer of concrete in the compression zone. The interaction between the GFRP beam and the concrete was obtained by bonding coarse-sand on the top flange of the GFRP beam. One GFRP box beam and one GFRP-concrete composite beam were investigated in four-point bending test. Load-deflection response, mid-span longitudinal strain distributions and interface slip between GFRP beam and the concrete for the proposed composite beam were studied. Following conclusions are drawn from this study: (1) the stiffness and strength of the composite beam has been significantly increased, and the cost-to-stiffness ratio of the composite beam has been drastically reduced comparing with GFRP-only box beam; (2) a good composite action has been achieved between the GFRP beam and the concrete; (3) crushing of concrete in compression defines flexural collapse of the proposed composite beam..

Recent developments in experimental and computational studies of hygrothermal effects on the bond between FRP and concrete

2020 ◽  
Vol 39 (11-12) ◽  
pp. 422-442 ◽  
Author(s):  
Faisal M Mukhtar ◽  
Olaniyi Arowojolu
Keyword(s):  
Experimental Testing ◽  
Fiber Reinforced Polymer ◽  
Effect Of Temperature ◽  
Polymer Concrete ◽  
Fiber Reinforced ◽  
Bond Performance ◽  
Reinforced Polymer ◽  
Temperature And Humidity ◽  
Externally Bonded ◽  
New Research

The performance of fiber reinforced polymer externally bonded to concrete is greatly influenced by the environmental conditions to which it is exposed during service. Temperature and humidity are the two common environmental factors that alter the bond behavior of externally bonded fiber reinforced polymer. This paper reviews the experimental and computational approaches used to evaluate the hygrothermal effects—that is, the effect of temperature and humidity—on the durability of the fiber reinforced polymer–concrete bond, as well as on the bond’s performance under loading conditions. Some experimental testing conducted in the laboratory and in situ are critically reviewed and presented. Implemented approaches for improving bond performance under hygrothermal conditions and their modeling techniques are also presented. The paper concludes by discussing the review’s salient issues. The ongoing wide application of externally bonded fiber reinforced polymer creates opportunities for new research on improving and predicting the bond strength of fiber reinforced polymer concrete under hygrothermal conditions.

scholarly journals Modeling Punching Shear Capacity of Fiber-Reinforced Polymer Concrete Slabs: A Comparative Study of Instance-Based and Neural Network Learning

2017 ◽  
Vol 2017 ◽  
pp. 1-11 ◽  
Author(s):  
Nhat-Duc Hoang ◽  
Duy-Thang Vu ◽  
Xuan-Linh Tran ◽  
Van-Duc Tran
Keyword(s):  
Neural Network ◽  
Regression Model ◽  
Shear Capacity ◽  
Fiber Reinforced Polymer ◽  
Punching Shear ◽  
Polymer Concrete ◽  
Concrete Slabs ◽  
Fiber Reinforced ◽  
Reinforced Concrete Slabs ◽  
Reinforced Polymer

This study investigates an adaptive-weighted instanced-based learning, for the prediction of the ultimate punching shear capacity (UPSC) of fiber-reinforced polymer- (FRP-) reinforced slabs. The concept of the new method is to employ the Differential Evolution to construct an adaptive instance-based regression model. The performance of the proposed model is compared to those of Artificial Neural Network (ANN) and traditional formula-based methods. A dataset which contains the testing results of FRP-reinforced concrete slabs has been collected to establish and verify new approach. This study shows that the investigated instance-based regression model is capable of delivering the prediction result which is far more accurate than traditional formulas and very competitive with the black-box approach of ANN. Furthermore, the proposed adaptive-weighted instanced-based learning provides a means for quantifying the relevancy of each factor used for the prediction of UPSC of FRP-reinforced slabs.

Applied Element Method Simulation of Fiber Reinforced Polymer and Polypropylene Composite Retrofitted Masonry Walls

2014 ◽  
Vol 17 (11) ◽  
pp. 1567-1583 ◽  
Author(s):  
Saleem M. Umair ◽  
Muneyoshi Numada ◽  
Kimiro Meguro
Keyword(s):  
Numerical Model ◽  
Research Work ◽  
Masonry Wall ◽  
Fiber Reinforced Polymer ◽  
Bending Test ◽  
Fiber Reinforced ◽  
Reinforced Polymer ◽  
Out Of Plane ◽  
Applied Element Method ◽  
Element Method

In current research work, an attempt is made to simulate the behavior of a newly proposed composite material using 3-D Applied Element Method (AEM). Fiber Reinforced Polymer (FRP) being a strong material provides a significant increase in shear strength. Polypropylene band (PP-band) not only holds the masonry wall system into a single unit but also provides a fairly high deformation capacity at a very low cost of retrofitting. A composite of FRP and PP-band is proposed and applied on the surface of masonry wall. Verification of the proposed numerical model is achieved by conducting experiments on twelve masonry wallets. Out of twelve, six masonry wallets were tested in out of plane bending test and six were tested under in-plane forces in the form of diagonal compression test. Same wallet retrofitting scheme was selected for in-plane and out of plane experiments and all of them were analyzed using proposed 3-D AEM numerical simulation tool. Proposed numerical model has served satisfactory and has shown a fairly good agreement with experimental results which encourages the use of 3D-AEM to numerically simulate the behavior of non-retrofitted and retrofitted masonry wallets.

scholarly journals Strengthening Reinforced Concrete Beams with CFRP and GFRP

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Mehmet Mustafa Önal
Keyword(s):  
Concrete Beams ◽  
Reinforced Concrete Beams ◽  
Fiber Reinforced Polymer ◽  
Strength Increase ◽  
Fiber Reinforced ◽  
Flexural Stress ◽  
Four Point Bending ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced ◽  
Reinforced Beams

Concrete beams were strengthened by wrapping the shear edges of the beams twice at 45° in opposite directions by either carbon fiber reinforced polymer (CFRP) or glass fiber reinforced polymer (GFRP). The study included 3 CFRP wrapped beams, 3 GFRP wrapped beams, and 3 control beams, all of which were 150×250×2200 mm and manufactured with C20 concrete and S420a structural steel at the Gazi University Technical Education Faculty labs, Turkey. Samples in molds were cured by watering in the open air for 21 days. Four-point bending tests were made on the beam test specimens and the data were collected. Data were evaluated in terms of load displacement, bearing strength, ductility, and energy consumption. In the CFRP and GFRP reinforced beams, compared to controls, 38% and 42%, respectively, strength increase was observed. In all beams, failure-flexural stress occurred in the center as expected. Most cracking was observed in the flexural region 4. A comparison of CFRP and GFRP materials reveals that GFRP enforced parts absorb more energy. Both materials yielded successful results. Thicker epoxy application in both CFRP and GFRP beams was considered to be effective in preventing break-ups.

Sign in / Sign up

Export Citation Format

Share Document