Synthesis and Magnetic Properties of FePt /Silica Core-Shell Nanoparticles

2010 ◽  
Vol 178 ◽  
pp. 291-295 ◽  
Author(s):  
Cui Xia Li ◽  
Zhi Hong Li ◽  
Xue Yan Du ◽  
Hai Xia Guo
Keyword(s):  
Magnetic Properties ◽  
Reverse Micelles ◽  
Core Shell ◽  
Fept Nanoparticles ◽  
Face Centered Cubic ◽  
X Ray Diffraction ◽  
Shell Nanoparticles ◽  
Transmission Electron ◽  
Face Centered ◽  
Core Shell Nanoparticles

FePt nanoparticles (NPS), ~2nm in diameter, were synthesized and then coated with silica (SiO2) shells ~1.5nm-thick using reverse micelles as nanoreactors. The silica-coated FePt core–shell (FePt @silica) NPS were characterized by direct techniques of transmission electron microscopy (TEM). The results showed that the silica shells prevented the aggregation in liquid comparing to their bare counterparts. The as-synthesized FePt@SiO2 NPS exhibited essential characteristics of superparamagnetic behavior, as investigated by a vibrating sample magnetometer (VSM). X-ray diffraction (XRD) studies proved that the annealing at 700 °C for 30min under argon atmosphere caused the crystal structure of FePt core to transform from disordered face centered cubic (fcc) to the chemically ordered L10 FePt with face-centered tetragonal (fct) structure. This phase transition caused the change of magnetic properties of the FePt@SiO2 particles from superparamagnetism to ferromagnetism.

Monodisperse Fe3O4/Fe Core/Shell Nanoparticles with Enhanced Magnetic Property

2011 ◽  
Vol 306-307 ◽  
pp. 410-415
Author(s):  
Li Sun ◽  
Fu Tian Liu ◽  
Qi Hui Jiang ◽  
Xiu Xiu Chen ◽  
Ping Yang
Keyword(s):  
Average Diameter ◽  
Chemical Precipitation ◽  
Precipitation Method ◽  
Core Shell ◽  
X Ray Diffraction ◽  
Shell Nanoparticles ◽  
X Ray ◽  
Transmission Electron ◽  
Shell Particles ◽  
Core Shell Nanoparticles

Core/shell type nanoparticles with an average diameter of 20nm were synthesized by chemical precipitation method. Firstly, Monodisperse Fe3O4 nanoparticles were synthesized by solvethermal method. FeSO4ž7H2O and NaBH4 were respectively dissolved in distilled water, then moderated Fe3O4 particles and surfactant(PVP) were ultrasonic dispersed into the FeSO4ž7H2O solution. The resulting solution was stirred 2 h at room temperature. Fe could be deposited on the surface of monodispersed Fe3O4 nanoparticles to form core-shell particles. The particles were characterized by using various experimental techniques, such as transmission electron microscopy (TEM), X-ray diffraction (XRD), AGM and DTA. The results suggest that the saturation magnetization of the nanocomposites is 100 emu/g. The composition of the samples show monodisperse and the sides of the core/shell nanoparticles are 20-30nm. It is noted that the formation of Fe3O4/Fe nanocomposites magnetite nanoparticles possess superparamagnetic property.

Synthesis and Magnetic Properties of FePt Nanoparticles with Hard Nonmagnetic Shells

2007 ◽  
Vol 7 (1) ◽  
pp. 350-355 ◽  
Author(s):  
Shishou Kang ◽  
Shifan Shi ◽  
G. X. Miao ◽  
Zhiyong Jia ◽  
David E. Nikles ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Crystallographic Orientation ◽  
Sol Gel ◽  
Molar Ratio ◽  
Core Shell ◽  
Fept Nanoparticles ◽  
Shell Nanoparticles ◽  
Spherical Core ◽  
Size And Morphology ◽  
Core Shell Nanoparticles

Chemically synthesized FePt nanoparticles were coated with nonmagnetic SiO2 and MnO shells by sol–gel and polyol processes. TEM images show that the FePt/SiO2 nanoparticles exhibit a thick spherical shell. The size and morphology of the MnO shell can be controlled by changing the reaction temperature, the molar ratio of surfactants/Mn(acac)2, and/or the concentration of precursor. The morphology of the MnO shell can be either spherical-like or cubic-like, depending on whether the molar ratio of surfactants/Mn(acac)2 is less than or larger than 2. From XRD measurements, the spherical core/shell nanoparticles exhibit 3D random crystallographic orientation, while the cubic core/shell nanoparticles prefer (200) texture. The magnetic moment of FePt particles can be enhanced by coating with SiO2 and MnO shells. Furthermore, the agglomeration of FePt particles upon the thermal annealing can be significantly inhibited with SiO2 and MnO shells.

Synthesis of Co@Au Core-Shell Nanoparticles in Non-Aqueous Solution and their Characterization

2004 ◽  
Vol 818 ◽  
Author(s):  
Zhihui Ban ◽  
C. J. O'Connor
Keyword(s):  
Aqueous Solution ◽  
Quantum Interference ◽  
Au Nanoparticles ◽  
Magnetic Measurements ◽  
Core Shell ◽  
X Ray Diffraction ◽  
Shell Nanoparticles ◽  
Transmission Electron ◽  
Average Size ◽  
Core Shell Nanoparticles

AbstractA homogeneous non-aqueous solution reactions method has been developed to prepare gold-coated cobalt (Co@Au) nanoparticles. After the sample was washed with 8% HCl, XRD (X-Ray Diffraction), TEM (transmission electron microscopy), and magnetic measurements SQUID (Superconducting Quantum Interference Device) are utilized to characterize the nanocomposites. XRD shows the pattern of sample, which is responding to gold and cobalt, no cobalt oxide was found. TEM results show that the average size of Co@Au nanoparticles is about 10 nm and we can find core-shell structure of the sample. SQUID results show that the particles are ferromagnetic materials at 300K. So the gold- coated cobalt nanoparticles (Co@Au) can be successfully prepared by the homogeneous nonaqueous approach. This kind of core-shell materials is stable in acid condition, which would give many opportunities for bio- application.

Synthesis and Characterization of Carbon-Encapsulated Nickel Nanoparticles from De-Oiled Asphalt

2013 ◽  
Vol 652-654 ◽  
pp. 202-205
Author(s):  
Jun Yu ◽  
Bing She Xu
Keyword(s):  
Nickel Nanoparticles ◽  
Carbon Matrix ◽  
Core Shell ◽  
Ni Nanoparticles ◽  
X Ray Diffraction ◽  
Shell Nanoparticles ◽  
Nickel Powders ◽  
Transmission Electron ◽  
Core Shell Nanoparticles

Carbon-encapsulated Ni nanoparticles with the size of 5 to 30 nm were synthesized from de-oiled asphalt (DOA) by heat-treatment at 1800 °C with nickel powder. The nanoparticles exhibited well-constructed core-shell structures, with Ni cores and graphitic shells. High resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD) examinations confirmed that the carbon-encapsulated Ni nanoparticles were uniformly dispersed in carbon matrix and the Ni nanoparticles were surrounded by several carbon layers with well ordered arrangement. The formation of the core-shell nanoparticles was selectively controlled by adjusting the ratio of de-oiled asphalt to nickel powders. The possible growth model for the carbon-encapsulated Ni nanoparticles was discussed briefly. This result presents a simple and controllable way to synthesize carbon-encapsulated nickel nanoparticles.

scholarly journals Luminescence Nanothermometry Based on Pr3+ : LaF3 Single Core and Pr3+ : LaF3/LaF3 Core/Shell Nanoparticles

2019 ◽  
Vol 2019 ◽  
pp. 1-14 ◽  
Author(s):  
M. S. Pudovkin ◽  
D. A. Koryakovtseva ◽  
E. V. Lukinova ◽  
S. L. Korableva ◽  
R. Sh. Khusnutdinova ◽  
...  
Keyword(s):  
Coherent Scattering ◽  
Core Shell ◽  
Fluorescence Intensity Ratio ◽  
X Ray Diffraction ◽  
Shell Nanoparticles ◽  
X Ray ◽  
The Core ◽  
Transmission Electron ◽  
Means Of Transmission ◽  
Core Shell Nanoparticles

Core Pr3+ : LaF3 (CPr = 1%) plate-like nanoparticles (nanoplates), core/shell Pr3+ : LaF3 (CPr = 1%)/LaF3 nanoplates, core Pr3+ : LaF3 (CPr = 1%) sphere-like nanoparticles (nanospheres), and core/shell Pr3+ : LaF3 (CPr = 1%)/LaF3 nanospheres were synthesized via the coprecipitation method of synthesis. The nanoparticles (NPs) were characterized by means of transmission electron microscopy, X-ray diffraction, and optical spectroscopy. The formation of the shell was proved by detecting the increase in physical sizes, sizes of coherent scattering regions, and luminescence lifetimes of core/shell NPs comparing with single core NPs. The average physical sizes of core nanoplates, core/shell nanoplates, core nanospheres, and core/shell nanospheres were 62.2 ± 0.9, 74.7 ± 1.2, 13.8 ± 0.9 and 22.0 ± 1.2 nm, respectively. The formation of the NP shell led to increasing of effective luminescence lifetime τeff of the 3P0 state of Pr3+ ions for the core nanoplates, core/shell nanoplates, core nanospheres, and core/shell nanospheres the values of τeff were 2.3, 3.6, 3.2, and 4.7 μsec, respectively (at 300 K). The values of absolute sensitivity Sa for fluorescence intensity ratio (FIR) thermometry was 0.01 K−1 at 300 K for all the samples. The FIR sensitivity can be attributed to the fact that 3P1 and 3P0 states share their electronic populations according to the Boltzmann process. The values of Sa for lifetime thermometry for core nanoplates, core/shell nanoplates, core nanospheres, and core/shell nanospheres were (36.4 ± 3.1) · 10−4, (70.7 ± 5.9) · 10−4, (40.7 ± 2.6) · 10−4, and (68.8 ± 2.4) · 10−4 K−1, respectively.

Synthesis and Characterization of Structure Controlled Nano-cobalt Particles

2002 ◽  
Vol 755 ◽  
Author(s):  
Shiqiang Hui ◽  
Mingzhong Wu ◽  
Shihui Ge ◽  
Dajing Yan ◽  
Y.D. Zhang ◽  
...  
Keyword(s):  
Grain Size ◽  
Magnetic Properties ◽  
Silica Coating ◽  
Face Centered Cubic ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Average Grain Size ◽  
Wet Chemical ◽  
Face Centered

ABSTRACTNanostructured cobalt particles with and without a ceramic coating have been synthesized using a wet chemical method. The structure and magnetic properties of synthesized powder were characterized using x-ray diffraction (“XRD”), high-resolution transmission electron microscopy (“HRTEM”), and a Quantum Design (SQUID) magnetometer. The cobalt nanoparticles are of either face-centered cubic (“fcc”) and/or hexagonally close-packed (“hcp”) crystalline structures. The average grain size is ∼14 nm for cobalt (either fcc or hcp) with an amorphous silica coating, and the average grain size is ∼9 nm for hcp cobalt and 26 nm for fcc cobalt without a silica coating. The effect of annealing temperature on grain size and magnetic properties are addressed.

scholarly journals Superparamagnetic Fe/Au Nanoparticles and Their Feasibility for Magnetic Hyperthermia

2021 ◽  
Vol 11 (14) ◽  
pp. 6637
Author(s):  
Mohamed F. Sanad ◽  
Bianca P. Meneses-Brassea ◽  
Dawn S. Blazer ◽  
Shirin Pourmiri ◽  
George C. Hadjipanayis ◽  
...  
Keyword(s):  
Room Temperature ◽  
Hysteresis Loops ◽  
Magnetic Hyperthermia ◽  
Core Shell ◽  
Face Centered Cubic ◽  
Shell Nanoparticles ◽  
Face Centered ◽  
Shell Particles ◽  
Core Shell Nanoparticles ◽  
Alternating Magnetic Fields

Today, magnetic hyperthermia constitutes a complementary way to cancer treatment. This article reports a promising aspect of magnetic hyperthermia addressing superparamagnetic and highly Fe/Au core-shell nanoparticles. Those nanoparticles were prepared using a wet chemical approach at room temperature. We found that the as-synthesized core shells assembled with spherical morphology, including face-centered-cubic Fe cores coated and Au shells. The high-resolution transmission microscope images (HRTEM) revealed the formation of Fe/Au core/shell nanoparticles. The magnetic properties of the samples showed hysteresis loops with coercivity (HC) close to zero, revealing superparamagnetic-like behavior at room temperature. The saturation magnetization (MS) has the value of 165 emu/g for the as-synthesized sample with a Fe:Au ratio of 2:1. We also studied the feasibility of those core-shell particles for magnetic hyperthermia using different frequencies and different applied alternating magnetic fields. The Fe/Au core-shell nanoparticles achieved a specific absorption rate of 50 W/g under applied alternating magnetic field with amplitude 400 Oe and 304 kHz frequency. Based on our findings, the samples can be used as a promising candidate for magnetic hyperthermia for cancer therapy.

Fe3O4@ZrO2 magnetic nanoparticles as a new electrode material for sensitive determination of organophosphorus agents

2015 ◽  
Vol 7 (12) ◽  
pp. 5053-5059 ◽  
Author(s):  
Na-Na Li ◽  
Tian-Fang Kang ◽  
Jing-Jing Zhang ◽  
Li-Ping Lu ◽  
Shui-Yuan Cheng
Keyword(s):  
Photoelectron Spectroscopy ◽  
Magnetic Core ◽  
Core Shell ◽  
X Ray Diffraction ◽  
Shell Nanoparticles ◽  
X Ray ◽  
Transmission Electron ◽  
Sensitive Determination ◽  
Core Shell Nanoparticles

In this study, Fe3O4@ZrO2 magnetic core–shell nanoparticles (NPs) were synthesized and were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS).

Sign in / Sign up

Export Citation Format

Share Document