Experiment Research of Halogen-Free Flame Retardant System for Oil-Extended SEBS

2011 ◽  
Vol 239-242 ◽  
pp. 1317-1321 ◽  
Author(s):  
Xiao Yan Li ◽  
Xia Wang
Keyword(s):  
Thermal Decomposition ◽  
Flame Retardant ◽  
Synergistic Effects ◽  
Decomposition Temperature ◽  
Phosphate Ester ◽  
Thermal Decomposition Temperature ◽  
Experiment Research ◽  
Flame Retarded ◽  
Diphenyl Phosphate ◽  
Halogen Free

By using Bisphenol A bis (diphenyl) phosphate ester (BDP) and a kind of Intumescent Flame Retardant (IFR) as Halogen-free Flame Retarding (HFFR), flame retarded oil-extended hydrogenated styrene-butylenes-styrene (SEBS) were prepared. The samples were systemically characterized by TGA, LOI and FESEM; influence of BDP and IFR for oil-extended SEBS was compared. The results showed that BDP can improve thermal decomposition temperature of SEBS; while the IFR retardant can produce remarkable residual chars to improve SEBS’s decomposition temperature; meanwhile BDP and the IFR retardant can bring synergistic effects in the flame retardancy for the oil-extended SEBS.

Experiment Research of BDP/IFR Halogen Free Flame-Retarding for Oil-Extended SEBS

2012 ◽  
Vol 569 ◽  
pp. 122-127 ◽  
Author(s):  
Yan Chun Li ◽  
Xiao Yan Li ◽  
Xia Wang ◽  
Yuan Hui Han ◽  
Fan Fan ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Decomposition Temperature ◽  
Phosphate Ester ◽  
Experiment Research ◽  
Micro Holes ◽  
Diphenyl Phosphate ◽  
Ul 94 ◽  
Halogen Free ◽  
Delay Decomposition

Bisphenol A bis (diphenyl) phosphate ester (BDP) and a kind of intumescent flame retardant (IFR) were used for flame retarding of oil-extended hydrogenated styrene-butylenes-styrene (O-SEBS). The samples were systemically characterized by TGA, LOI, UL-94, FTIR and FESEM; The results showed that, as a kind of plasticized flame retardant, BDP can improve thermal decomposition temperature and delay decomposition velocity of O-SEBS; while the IFR retardant can promote residual chars with multi-micro holes on the surface of SEBS to inhibit flame; Synergistic flame retarding effects were produced by using BDP and the IFR retardant together, with 20% BDP and 20% IFR, the LOI is 24.5 and flame retardant level is UL-94 classification of V-1, with no dripping. Meanwhile, SEBS-g-MA as compatibility can prompt char residual and thermal property of O-SEBS.

scholarly journals Flame Retardant Properties and Mechanical Properties of Polypropylene with Halogen and Halogen-Free Flame Retardant System

2022 ◽  
Vol 2160 (1) ◽  
pp. 012031
Author(s):  
Xiangdong Zhu ◽  
Yijun Chen ◽  
Chongguang Zang
Keyword(s):  
Mechanical Properties ◽  
Thermal Decomposition ◽  
Flame Retardant ◽  
Oxygen Index ◽  
Decomposition Temperature ◽  
Compound System ◽  
Thermal Decomposition Temperature ◽  
Temperature Range ◽  
Flame Retardant Properties ◽  
Halogen Free

Abstract In this study, to improve the flame retardancy properties of polypropylene, DBDPE/Sb2O3 and DBDPE/HBCD/Sb2O3 flame retardant systems were used for flame retardant PP, and a halogen-free flame retardant PP material was prepared using the one-component intumescent flame retardant PNP1D. Tensile tests, impact tests, ultimate oxygen index, UL94V-0 vertical combustion, thermogravimetric analysis, rheological analysis and scanning electron microscopy were used to study the flame retardant properties and mechanical properties of the flame retardant PP. The test results show that both the ultimate oxygen index of DBDPE/Sb2O3 compounded flame retardant PP and the ultimate oxygen index of PNP1D flame retardant PP are nearly double that of pure PP, passing the UL-94V-0 flame retardant standard. The thermal decomposition temperature range of DBDPE/Sb2O3 compounded system and the thermal decomposition temperature range of PNP1D flame retardant PP both completely cover the thermal decomposition temperature range of both the DBDPE/Sb2O3 compound system and PNP1D flame retardant PP completely covered the thermal decomposition temperature range of pure PP. The tensile and impact strength of the DBDPE/Sb2O3 flame retardant system with 10% SK-80 is 50% higher than that of the DBDPE/Sb2O3 flame retardant system without SK-80. The modified PP with 25% PNP1D is nearly 1 time higher than pure PP in terms of carbon formation and has an ideal flame retardant effect.

The Analysis of Synergistic Effects of Zeolites applied in Intumescent Halogen-free Flame-retardant ABS Composites

2008 ◽  
Vol 47 (6) ◽  
pp. 613-618 ◽  
Author(s):  
Y. Xia ◽  
S. Liu ◽  
X. Wang ◽  
Y. Han ◽  
J. Li ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Synergistic Effects ◽  
Halogen Free

Preparation of Magnesium Carbonate Whisker by Using Magnesite Tailings

2010 ◽  
Vol 654-656 ◽  
pp. 2022-2024
Author(s):  
Nan Wang ◽  
Yue Yuan Li ◽  
Hong Wei Ni
Keyword(s):  
Thermal Decomposition ◽  
Aspect Ratio ◽  
Magnesium Carbonate ◽  
Decomposition Temperature ◽  
Magnesium Salt ◽  
Thermal Decomposition Temperature ◽  
Stirring Intensity

Magnesium carbonate whisker was prepared by thermal decomposition of Mg(HCO3)2 solution that was prepared through hydration and carbonation of light burnt magnesia derived from magnesite tailings. The effects of thermal decomposition conditions on the morphology of magnesium carbonate crystal were investigated. Magnesium carbonate whiskers were successfully prepared when a kind of soluble magnesium salt was added, and magnesium carbonate whiskers with the length of 20 to 60μm and aspect ratio of 10~20 were obtained under the condition of 50 °C thermal decomposition temperature and 200 rpm stirring intensity.

Measurement of Thermal Decomposition Temperature and Rate of Sodium Hydride

2020 ◽  
Author(s):  
Munemichi Kawaguchi
Keyword(s):  
Thermal Decomposition ◽  
Mass Loss ◽  
Heating Temperature ◽  
Fission Products ◽  
Sodium Hydride ◽  
Decomposition Temperature ◽  
Cold Trap ◽  
Thermal Decomposition Temperature ◽  
Heating Rates ◽  
Fundamental Research

Abstract In decommissioning sodium-cooled fast reactors, the operators can be exposed to radiation during dismantling of cold trap equipment (C/T). The C/T is higher dose equipment because the C/T trapped tritium of fission products during the operation to purify the sodium coolant. In this study, thermal decomposition temperature and rate of sodium hydride (NaH) were measured as a fundamental research for development of “thermolysis” process prior to the dismantling. We measured the thermal decomposition temperature and rate using NaH powder (95.3%, Sigma-Aldrich) in alumina pan with ThermoGravimetry-Differential Thermal Analysis (TG-DTA) instrument (STA2500 Regulus, NETZSCH Japan). The heating rates of TG-DTA were set to β = 2.0, 5.0, 10.0 and 20.0 K/min. The DTA showed endothermic reaction and the TG showed two-steps mass-loss over 580K. This first-step mass-loss was consistent with change of chemical composition of the NaH with heating (NaH → Na+1/2H2). The thermal decomposition temperature and rate were obtained from the onset temperature of the mass-loss and the simplified Kissinger plots, respectively. Furthermore, we set to the thermal decomposition temperature of around 590K, and the mass-loss rates were measured. As a result, over 590K, the thermal decomposition occurred actively, and showed good agreement with the estimation curves obtained by the simplified Kissinger plots. The thermal decomposition rate strongly depended on the heating temperature.

scholarly journals Synthesis of a DOPO-triazine additive and its flame-retardant effect in rigid polyurethane foam

e-Polymers ◽  
2019 ◽  
Vol 19 (1) ◽  
pp. 235-243 ◽  
Author(s):  
Lin Liu ◽  
Rui Lv
Keyword(s):  
Flame Retardant ◽  
Polyurethane Foam ◽  
Cell Structure ◽  
Rigid Polyurethane Foam ◽  
Flame Resistance ◽  
Limiting Oxygen Index ◽  
Flame Retarded ◽  
Flame Retardant Properties ◽  
Mechanical Performances ◽  
Halogen Free

AbstractA DOPO (9,10-dihydro-9-oxa-10-phosphaphen-anthrene-10-oxide)-based halogen-free flame retardant (ODOPM-CYC) was synthesized and incorporated in rigid polyurethane foam (RPUF). The structure of ODOPM-CYC was characterized by Fourier transform infrared spectra (FTIR), 1H NMR and 31P NMR. The effects of ODOPM-CYC on the flame resistance, mechanical performances, thermal properties and cell structure of RPUF were also investigated. The results showed that the incorporation of ODOPM-CYC strikingly enhanced flame retardant properties of RPUF. The flame retarded RPUF acquired a limiting oxygen index (LOI) value of 26% and achieved UL-94 V-0 rating with the phosphorus content of 3 wt%. The smoke production rate (SPR) also showed an obvious decrease and total smoke release (TSR) was 39.8% lower than that of neat RPUF. Besides, the results demonstrated that the incorporation of ODOPM-CYC provided RPUF better thermal stability but did not show any obvious influence on its thermal conductivity.

Effect of Co(NO3)2·6H2O thermal decomposition temperature on the nano-Co3O4 product morphology and electrocatalysis of water oxidation

2019 ◽  
Vol 49 (3) ◽  
pp. 251-259 ◽  
Author(s):  
Mohammed Ameen Ahmed Qasem ◽  
Abuzar Khan ◽  
Sagheer A. Onaizi ◽  
Hatim Dafalla Mohamed ◽  
Aasif Helal ◽  
...  
Keyword(s):  
Thermal Decomposition ◽  
Water Oxidation ◽  
Decomposition Temperature ◽  
Thermal Decomposition Temperature ◽  
Product Morphology

scholarly journals The influence of VO2(B) nanobelts on thermal decomposition of ammonium perchlorate

2015 ◽  
Vol 33 (3) ◽  
pp. 560-565 ◽  
Author(s):  
Yifu Zhang ◽  
Xianfang Tan ◽  
Changgong Meng
Keyword(s):  
Thermal Analysis ◽  
Thermal Decomposition ◽  
Ammonium Perchlorate ◽  
Vanadium Dioxide ◽  
Thermo Gravimetric Analysis ◽  
Great Influence ◽  
Decomposition Temperature ◽  
Gravimetric Analysis ◽  
Thermal Decomposition Temperature ◽  
Thermo Gravimetric

Abstract The influence of vanadium dioxide VO2(B) on thermal decomposition of ammonium perchlorate (AP) has not been reported before. In this contribution, the effect of VO2(B) nanobelts on the thermal decomposition of AP was investigated by the Thermo- Gravimetric Analysis and Differential Thermal Analysis (TG/DTA). VO2(B) nanobelts were hydrothermally prepared using peroxovanadium (V) complexes, ethanol and water as starting materials. The thermal decomposition temperatures of AP in the presence of I wt.%, 3 wt.% and 6 wt.% of as-obtained VO2<B) nanobelts were reduced by 39 °C. 62 °C and 74 °C, respectively. The results indicated that VO2(B) nanobelts had a great influence on the thermal decomposition temperature of AP Furthermore, the influence of the corresponding V2Os, which was obtained by thermal treatment of VO2(B) nanobelts, on the thermal decomposition of AP was also investigated. The resufs showed that VO2(B) nanobelts had a greater influence on the thermal decomposition temperature of AP than that of V2Os.

Sign in / Sign up

Export Citation Format

Share Document