Application of Thermoelectric Generation Technology in Building-Integrated Photovoltaics (BIPV)

2011 ◽  
Vol 250-253 ◽  
pp. 2153-2156 ◽  
Author(s):  
Chen Guang Wei ◽  
Zheng Quan Liu ◽  
Xiao Ying Deng
Keyword(s):  
Service Life ◽  
Surface Temperature ◽  
Important Application ◽  
Thermoelectric Generation ◽  
Solar Panels ◽  
Photovoltaic Modules ◽  
Building Integrated Photovoltaics ◽  
Building Integrated Photovoltaic ◽  
Generation Technology ◽  
Tv Model

In recent years, Building Integrated Photovoltaic (BIPV) system has been becoming one of most important application of solar energy. Heat is the key of the BIPV design. If the temperature of photovoltaic modules is too high, it will affect the efficiency of solar cells, the structure performance of the components and service life. This paper present a photoelectric-thermoelectric (PV-TV) model which can collect heat from the solar panels so that to reduce its surface temperature, and then to generate electricity by using of temperature difference technology and devices. The model presented in this paper provides designers a new concept in BIPV design.

Performance Research on Photovoltaic/Thermovoltaic Solar System in Building Integrated Photovoltaic (BIPV)

2013 ◽  
Vol 544 ◽  
pp. 401-404 ◽  
Author(s):  
Chen Guang Wei ◽  
Yi Wang Bao
Keyword(s):  
Solar System ◽  
Electricity Generation ◽  
Solar Panels ◽  
Pv System ◽  
Building Integrated Photovoltaic ◽  
Efficiency Increase ◽  
Heat Collector ◽  
Overall Efficiency ◽  
Performance Research ◽  
Tv Model

A novel hybrid photovoltaic/thermovoltaic solar system (PV/TV) was designed with PV cells combined with heat collector and thermoelectric generator. This PV/TV model can collect heat from the solar panels to reduce its surface temperature, and then to generate electricity by using of temperature difference technology and devices. In this paper, electricity generation performance of PV/TV system between April to October was tested and discussed. The application of this system in photovoltaic building was discussed. The results indicate that overall efficiency of this PV/TV system is higher than that of a pure PV system, and about 5%-15% efficiency increase.

scholarly journals State-of-the-Art Review on the Energy Performance of Semi-Transparent Building Integrated Photovoltaic across a Range of Different Climatic and Environmental Conditions

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3412
Author(s):  
Reza Khalifeeh ◽  
Hameed Alrashidi ◽  
Nazmi Sellami ◽  
Tapas Mallick ◽  
Walid Issa
Keyword(s):  
Urban Areas ◽  
Electrical Power ◽  
Analytical Framework ◽  
Energy Performance ◽  
Energy Losses ◽  
Building Integrated Photovoltaics ◽  
Building Integrated Photovoltaic ◽  
Innovative Solutions ◽  
Building Components ◽  
System Properties

Semi-transparent Building Integrated Photovoltaics provide a fresh approach to the renewable energy sector, combining the potential of energy generation with aesthetically pleasing, multi-functional building components. Employing a range of technologies, they can be integrated into the envelope of the building in different ways, for instance, as a key element of the roofing or façade in urban areas. Energy performance, measured by their ability to produce electrical power, at the same time as delivering thermal and optical efficiencies, is not only impacted by the system properties, but also by a variety of climatic and environmental factors. The analytical framework laid out in this paper can be employed to critically analyse the most efficient solution for a specific location; however, it is not always possible to mitigate energy losses, using commercially available materials. For this reason, a brief overview of new concept devices is provided, outlining the way in which they mitigate energy losses and providing innovative solutions for a sustainable energy future.

Building Integrated Photovoltaic Test Facility*

2001 ◽  
Vol 123 (3) ◽  
pp. 194-199 ◽  
Author(s):  
A. Hunter Fanney ◽  
Brian P. Dougherty
Keyword(s):  
Building Envelope ◽  
Meteorological Station ◽  
Test Facility ◽  
Solar Photovoltaic ◽  
Test Bed ◽  
Manufacturing Costs ◽  
Experimental Performance ◽  
Building Integrated Photovoltaics ◽  
Building Integrated Photovoltaic ◽  
The U.S

The widespread use of building integrated photovoltaics appears likely as a result of the continuing decline in photovoltaic manufacturing costs, the relative ease in which photovoltaics can be incorporated within the building envelope, and the fact that buildings account for over 40% of the U.S. energy consumption. However, designers, architects, installers, and consumers need more information and analysis tools in order to judge the merits of building-integrated solar photovoltaic products. In an effort to add to the knowledge base, the National Institute of Standards and Technology (NIST) has undertaken a multiple-year project to collect high quality experimental performance data. The data will be used to validate computer models for building integrated photovoltaics and, where necessary, to develop algorithms that may be incorporated within these models. This paper describes the facilities that have been constructed to assist in this effort. The facilities include a mobile tracking photovoltaic test facility, a building integrated photovoltaic test bed, an outdoor aging rack, and a meteorological station.

Design Issues and Contribution to Building Energy of Photovoltaic Roof

2011 ◽  
Vol 250-253 ◽  
pp. 3035-3038 ◽  
Author(s):  
Zheng Quan Liu ◽  
Yi Wang Bao
Keyword(s):  
Building Energy ◽  
Energy Output ◽  
Solar Panels ◽  
Winter Solstice ◽  
Related Factors ◽  
Solar Altitude ◽  
Building Integrated Photovoltaics ◽  
Heating And Cooling ◽  
Pv Module ◽  
Pv Modules

Building-integrated photovoltaics (BIPV) is a relatively recent new application of photovoltaic (PV) energy technologies whose energy output is affected by many design-related factors including PV module technologies, installation orientation, tilt and shadow range of solar panels. The shading analysis of a residential house’s PV roof in Beijing was conducted by using building analysis program Autodesk Ecotect 2010. Analysis result shows that there is no shadow on the PV roof from 9a.m to 4p.m in winter solstice when the solar altitude angle reaches minimum, which ensures almost no shading losses for the PV modules over the year. The differences in monthly energy output were compared in the case of different installation tilt of solar panels and PV module technologies. Finally, the contribution to the building energy of the PV roof was discussed. The results show that appropriate design and selection of PV modules can compensate for the energy requirements for building heating and cooling to some extent.

Design of a Mobile Probe to Predict Convection Heat Transfer on Building Integrated Photovoltaic (BIPV) at University of Technology Sydney (UTS)

2015 ◽  
Author(s):  
Jafar Madadnia
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Surface Temperature ◽  
Simple Technique ◽  
Convection Heat Transfer ◽  
Thermal Design ◽  
Uniform Heat Flux ◽  
Convection Heat ◽  
Empirical Correlations ◽  
Building Integrated Photovoltaic

In the absence of a simple technique to predict convection heat transfer on building integrated photovoltaic (BIPV) surfaces, a mobile probe with two thermocouples was designed. Thermal boundary layers on vertical flat surfaces of a photovoltaic (PV) and a metallic plate were traversed. The plate consisted of twelve heaters where heat flux and surface temperature were controlled and measured. Uniform heat flux condition was developed on the heaters to closely simulate non-uniform temperature distribution on vertical PV modules. The two thermocouples on the probe measured local air temperature and contact temperature with the wall surface. Experimental results were presented in the forms of local Nusselt numbers versus Rayleigh numbers “Nu=a * (Ra)b”, and surface temperature versus dimensionless height [Ts -T∞= c*(z/h)d]. The constant values for “a”, “b”, “c” and “d” were determined from the best curve-fitting to the power-law relation. The convection heat transfer predictions from the empirical correlations were found to be in consistent with those predictions made by a number of correlations published in the open literature. A simple technique is then proposed to employ two experimental data from the probe to refine empirical correlations as the operational conditions change. A flexible technique to update correlations is of prime significance requirement in thermal design and operation of BIPV modules. The work is in progress to further extend the correlation to predict the combined radiation and convection on inclined PVs and channels.

Electrical performance results of an energy efficient building with an integrated photovoltaic system

2010 ◽  
Vol 21 (3) ◽  
pp. 2-8 ◽  
Author(s):  
Sosten Ziuku ◽  
Edson L. Meyer
Keyword(s):  
Energy Consumption ◽  
Energy Efficient ◽  
Electrical Power ◽  
Electrical Energy ◽  
Photovoltaic System ◽  
Electrical Performance ◽  
Solar Panels ◽  
Building Integrated Photovoltaics ◽  
The North ◽  
Indoor And Outdoor

A 3.8 kW rooftop photovoltaic generator has been installed on an energy efficient house built at the University of Fort Hare, Alice campus, South Africa. The system, located on the north facing roof, started generating electrical power in February 2009. In addition to providing electrical energy, the photovoltaic panels also act as the building roofing material. An instrumentation and data acquisition system was installed to record the indoor and outdoor ambient temperature, indoor and outdoor relative humidity, wind speed and direction, solar irradiance, electrical energy produced by the solar panels and the household energy consumption. This paper presents the initial results of the electrical performance of the building integrated photovoltaics (BIPV) generator and energy consumption patterns in the energy efficient house.

Applications of Building Integrated Photovoltaic Modules in a Greenhouse of Northern Taiwan

2012 ◽  
Vol 6 (6) ◽  
pp. 721-727 ◽  
Author(s):  
Yi-Chun Kuo ◽  
Che-Ming Chiang ◽  
Po-Cheng Chou ◽  
Hsuan-Jui Chen ◽  
Chia-Yen Lee ◽  
...  
Keyword(s):  
Photovoltaic Modules ◽  
Building Integrated Photovoltaic ◽  
Northern Taiwan

Measured Versus Predicted Performance of Building Integrated Photovoltaics

Solar Energy ◽  
2002 ◽  
Author(s):  
Mark W. Davis ◽  
A. Hunter Fanney ◽  
Brian P. Dougherty
Keyword(s):  
Meteorological Data ◽  
Silicon Film ◽  
Rear Surface ◽  
Predictive Performance ◽  
Performance Data ◽  
Test Bed ◽  
Photovoltaic Panels ◽  
Building Integrated Photovoltaics ◽  
Curve Tracer ◽  
Building Integrated Photovoltaic

The lack of predictive performance tools creates a barrier to the widespread use of building integrated photovoltaic panels. The National Institute of Standards and Technology (NIST) has created a building integrated photovoltaic (BIPV) “test bed” to capture experimental data that can be used to improve and validate previously developed computer simulation tools. Twelve months of performance data have been collected for building integrated photovoltaic panels using four different cell technologies – crystalline, polycrystalline, silicon film, and triple-junction amorphous. Two panels using each cell technology were present, one without any insulation attached to its rear surface and one with insulation having a nominal thermal resistance value of 3.5 m2·K/W attached to its rear surface. The performance data associated with these eight panels, along with meteorological data, were compared to the predictions of a photovoltaic model developed jointly by Maui Solar Software and Sandia National Laboratories (SNL), which is implemented in their IV Curve Tracer software [1]. The evaluation of the predictive performance tools was done in the interest of refining the tools to provide BIPV system designers with a reliable source for economic evaluation and system sizing.

Sign in / Sign up

Export Citation Format

Share Document