Study on Self-Healing Concrete with Pre-Embedded Healing Agent

2011 ◽  
Vol 250-253 ◽  
pp. 405-408 ◽  
Author(s):  
Ming Zhang ◽  
Feng Xing ◽  
Hong Zhi Cui ◽  
Han Lu

Self-healing concrete is a kind of smart concrete, and becoming one of research focus both in material and civil engineering field, in the paper, main self-healing methods concluded and partial technical problems of the self-healing facing, aim to these problems designed a kind of novel self-healing system, and experimental analyzed mechanism of self-healing.

2013 ◽  
Vol 07 (03) ◽  
pp. 1350014 ◽  
Author(s):  
BIQIN DONG ◽  
NINGXU HAN ◽  
MING ZHANG ◽  
XIANFENG WANG ◽  
HONGZHI CUI ◽  
...  

In the study, a novel microcapsule technology based self-healing system for concrete structures has been developed. Through situ-polymerization reaction, the microcapsule is formed by urea formaldehyde resin to pack the epoxy material, which is applied to cementitious composite to achieve self-healing effect. The experimental results revealed that the self-healing efficiency of the composite can be accessed from the recovery of the permeability and strength for the cracked cementitious specimens as the healing agent in the microcapsule acting on the cracks directly. Scanning electronic microscope (SEM/EDX) results show that the epoxy resin is released along with the cracking of the cementitious composite and prevent from cracks continued growth. Further studies show that the self-healing efficiency is affected by the pre-loading of composite, particle size of microcapsule, aging duration of healing agent and so on.


2019 ◽  
Vol 810 ◽  
pp. 119-124
Author(s):  
Wataru Nakao ◽  
Taira Hayakawa ◽  
Tesuro Yanaseko ◽  
Shingo Ozaki

The availability of TiC healing agent has been evaluated in low temperature self-healing behavior of Al2O3 based self-healing ceramics. For this purpose, some technical issues to actualize the advanced fiber-reinforced self-healing ceramics containing TiC based interlayer as healing agent were discussed. Especially, the mechanical matching between the matrix and the interlayer was focused. Moreover, the self-healing behavior of the advanced shFRC containing the optimized TiC based healing agent was investigated. As a result, 30 vol% TiC-70 vol% Al2O3 interlayer was confirmed to be the optimized healing agent in the self-healing ceramics, and the self-healing ceramics was found to enable to attain the perfect healing at 600°C within 10 min. And we succeeded in prototype production of fiber-reinforced self-healing ceramics for low pressure turbine blade.


Author(s):  
Michael Nosonovsky

Wear occurs at most solid surfaces that come in contact with other solid surfaces. While biological surfaces and tissues usually have the ability for self-healing, engineered self-healing materials only started to emerge recently. An example of a smart self-healing material is the materials with embedded microcapsules, which rupture during crack propagation and release a healing agent that repairs the crack. We discuss the conditions under which the self-healing occurs and provide a general theoretical framework and criteria for self-healing using the concept of multiscale organization of entropy and non-equilibrium thermodynamics.


2014 ◽  
Vol 636 ◽  
pp. 73-77 ◽  
Author(s):  
Xin Hua Yuan ◽  
Qiu Su ◽  
Li Yin Han ◽  
Qian Zhang ◽  
Yan Qiu Chen ◽  
...  

Microencapsulated E-51 epoxy resin healing agent and phthalic anhydride latent curing agent were incorporated into E-44 epoxy matrix to prepare self-healing epoxy composites. When cracks were initiated or propagated in the composites, the microcapsules would be damaged and the healing agent released. As a result, the crack plane was healed through curing reaction of the released epoxy latent curing agent. In the paper, PUF/E-51 microcapsules were prepared by in-situ polymerization. The mechanical properties of the epoxy composites filled with the self-healing system were evaluated. The impact strength and self-healing efficiency of the composites are measured using a Charpy Impact Tester. Both the virgin and healed impact strength depends strongly on the concentration of microcapsules added into the epoxy matrix. Fracture of the neat epoxy is brittle, exhibiting a mirror fracture surface. Addition of PUF/E-51 microcapsules decreases the impact strength and induces a change in the fracture plane morphology to hackle markings. In the case of 8.0 wt% microcapsules and 3.0 wt% latent hardener, the self-healing epoxy exhibited 81.5% recovery of its original fracture toughness.


Materials ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 3711
Author(s):  
Mohammad Fahimizadeh ◽  
Ayesha Diane Abeyratne ◽  
Lee Sui Mae ◽  
R. K. Raman Singh ◽  
Pooria Pasbakhsh

Crack formation in concrete is one of the main reasons for concrete degradation. Calcium alginate capsules containing biological self-healing agents for cementitious materials were studied for the self-healing of cement paste and mortars through in vitro characterizations such as healing agent survivability and retention, material stability, and biomineralization, followed by in situ self-healing observation in pre-cracked cement paste and mortar specimens. Our results showed that bacterial spores fully survived the encapsulation process and would not leach out during cement mixing. Encapsulated bacteria precipitated CaCO3 when exposed to water, oxygen, and calcium under alkaline conditions by releasing CO32− ions into the cement environment. Capsule rupture is not required for the initiation of the healing process, but exposure to the right conditions are. After 56 days of wet–dry cycles, the capsules resulted in flexural strength regain as high as 39.6% for the cement mortar and 32.5% for the cement paste specimens. Full crack closure was observed at 28 days for cement mortars with the healing agents. The self-healing system acted as a biological CO32− pump that can keep the bio-agents retained, protected, and active for up to 56 days of wet-dry incubation. This promising self-healing strategy requires further research and optimization.


Soft Matter ◽  
2020 ◽  
Vol 16 (10) ◽  
pp. 2506-2515
Author(s):  
Jojo P. Joseph ◽  
Chirag Miglani ◽  
Ashmeet Singh ◽  
Deepika Gupta ◽  
Asish Pal

Phototriggered self-healing system with the interconversion of autonomic and non-autonomic self-healing pathways through the control of chain collapse in functional single-chain polymers.


Author(s):  
Issam Al Hadid

This chapter introduces the different aviation and airport Information Technology systems. Also, this chapter provides architecture based on the Service Oriented Architecture (SOA) that improves the information accessibility and sharing across the different airport departments, integrating the existing legacy systems with other applications, and improving and maximizing the system’s reliability, adaptability, robustness, and availability using the self-healing agent and virtual Web service connector to guarantee the quality of service (QoS).


2016 ◽  
Vol 45 (2) ◽  
pp. 73-78 ◽  
Author(s):  
Pooneh Kardar

Purpose – The purpose of this work was to prepare a catalyst-free microcapsules as self-healing agent in an automotive clearcoat to improve the scratch resistance of coatings. Design/methodology/approach – In this research, microcapsule with isophorone diisocyanate (IDPI) core and polyurethane shell were prepared and used in self-healing coatings. Microcapsules synthesised were characterised by thermal gravimeter and infrared spectra. The microcapsules were dispersed in an acrylic-melamine clearcoat, and the scratch resistance was evaluated. Findings – The triplex product and the formed polyurethane bonds were confirmed by thermal gravimeter and infrared spectra. In addition, smooth spherical particles with a diameter of 1.5 to 1.7 micronmeters were observed by a scanning electron microscope. The microcapsules dispersed in an acrylic-melamine clearcoat increased the scratch resistance of coatings. Also, the self-healing feature of those coatings was proved. Research limitations/implications – The size of microcapsules can affect its dispersion in the clearcoat and consequently affect the properties of the cured films. Practical implications – The self-healing coatings are interested for many industries such as building and automotive industries. The reported data can be used by the formulators working in the R & D departments. Social implications – Self-healing systems are considered as one of the smart coatings. Therefore, the developing of its knowledge can help to extend its usage to different applications. Originality/value – The application of microcapsules in the coating as healing agents is a great challenge, which has been hardly investigated so far. In the current research, the effect of polyurethane-IDPI microcapsules in an automotive clearcoat as a self-healing coating was investigated.


Sign in / Sign up

Export Citation Format

Share Document