Study on the Influence of PH Value on the Plastic Water-Based Gravure Ink

2011 ◽  
Vol 287-290 ◽  
pp. 1847-1851
Author(s):  
Jia Zhen Sun ◽  
Bei Qing Huang ◽  
Xian Fu Wei ◽  
Yi Chun Zha
Keyword(s):  
High Speed ◽  
Ph Value ◽  
The Other ◽  
Water Based ◽  
Resin Solution ◽  
High Speed Grinding ◽  
Value Of Water ◽  
Influence Of Ph

In order to study the influence of pH value on the plastic water-based gravure ink, the primary ink that is dispersed by high-speed grinding is maxed with good- compatible water-based resin (solution resin) and promoter in proportion. Getting the different pH value of ink samples by two methods, one way is the Amine neutralizers were added in the ink samples, the other is alkaline substances of the ink samples were volatilized by raising temperature. The influence of the pH value to the property of ink was analyzed by testing the pH value, viscosity, stetting, and glossiness of the proofs. The result indicates that changing the pH value of ink will affect the viscosity of ink. The pH value can influent the release of the resin in the ink to the solvent, so the dryness of ink was also influenced. The pH value of water-based ink has a certain influence to the glossiness of the proofs.

Development and Key Technologies of High-Speed Grinding

2012 ◽  
Vol 723 ◽  
pp. 445-449 ◽  
Author(s):  
Yong Yu ◽  
Pei Quan Guo ◽  
Yan Ke Cao ◽  
Xiao Wei Wang ◽  
Pu Zhang
Keyword(s):  
High Speed ◽  
High Efficiency ◽  
The Other ◽  
Belt Grinding ◽  
Spindle System ◽  
Abrasive Belt ◽  
Key Technologies ◽  
High Speed Grinding

The mechanism and characteristic of high speed grinding and the technology and development of high speed grinding were introduced. High efficiency grinding including ultrahigh speed grinding, high efficiency deep grinding, creep deep grinding and abrasive belt grinding was analyzed. The technology about manufacturing the spindle system in super high speed grinding and the other main interrelated technology about grinding were also described.

Research Progress of Advanced Machining Technologies for Engineering Ceramics

2009 ◽  
Vol 69-70 ◽  
pp. 359-363 ◽  
Author(s):  
Xin Li Tian ◽  
Jun Fei Yang ◽  
Chao Liu ◽  
Bao Guo Zhang
Keyword(s):  
Ultrasonic Wave ◽  
High Speed ◽  
The Other ◽  
Research Progress ◽  
Engineering Ceramics ◽  
Elid Grinding ◽  
Thermal Chemistry ◽  
Advanced Technologies ◽  
High Speed Grinding ◽  
Advanced Machining

Based on the comprehensive summary of latest research achievements of Laser and EDM technologies in home and abroad, the other advanced machining technologies is summarized briefly, such as Ultrasonic Wave, Microwave machining techniques and their composite machining technologies, as well as High-speed (Super High-speed) Grinding, ELID Grinding and Interface Thermal Chemistry Reaction Aided Machining technologies developed on the basis of traditional grinding technology. At last, it is forecasted that the necessary direction of advanced technologies used for ceramics is combinatorial machining technologies of two or more kinds of advanced technologies.

Preparation of the Plastic Water-Based Gravure Primary Ink with High Pigment

2011 ◽  
Vol 380 ◽  
pp. 15-19 ◽  
Author(s):  
Jia Zhen Sun ◽  
Xian Fu Wei ◽  
Pei Qing Huang ◽  
Qing Li Liu
Keyword(s):  
Environmental Pollution ◽  
Size Distribution ◽  
Organic Solvents ◽  
High Speed ◽  
Quality Requirements ◽  
Volatile Organic ◽  
Water Based ◽  
Binder Ratio ◽  
Color Density ◽  
High Speed Grinding

The water-based gravure ink contains no volatile organic solvents and makes little environmental pollution, so it will be used widely as one promising environment-protecting ink. The dryness of water-based ink is always one hard point, because the printing carrier plastic hasn’t absorbability. To improve the dryness speed, the use of shallow version reducing the transfer is a common way. In order to reach the quality requirements of the graver press, the ink with high pigment is necessary. In this text getting printable ink samples, the primary ink that is dispersed by high-speed grinding is maxed with good- compatible water-based resin, co-solvent and auxiliary in proportion. Then getting the proof of the ink using IGT F1, the viscosity, size distribution, color density were tested . The influence of pigment/binder ratio to the viscosity, dispersibility and adherence of the ink were discussed. The result indicates that with the pigment/binder ratio promoting, the viscosity of the primary ink is decreasing. The dispersibility of primary ink is influenced by the pigment/binder ratio, when the pigment/binder is 2:1 ,the size of ink is the smallest. The pigment/binder ratio in primary ink has a certain influence to the adherence and the apparent performances of the ink. And the color density and the gloss of the proof are also influenced.

Influence of pH Value on the Performance of Composite Films Prepared from Chromium Residue by Hydrothermal Method

2013 ◽  
Vol 28 (4) ◽  
pp. 387-392
Author(s):  
Tong SUN ◽  
Lian-Li LIU ◽  
Shu-Ying XU ◽  
Xiao-Lin PENG ◽  
Hai-Long YANG
Keyword(s):  
Hydrothermal Method ◽  
Ph Value ◽  
Composite Films ◽  
Influence Of Ph

Simulation and Experiment on the Residual Stress in Super-High Speed Grinding

2010 ◽  
Vol 135 ◽  
pp. 238-242
Author(s):  
Yue Ming Liu ◽  
Ya Dong Gong ◽  
Wei Ding ◽  
Ting Chao Han
Keyword(s):  
Residual Stress ◽  
High Speed ◽  
Element Model ◽  
Residual Stress Distribution ◽  
X Ray Diffraction ◽  
Machined Surface ◽  
X Ray ◽  
High Speed Grinding ◽  
Simulation And Experiment ◽  
Cylindrical Workpiece

In this paper, effective finite element model have been developed to simulation the plastic deformation cutting in the process for a single particle via the software of ABAQUS, observing the residual stress distribution in the machined surface, the experiment of grinding cylindrical workpiece has been brought in the test of super-high speed grinding, researching the residual stress under the machined surface by the method of X-ray diffraction, which can explore the different stresses from different super-high speed in actual, and help to analyze the means of reducing the residual stresses in theory.

scholarly journals Leader-chasing behavior in negative artificial triggered lightning flashes

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Fukun Wang ◽  
Jianguo Wang ◽  
Li Cai ◽  
Rui Su ◽  
Wenhan Ding ◽  
...  
Keyword(s):  
High Speed ◽  
The Other ◽  
Lightning Flash ◽  
High Speed Camera ◽  
Return Stroke ◽  
Catching Up ◽  
Special Cases ◽  
Triggered Lightning

AbstractTwo special cases of dart leader propagation were observed by the high-speed camera in the leader/return stroke sequences of a classical triggered lightning flash and an altitude-triggered lightning flash, respectively. Different from most of the subsequent return strokes preceded by only one leader, the return stroke in each case was preceded by two leaders occurring successively and competing in the same channel, which herein is named leader-chasing behavior. In one case, the polarity of the latter leader was opposite to that of the former leader and these two combined together to form a new leader, which shared the same polarity with the former leader. In the other case, the latter leader shared the same polarity with the former leader and disappeared after catching up with the former leader. The propagation of the former leader in this case seems not to be significantly influenced by the existence of the latter leader.

Explosion accident analysis of ultra-high-speed grinding wheel

2020 ◽  
pp. 105209
Author(s):  
Yao Wu ◽  
Pan Lu ◽  
Feihong Lin ◽  
Wencheng Bao ◽  
Meina Qu ◽  
...  
Keyword(s):  
High Speed ◽  
Grinding Wheel ◽  
Accident Analysis ◽  
Ultra High Speed ◽  
High Speed Grinding

Removal Mechanism of Titanium Alloy Ti6Al4V Based on Single-Grain High Speed Grinding Test

2011 ◽  
Vol 487 ◽  
pp. 39-43 ◽  
Author(s):  
L. Tian ◽  
Yu Can Fu ◽  
W.F. Ding ◽  
Jiu Hua Xu ◽  
H.H. Su
Keyword(s):  
Titanium Alloy ◽  
High Speed ◽  
Chip Thickness ◽  
Wheel Speed ◽  
High Speed Grinding ◽  
Tc4 Alloy ◽  
Grinding Mechanism ◽  
Single Grain ◽  
On Chip ◽  
Titanium Alloy Ti6al4v

Single-grain grinding test plays an important part in studying the high speed grinding mechanism of materials. In this paper, a new method and experiment system for high speed grinding test with single CBN grain are presented. In order to study the high speed grinding mechanism of TC4 alloy, the chips and grooves were obtained under different wheel speed and corresponding maximum undeformed chip thickness. Results showed that the effects of wheel speed and chip thickness on chip formation become obvious. The chips were characterized by crack and segment band feature like the cutting segmented chips of titanium alloy Ti6Al4V.

Sign in / Sign up

Export Citation Format

Share Document