Alkali Diagenesis and its Genesis of Xujiahe Sandstone Reservoir in South-Central Sichuan Basin

2011 ◽  
Vol 347-353 ◽  
pp. 1701-1706
Author(s):  
Sheng Bin Zhang ◽  
Zhen Liu ◽  
Hong Jun Liu ◽  
Ya Hui Song ◽  
Xin Min Li ◽  
...  
Keyword(s):  
Sichuan Basin ◽  
X Ray Diffraction ◽  
X Ray ◽  
Xujiahe Formation ◽  
South Central ◽  
Quartz Dissolution ◽  
Sandstone Reservoir ◽  
Central Sichuan Basin ◽  
Diagenetic Environment

Alkali diagenesis has been discovered firstly in Xujiahe formation in Sichuan basin. Alkali diagenesis is characterized by quartz dissolution pore. Based on thin section identification, scanning electron microscope and X-ray diffraction analysis, and considering the geological background, the characteristics and formation mechanism of alkali diagenesis in Xujiahe formation are studied thoroughly. The results indicate that the sandstone reservoir in Xujiahe formation has experienced a strong diagenesis and entered the stage of late diagenetic B. Diagenetic environment experienced a transition from acidity to alkalinity. Secondary pores produced by quartz dissolution contribute for the better quality of Xu_2 reservoir.

scholarly journals X-ray diffraction analysis of kaolin M1 and M2 via the Williamson–Hall and Warren–Averbach methods

2021 ◽  
pp. 174751982098472
Author(s):  
Lalmi Khier ◽  
Lakel Abdelghani ◽  
Belahssen Okba ◽  
Djamel Maouche ◽  
Lakel Said
Keyword(s):  
Grain Size ◽  
High Temperature ◽  
Low Temperature ◽  
Diffraction Analysis ◽  
Mechanical Resistance ◽  
X Ray Diffraction ◽  
Integral Breadth ◽  
X Ray ◽  
Mullite Phase

Kaolin M1 and M2 studied by X-ray diffraction focus on the mullite phase, which is the main phase present in both products. The Williamson–Hall and Warren–Averbach methods for determining the crystallite size and microstrains of integral breadth β are calculated by the FullProf program. The integral breadth ( β) is a mixture resulting from the microstrains and size effect, so this should be taken into account during the calculation. The Williamson–Hall chart determines whether the sample is affected by grain size or microstrain. It appears very clearly that the principal phase of the various sintered kaolins, mullite, is free from internal microstrains. It is the case of the mixtures fritted at low temperature (1200 °C) during 1 h and also the case of the mixtures of the type chamotte cooks with 1350 °C during very long times (several weeks). This result is very significant as it gives an element of explanation to a very significant quality of mullite: its mechanical resistance during uses at high temperature remains.

Study of the quality of GaAs thin film on Si substrate by X-ray diffraction method

1990 ◽  
Vol 7 (7) ◽  
pp. 308-311
Author(s):  
Li Chaorong ◽  
Mai Zhenhong ◽  
Cui Shufan ◽  
Zhou Junming ◽  
Yutian Wang
Keyword(s):  
Thin Film ◽  
Diffraction Method ◽  
X Ray Diffraction ◽  
Si Substrate ◽  
X Ray

scholarly journals High temperature structural study of decagonal Al-Cu-Rh quasicrystal.

2014 ◽  
Vol 70 (a1) ◽  
pp. C94-C94
Author(s):  
Pawel Kuczera ◽  
Walter Steurer
Keyword(s):  
Structural Changes ◽  
Configurational Entropy ◽  
Lattice Vibrations ◽  
X Ray Diffraction ◽  
Stabilization Mechanism ◽  
X Ray ◽  
Comparative Structure ◽  
The Stability

The structure of d(ecagonal)-Al-Cu-Rh has been studied as a function of temperature by in-situ single-crystal X-ray diffraction in order to contribute to the discussion on energy or entropy stabilization of quasicrystals (QC) [1]. The experiments were performed at 293 K, 1223 K, 1153 K, 1083 K, and 1013 K. A common subset of 1460 unique reflections was used for the comparative structure refinements at each temperature. The results obtained for the HT structure refinements of d-Al-Cu-Rh QC seem to contradict a pure phasonic-entropy-based stabilization mechanism [2] for this QC. The trends observed for the ln func(I(T1 )/I(T2 )) vs.|k⊥ |^2 plots indicate that the best on-average quasiperiodic order exists between 1083 K and 1153 K, however, what that actually means is unclear. It could indicate towards a small phasonic contribution to entropy, but such contribution is not seen in the structure refinements. A rough estimation of the hypothetic phason instability temperature shows that it would be kinetically inaccessible and thus the phase transition to a 12 Å low T structure (at ~800 K) is most likely not phason-driven. Except for the obvious increase in the amplitude of the thermal motion, no other significant structural changes, in particular no sources of additional phason-related configurational entropy, were found. All structures are refined to very similar R-values, which proves that the quality of the refinement at each temperature is the same. This suggests, that concerning the stability factors, some QCs could be similar to other HT complex intermetallic phases. The experimental results clearly show that at least the ~4 Å structure of d-Al-Cu-Rh is a HT phase therefore entropy plays an important role in its stabilisation mechanism lowering the free energy. However, the main source of this entropy is probably not related to phason flips, but rather to lattice vibrations, occupational disorder unrelated to phason flips like split positions along the periodic axis.

Crystalline and Electrical Properties of Ferroelectric Silver Niobate-tantalate thin Films

2000 ◽  
Vol 655 ◽  
Author(s):  
Jung-Hyuk Koh ◽  
S.I. Khartsev ◽  
Alex Grishin ◽  
Vladimir Petrovsky
Keyword(s):  
Temperature Stability ◽  
Frequency Dispersion ◽  
Processing Temperature ◽  
High Temperature Stability ◽  
X Ray Diffraction ◽  
Ferroelectric State ◽  
X Ray ◽  
Ferroelectric Hysteresis ◽  
First Time

AbstractFor the first time AgTa0.38Nb0.62O3 (ATN) films have been grown on the La0.7Sr0.3CoO3 (LSCO)/LaAlO3 single crystal as well as onto Pt80Ir20 (PtIr) polycrystalline substrate. Comprehensive X-ray diffraction analyses reveal epitaxial quality of ATN and LSCO films on the LaAlO3(001) substrate, while ATN/PtIr films have been found to be (001) preferentially oriented. Dielectric spectroscopy performed for ATN films and bulk ceramics in a wide temperature range 77 to 420 K shows the structural monoclinic M1-to-monoclinic M2 phase transition occurs in films at the temperature 60 °C lower than in ceramics. The tracing of the ferroelectric hysteresis P-E loops indicates the ferroelectric state in ATN films at temperatures below 125 K and yields remnant polarization of 0.4 μC/cm2 @ 77 K. Weak frequency dispersion, high temperature stability of dielectric properties as well as low processing temperature of 550 °C make ATN films to be attractive for various applications.

Characterization of Natural and Synthesized FeTiO3 Crystals With RBS/PIXE/XRD

1997 ◽  
Vol 07 (03n04) ◽  
pp. 265-275
Author(s):  
R. Q. Zhang ◽  
S. Yamamoto ◽  
Z. N. Dai ◽  
K. Narumi ◽  
A. Miyashita ◽  
...  
Keyword(s):  
Single Crystals ◽  
Ion Beam ◽  
Pressure Control ◽  
Floating Zone ◽  
X Ray Diffraction ◽  
X Ray ◽  
Beam Analysis ◽  
Ppm Level

Natural FeTiO 3 (illuminate) and synthesized FeTiO 3, single crystals were characterized by Rutherford backscattering spectroscopy combined with channeling technique and particle-induced x-ray emission (RBS-C and PIXE). The results obtained by the ion beam analysis were supplemented by the x-ray diffraction analysis to identify the crystallographic phase. Oriented single crystals of synthesized FeTiO 3 were grown under the pressure control of CO 2 and H 2 mixture gas using a single-crystal floating zone technique. The crystal quality of synthesized FeTiO 3 single crystals could be improved by the thermal treatment but the exact pressure control is needed to avoid the precipitation of Fe 2 O 3 even during the annealing procedure. Natural FeTiO 3 contains several kinds of impurities such as Mn , Mg , Na and Si . The synthesized samples contain Al , Si and Na which are around 100 ppm level as impurities. The PBS-C results of the natural sample imply that Mn impurities occupy the Fe sublattice in FeTiO 3 or in mixed phase between ilmenite and hematite.

Development of Ternary Concrete Utilizing Agricultural Waste Material

2022 ◽  
Author(s):  
Sunita Kumari ◽  
Dhirendra Singhal ◽  
Rinku Walia ◽  
Ajay Rathee
Keyword(s):  
Rice Husk ◽  
Rice Husk Ash ◽  
Agricultural Waste ◽  
Xrd Analysis ◽  
Sem Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Concrete Mix ◽  
Maize Cob

Abstract The present project proposes to utilize rice husk and maize cob husk ash in the cement to mitigate the adverse impact of cement on environment and to enhance the disposal of waste in a sustainable manner. Ternary concrete / MR concrete was prepared by using rise husk and maize cob ash with cement. For the present project, five concrete mixes MR-0 (Control mix), MR-1 (Rice husk ash 10% and MR-2.5%), MR-2 (Rice husk ash 10% and MR-5%), MR-3 (Rice husk ash 10% and MR-2.5%), MR-4 (Rice husk ash 10% and MR-2.5%) were prepared. M35 concrete mix was designed as per IS 10262:2009 for low slump values 0-25mm. The purpose is to find the optimum replacement level of cement in M35 grade ternary concrete for I – Shaped paver blocks.In order to study the effects of these additions, micro-structural and structural properties test of concretes have been conducted. The crystalline properties of control mix and modified concrete are analyzed by Fourier Transform Infrared Spectroscope (FTIR), Scanning Electron Microscopy (SEM), and X-Ray Diffraction (XRD). The results indicated that 10% Rice husk ash and 5% maize cob ash replaced with cement produce a desirable quality of ternary concrete mix having good compressive strength. The results of SEM analysis indicated that the morphology of both concrete were different, showing porous structure at 7 days age and become unsymmetrical with the addition of ashes. After 28 day age, the control mix contained more quantity of ettringite and became denser than ternary concrete. XRD analysis revealed the presence of portlandite in large quantity in controlled mix concrete while MR concrete had the partially hydrated particle of alite.

Characterization of WC-Co Coatings Using HP/HVOF Process

1996 ◽  
Author(s):  
S.Y. Hwang ◽  
B.G. Seong ◽  
M.C. Kim
Keyword(s):  
Wear Resistance ◽  
X Ray Diffraction ◽  
High Carbon ◽  
Properties Of Coatings ◽  
X Ray ◽  
Hvof Process ◽  
Number Of Passes ◽  
Oxygen Fuel

Abstract To maintain surface roughness of process rolls in cold rolling steel plants, WC-Co coatings have been known to be effective ones. In this study, a high pressure/high velocity oxygen fuel (HP/HVOF) process was used to obtain WC-Co coatings. To get the best quality of coatings, WC-Co coatings are sprayed with numerous powders made by various processes. These powders include agglomerated sintered powders, fused-crushed powders, extra high carbon WC-Co powders and (W2C, WC)-Co powders. After spraying, properties of coatings such as hardness, wear resistance. X-ray diffraction, and microstructures were analyzed. For coatings produced by agglomerated-sintered powders, hardness of the coating increased as power levels and the number of passes were increased. In case of the coatings produced by fused-crushed powders, a very low deposition rate was obtained due to a low flowablity of the powders. In addition, the WC-Co coatings sprayed with extra carbon content of WC-Co did not show improved hardness and wear resistance. Also, some decomposition of WC was observed in the coating. Finally, the coatings produced by (W2C, WC)-Co powders produced higher hardness and lower wear resistance coating.

scholarly journals Crystallization, optimization and preliminary X-ray characterization of a metal-dependent PI-PLC fromStreptomyces antibioticus

2012 ◽  
Vol 68 (11) ◽  
pp. 1378-1386 ◽  
Author(s):  
Michael R. Jackson ◽  
Thomas L. Selby
Keyword(s):  
X Ray Diffraction ◽  
Hanging Drop ◽  
Orthorhombic Space Group ◽  
X Ray ◽  
Streptomyces Antibioticus ◽  
Cell Parameters ◽  
Heavy Atoms ◽  
Hanging Drop Method

A recombinant metal-dependent phosphatidylinositol-specific phospholipase C (PI-PLC) fromStreptomyces antibioticushas been crystallized by the hanging-drop method with and without heavy metals. The native crystals belonged to the orthorhombic space groupP222, with unit-cell parametersa= 41.26,b= 51.86,c = 154.78 Å. The X-ray diffraction results showed significant differences in the crystal quality of samples soaked with heavy atoms. Additionally, drop pinning, which increases the surface area of the drops, was also used to improve crystal growth and quality. The combination of heavy-metal soaks and drop pinning was found to be critical for producing high-quality crystals that diffracted to 1.23 Å resolution.

scholarly journals Исследование этапов превращения кремния в карбид кремния в процессе атомного замещения методами полного внешнего отражения рентгеновских лучей и рентгеновской дифрактомерии

2022 ◽  
Vol 64 (3) ◽  
pp. 326
Author(s):  
С.А. Кукушкин ◽  
А.В. Осипов ◽  
Е.В. Осипова ◽  
В.М. Стожаров
Keyword(s):  
Structural Quality ◽  
Total External Reflection ◽  
X Rays ◽  
Reflection Method ◽  
X Ray Diffraction ◽  
Modified Technique ◽  
Substitution Method ◽  
X Ray ◽  
Sic Films

X-ray diffraction and total external reflection of X-rays (X-ray reflectometry) methods were used to study the successive stages of synthesis of epitaxial SiC films on Si (100) X-ray diffraction and total external X-ray reflection (XRD) methods were used to study successive stages of synthesis of epitaxial SiC films on Si (100) surfaces, (110) and (111) surfaces by the atom substitution method. The data on the transformation evolution of (100) surfaces were studied, (110) and (111) Si, into SiC surfaces. A comparative analysis of the X-ray structural quality of the SiC layers grown on Si by the atom substitution method with the quality of SiC layers grown by Advanced Epi by the standard CVD method. A modified technique for the total outer X-ray reflection method, based on measurements of the intensity of the reflected X-rays using a special parabolic mirror. It is shown that the method of total external reflection method makes it possible to obtain important information about the degree of surface roughness of SiC layers, the evolution of their crystal structure and plasmon energy in the process of Si to SiC conversion.

scholarly journals SPECTROSCOPIC METHODS TO DETERMINATION OF GEOTHITE IN KAOLINITE

2020 ◽  
Vol 17 (35) ◽  
pp. 303-314
Author(s):  
Marcelo Kehl; ; ; ; DE SOUZA ◽  
Marcos Antônio KLUNK ◽  
Soyane Juceli Siqueira XAVIER ◽  
Mohuli DAS ◽  
Sudipta DASGUPTA
Keyword(s):  
Spectroscopic Methods ◽  
Industrial Minerals ◽  
X Ray Diffraction ◽  
Simple Shape ◽  
X Ray ◽  
Spectroscopic Monitoring ◽  
Partial Release ◽  
Primary Minerals

One of the main contaminants of kaolinite, the iron, directly impacts quality in its commercial value. The spectroscopic monitoring, measured the depth of absorption of kaolinite, is compared with the literature in order to identify possible contaminants. The occurrence of kaolinite is due to the formation of primary minerals after the partial release of cations and silicon. This clay-mineral has a simple shape, with variable crystallographic imperfections, especially in the presence of iron, which replaces aluminum in the mineral chain, causing various structural disorganizations. The extraction of industrial minerals combined with geological studies, allows the development of new sources of energy, such as clay minerals, in particular kaolinite. Depending on the origin of the kaolinites, the presence of iron oxides in its structure, Fe2O3 and FeO(OH), are common. By comparing the results of spectroscopy (X-ray fluorescence, X-ray diffraction, RAMAN) and imaging using SEM-EDS, it was possible to identify kaolinite, with a higher determination coefficient, when the proportion of kaolinite reaches 60% or more in the mix. Kaolinite can be identified and quantified with a high correlation in the mixture from the sample absorption. Thus, the method has great potential to assist in quantifying and, consequently, in discriminating the quality of kaolinite.

Sign in / Sign up

Export Citation Format

Share Document