Petrogenesis of Neoproterozoic Ultramafic Rocks, Wadi Ibib–Wadi Shani, South Eastern Desert, Egypt: Constraints from Whole Rock and Mineral Chemistry

This contribution deals with new geology, petrography, and bulk-rock/mineral chemistry of the poorly studied ultramafics of Wadi Ibib–Wadi Shani (WI–WS) district, South Eastern Desert, Egypt. These ultramafics are dismembered ophiolitic rocks that can be subdivided into serpentinites and serpentinized peridotites. Primary minerals such as olivine and pyroxene are absent in serpentinites, but relics of them occur in serpentinized peridotites. Pseudomorph after olivine is indicated by common hourglass textures with less mesh, whilst schistose bastites reflect a pyroxene pseudomorph. Chromite can be subdivided into Cr-spinel and Al-spinel. Cr-spinel ranges from chromite to magnesochromite in composition, whereas Al-spinel belongs to the spinel field. Cr-spinel includes YCr (Cr/(Cr+Al+Fe+3), YAl (Al/(Al+Cr+Fe+3), and YFe+3 (Fe+3/(Fe+3+Al+Cr), similar to forearc peridotite, whilst Al-spinel is more similar to abyssal peridotite, and may be formed during inanition of subduction processes in proto forearc environments. The main secondary minerals are tremolite, talc, and chlorite—which is subdivided into pycnochlorite and diabantite—and their temperature ranges from 174 to 224 °C. The examined rocks had undergone high partial melting degrees (>25%), as indicated by the Cr# of their unaltered cores (Cr-spinel, >0.6), whole rocks (Al2O3, SiO2, CaO, and MgO), trace and REEs, depleted Na2O, Al2O3, and Cr2O3 of clinopyroxene, and high forsterite content ((Fo = 100 Mg/Mg + Fe), av. 95.23 mol%), consistent with forearc settings.

Rock weathering controls the potential for soil carbon storage at a continental scale

As rock-derived primary minerals weather to form soil, they create reactive, poorly crystalline minerals that bind and store organic carbon. By implication, the abundance of primary minerals in soil might influence the abundance of poorly crystalline minerals, and hence soil organic carbon storage. However, the link between primary mineral weathering, poorly crystalline minerals, and soil carbon has not been fully tested, particularly at large spatial scales. To close this knowledge gap, we designed a model that links primary mineral weathering rates to the geographic distribution of poorly crystalline minerals across the USA, and then used this model to evaluate the effect of rock weathering on soil organic carbon. We found that poorly crystalline minerals are most abundant and most strongly correlated with organic carbon in geographically limited zones that sustain enhanced weathering rates, where humid climate and abundant primary minerals co-occur. This finding confirms that rock weathering alters soil mineralogy to enhance soil organic carbon storage at continental scales, but also indicates that the influence of active weathering on soil carbon storage is limited by low weathering rates across vast areas.

The Influence of Hyper-Alkaline Leachate on a Generic Host Rock Composition for a Nuclear Waste Repository: Experimental Assessment and Modelling of Novel Variable Porosity and Surface Area

Deep geological disposal is the preferred solution for long-term storage of radioactive waste in many countries. In a deep repository, cementitious materials are widely used in the structure and buffer/backfill of the repository for the stabilisation of the hazardous materials. The cement acts as a physical barrier and also contributes chemically to waste containment by buffering the groundwater to a high pH, limiting the solubility of many radionuclides. This paper describes an experimental and modelling study which evaluates the geochemical interaction between young cement leachate (YCL, pH = 13) and a generic hard rock (in this case Hollington sandstone, representing a ‘hard’ host rock) during permeation with the leachate, as it drives mineralogical changes in the system. One-dimensional reactive transport was modelled using a mixing cell approach within the PHREEQC geochemical code to identify the essential parameters and understand and scale up the effect of variations in these parameters on the observed geochemical processes. This study also focused on the effects of variable porosity, reactive surface area and pore volume on improving the modelling of rock alteration in the system compared to conventional models that assume constant values for these properties. The numerical results showed that the interaction between the injected hyper-alkaline leachate and the sandstone sample results in a series of mineralogical reactions. The main processes were the dissolution of quartz, kaolinite and k-feldspar which was coupled with the precipitation of calcium silicate hydrate gel and tobermorite-14A (C–S–H), prehnite (hydrated silicate), saponite-Mg (smectite clay) and mesolite (Na–Ca zeolite). The simulation showed that the overall porosity of the system increased as primary minerals dissolve and no stable precipitation of the secondary C–S–H /C–A–S–H phases was predicted. The variable porosity scenario provides a better fitting to experimental data and more detailed trends of chemistry change within the column. The time and the number of moles of precipitated secondary phases were also improved which was related to greater exposure surface area of the minerals in the sandstone sample to the YCL. Article Highlights The drop in calcium, aluminium and silicate concentrations is mainly due to the formation of calcium silicate hydrate and zeolite minerals as secondary phases. The simulation showed that the overall porosity of the system increased as primary minerals dissolve and no stable precipitation of the secondary C–S–H /C–A–S–H phases was predicted. The dissolution of primary minerals and the precipitation of secondary C–S–H phases had a minimal effect on the pH values, and this was controlled mainly by the initial fluid chemistry. The variable porosity scenario provides a better fitting to experimental data and more detailed trends of chemistry change within the column.

Archean Itabirites From Ovan, NE-Gabon: Petrography, Mineralogy And Elemental Mapping

The Archean greenstone belt called Bélinga Group was highlighted in NE-Gabon around 1960. It consists of many petrographic types such as itabirites (BIFs), ultrabasites, and amphibolites. Recent geophysical studies revealed the presence of BIFs and associated rocks at Ovan, which were linked to the Bélinga Group according to similar magnetic and some petrographic characteristics. Unfortunately, data on itabirites in respect with petrography, mineralogy and geochemistry are rare. This note aims at contributing to petrography, mineralogy and elemental mapping of Ovan itabirites on the one hand, and giving strong proofs that they belong to the Bélinga Group on the other. Field investigations bring samples from six sites around Ovan. Selected itabirites samples have been studied in petrography, mineralogy (XRD) and elemental mapping (SEM). Two (2) itabirites lithofacies are recognized: the well-banded and the massive itabirites. Mineral assemblages show principally quartz, magnetite, hematite and goethite. SEM images show euhedral to sub-euhedral grains of quartz and Fe-oxides of two types: the biggest (Fe1), seen as primary minerals within Fe-rich bands and the smallest (Fe2), as secondary minerals disseminated in the siliceous levels. Elemental mapping clearly reveals alternating Fe- and Si-rich bands with Fe-rich bands predominance. Finally, the itabirites around Ovan are sedimentary rocks essentially formed by chemical precipitation and belonging to the Bélinga Group.

U–Pb ages of detrital zircons in Cretaceous–Paleogene/Neogene kaolins within Eastern Dahomey and Niger Delta Basins (Nigeria) as provenance indicators

Detrital zircon grains within four (4) deposits including two (2) Cretaceous and two (2) Paleogene/Neogene kaolins in Nigeria were analysed using U–Pb LA-SFICP-MS to determine their provenance. The zircon textures were dominated by xenocrystic cores and oscillatory zoning in the Cretaceous and Paleogene/Neogene kaolins, respectively. The Th/U ratios obtained for the detrital zircon grains within the kaolins were predominantly within known values for rocks with magmatic origin. The age populations obtained for the detrital zircon grains were dominated by values from 529 to 978 Ma within the Neoproterozoic, followed by values from 1754 to 2497 Ma of the Paleoproterozoic. Detrital zircon ages obtained between 553.2 ± 6.2 and 583.5 ± 2.0 Ma represent part of the minimum provenance ages for the primary minerals that were kaolinised. The Cretaceous–Paleogene/Neogene kaolins were derived from parent rocks of Eburnean and Pan African ages within the Western and Northern Nigeria Basements.

Primary Minerals and Age of The Hydrothermal Quartz Veins Containing U-Mo-(Pb, Bi, Te) Mineralization in the Majerská Valley near Čučma (Gemeric Unit, Spišsko-Gemerské Rudohorie Mts., Slovak Republic)

An occurrence of vein U-Mo mineralization is located in the Majerská valley near Čučma, about 7 km to the NNE of the district town of Rožňava (Eastern Slovakia). Mineralization is hosted in the acidic metapyroclastics of the Silurian Bystrý Potok Fm. (Gemeric Unit), and originated in the following stages: (I.) quartz I, fluorapatite I; (II.) quartz II, fluorapatite II, zircon, rutile chlorite, tourmaline; (III.) uraninite, molybdenite, U-Ti oxides; (IV.) pyrite I, ullmannite, gersdorffite, cobaltite; (Va.) galena, bismuth, tetradymite, joséite A and B, Bi3(TeS)2 mineral phase, (BiPb)(TeS) mineral phase, ikunolite; (Vb.) minerals of the kobellite–tintinaite series, cosalite; (VI.) pyrite II; (VII.) titanite, chlorite; and (VIII.) supergene mineral phases. The chemical in-situ electron-microprobe U-Pb dating of uraninite from a studied vein yielded an average age of around 265 Ma, corresponding to the Guadalupian Epoch of Permian; the obtained data corresponds with the age of Gemeric S-type granites. The age correlation of uraninite with the Gemeric S-type granites and the spatial connection of the studied mineralization with the Čučma granite allows us to assume that it is a Hercynian, granite-related (perigranitic) mineralization.

Mineralogy of Phoscorites of the Arbarastakh Complex (Republic of Sakha, Yakutia, Russia)

The Arbarastakh ultramafic carbonatite complex is located in the southwestern part of the Siberian Craton and contains ore-bearing carbonatites and phoscorites with Zr-Nb-REE mineralization. Based on the modal composition, textural features, and chemical compositions of minerals, the phoscorites from Arbarastakh can be subdivided into two groups: FOS 1 and FOS 2. FOS 1 contains the primary minerals olivine, magnetite with isomorphic Ti impurities, phlogopite replaced by tetraferriphlogopite along the rims, and apatite poorly enriched in REE. Baddeleyite predominates among the accessory minerals in FOS 1. Zirconolite enriched with REE and Nb and pyrochlore are found in smaller quantities. FOS 2 has a similar mineral composition but contains much less olivine, magnetite is enriched in Mg, and the phlogopite is enriched in Ba and Al. Of the accessory minerals, pyrochlore predominates and is enriched in Ta, Th, and U; baddeleyite is subordinate and enriched in Nb. Chemical and textural differences suggest that the phoscorites were formed by the sequential introduction of different portions of the melt. The melt that formed the FOS 1 was enriched in Zr and REE relative to the FOS 2 melt; the melt that formed the FOS 2 was enriched in Al, Ba, Nb, Ta, Th, U, and, to a lesser extent, Sr.

Mineralogy of Dolomite Carbonatites of Sevathur Complex, Tamil Nadu, India

The main mass of the Sevathur carbonatite complex (Tamil Nadu, India) consists of dolomite carbonatite with a small number of ankerite carbonatite dikes. Calcite carbonatite occurs in a very minor amount as thin veins within the dolomite carbonatite. The age (207Pb/204Pb) of the Sevathur carbonatites is 801 ± 11 Ma, they are emplaced within the Precambrian granulite terrains along NE–SW trending fault systems. Minor minerals in dolomite carbonatite are fluorapatite, phlogopite (with a kinoshitalite component), amphibole and magnetite. Pyrochlore (rich in UO2), monazite-Ce, and barite are accessory minerals. Dolomite carbonatite at the Sevathur complex contains norsethite, calcioburbankite, and benstonite as inclusions in primary calcite and are interpreted as primary minerals. They are indicative of Na, Sr, Mg, Ba, and LREE enrichment in their parental carbonatitic magma. Norsethite, calcioburbankite, and benstonite have not been previously known at Sevathur. The hydrothermal processes at the Sevathur carbonatites lead to alteration of pyrochlore into hydropyrochlore, and Ba-enrichment. Also, it leads to formation of monazite-(Ce) and barite-II.

Crust–Mantle Xenoliths from the Kharchinsky Volcano (Central Kamchatka Depression): Mineralogy and Petrogenesis

—We present results of a study of plutonic-rock xenoliths from the Kharchinsky Volcano (Central Kamchatka depression). The studied xenolith collection comprises nine samples of peridotites and clinopyroxenites. The peridotites are identified as wehrlites, dunites, and harzburgites composed of olivine, clino- and orthopyroxenes, amphibole, and chromite in varying amounts. The clinopyroxenites consist mostly of clinopyroxene and often contain subordinate olivine, amphibole, hercynite, and magnetite. The xenoliths have interstitial segregations and veins composed of chlorite, plagioclase, K-feldspar, orthopyroxene, barite, fluorapatite, ilmenite, and, more seldom, anhydrite, phlogopite, and some other minerals. The study has revealed that veinlet minerals sometimes replace primary minerals and form pseudomorphs, thus indicating the metasomatic origin of interstitial and vein mineral assemblages. The thermobarometric calculations for minerals have shown that peridotites formed at ~1140 °C and ≤10 kbar in the intermediate chambers at the depths from the spinel stability field to the Moho. Interstitial metasomatic alterations of rocks took place at ~400–850 °C.

Simulation of Kalirejo Road Side Slope based on Altered Andesite Characters, Kulon Progo Regency, Indonesia

ABSTRACT. This study is performed to investigate the characteristics of intrusive andesite rock consisting of Kalirejo Road Side Slope located in Kulon Progo Mountains. The rocks consisting the slope are identified by visual observation of hand specimens in the field, petrographic and X-ray Diffraction (XRD) analyses of the rock samples in the laboratory, upon which genetic rock classification is determined. The altered rock types are determined by the presence of specific minerals identified in the petrographic and XRD analyses. The alteration intensity is examined by comparing the amount of secondary minerals to the primary minerals observed in the petrographic and XRD analyses. The developments of rock weathering are determined in the field GSI classification based on the visual characteristics and in the laboratory-based on the Chemical Index of Alteration (CIA) and engineering properties of the altered rocks. The results show that the rocks typically consisted of 33.2 to 59.2% plagioclase, 1.4 to 5.1% quartz, therefore, are classified as andesite. The presence of halloysite, montmorillonite, and kaolinite as secondary minerals in the altered andesite indicated that the parent andesite rocks have undergone argillic alteration. Meanwhile, the percentages of primary minerals to secondary minerals indicate that the andesite rocks have undergone moderate to high alteration intensity. Based on the visual characteristics, the research area consisted of fresh, slight weathered andesite rocks and complete weathered residual soil. The CIA values of the samples are increased with the increase in rock weathering. Identification of visual characteristics of rock weathering appeared to be in good agreement with those classified based on the CIA and engineering properties analysis results. The uniaxial compressive strength (UCS) of rocks and soils is determined by point load tests. Engineering properties of the residual soils are performed by using ASTM standard procedures. In the lower part of the roadside, slope consists of fresh and slightly weathered andesite rocks, which have relatively high strength and are classified as medium strong rocks. Meanwhile, the upper part of the slope profile contained completely weathered residual soil, which had very low compressive strength, are classified as very weak soil.Keywords: andesite, argillic alteration, Geological Strength Index (GSI), hydrothermal alteration, roadside slope, weathering