Analysis on the Effect of Shape Coefficient to Energy Saving in Residential Buildings

2012 ◽  
Vol 450-451 ◽  
pp. 1425-1428
Author(s):  
Xiao Ping Feng ◽  
Hui Lin ◽  
Yue Wang ◽  
Hu Cheng
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Residential Buildings ◽  
Residential Building ◽  
Building Energy ◽  
Shape Coefficient ◽  
Building Shape ◽  
Building Plane ◽  
The Impact ◽  
The Relationship

Building shape coefficient is an important factor in building energy saving design. In order to analyze the influence of shape coefficient to the energy consumption, a typical residential building is simulated by BECS software to analyze the changing regular patterns of the energy consumption for heating and air conditioning while the building shape coefficient is made different. The relationship between building height and shape coefficient, and the impact of the building plane layout on the energy consumption are also analyzed. The results show that the reduction of shape coefficient is benefit to enhance the effect of energy saving.

A Comparison Study on Energy Consumption of Urban Residential Buildings in Different Climatic Zones

2010 ◽  
Vol 171-172 ◽  
pp. 441-444
Author(s):  
Wei Cai ◽  
Zhao Hui Wu ◽  
Huang Wang ◽  
Xiao Man Du
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Residential Buildings ◽  
Building Energy ◽  
Building Envelope ◽  
Building Energy Efficiency ◽  
Climatic Zones ◽  
Shape Coefficient ◽  
Building Shape ◽  
Covered Area

Built environment is determined by outside climate condition. There are a lot of important factors that influence building energy consumption such as building shape coefficient, insulation work of building envelope, covered area, and the area ratio of window to wall. In order to determine how building energy efficiency works in different climate zones, the variation rule of some aggregative indicators and building energy efficiency rates were analyzed by dynamic simulation. The results show that energy conservation potential which is brought by the decrease of builidng shape coefficient is the largest in hot summer and cold winter zone such as Shanghai, and the effect is mainly brought by insulation measures added to exterior walls.

scholarly journals Re-discussion and Correction of Shape Coefficient for Residential Buildings

2019 ◽  
Vol 136 ◽  
pp. 04096
Author(s):  
Lingkun Jia ◽  
Yiru Huang ◽  
Zhietie Yue ◽  
Perry Pei-Ju Yang
Keyword(s):  
Energy Consumption ◽  
Residential Buildings ◽  
Residential Building ◽  
Building Energy ◽  
Energy Performance ◽  
Research Field ◽  
Residential Energy ◽  
Building Energy Performance ◽  
Shape Coefficient ◽  
Performance Research

As one of the critical concepts in residential energy performance research field, shape coefficient has long been disputed for its validity of evaluating energy consumption. Although suggestions have been brought forward to try to optimize this concept, these proposals still have shortcomings and have not been tested. Based on analysing these existing optimizing proposals, this paper starts from prototype study and summarizes the problems of concept of shape coefficient in terms of definition and relationship with building energy. According to these current issues, the reason for negatively influencing the accuracy of shape coefficient with regard to assessing the building energy consumption is confirmed. By correcting the expression of shape coefficient through inserting a correction factor related to story height, corrected shape coefficient is proposed. Combined with built residential building samples, the corrected and original shape coefficient is contrasted at the macro statistical and micro experimental levels respectively. It is found that the new coefficient has closer correlation with residential building energy performance and is more accurate in evaluating the energy consumption.

scholarly journals Decarbonization of Residential Building Energy Supply: Impact of Cogeneration System Performance on Energy, Environment, and Economics

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2538
Author(s):  
Praveen K. Cheekatamarla
Keyword(s):  
Carbon Dioxide ◽  
Power Generation ◽  
Energy Consumption ◽  
Carbon Footprint ◽  
Residential Buildings ◽  
Building Energy ◽  
Primary Energy ◽  
Primary Energy Consumption ◽  
Cogeneration System ◽  
The Impact

Electrical and thermal loads of residential buildings present a unique opportunity for onsite power generation, and concomitant thermal energy generation, storage, and utilization, to decrease primary energy consumption and carbon dioxide intensity. This approach also improves resiliency and ability to address peak load burden effectively. Demand response programs and grid-interactive buildings are also essential to meet the energy needs of the 21st century while addressing climate impact. Given the significance of the scale of building energy consumption, this study investigates how cogeneration systems influence the primary energy consumption and carbon footprint in residential buildings. The impact of onsite power generation capacity, its electrical and thermal efficiency, and its cost, on total primary energy consumption, equivalent carbon dioxide emissions, operating expenditure, and, most importantly, thermal and electrical energy balance, is presented. The conditions at which a cogeneration approach loses its advantage as an energy efficient residential resource are identified as a function of electrical grid’s carbon footprint and primary energy efficiency. Compared to a heat pump heating system with a coefficient of performance (COP) of three, a 0.5 kW cogeneration system with 40% electrical efficiency is shown to lose its environmental benefit if the electrical grid’s carbon dioxide intensity falls below 0.4 kg CO2 per kWh electricity.

scholarly journals Modifying Building Energy-Saving Design Based on Field Research into Climate Features and Local Residents’ Habits

Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 442
Author(s):  
Xiaoyue Zhu ◽  
Bo Gao ◽  
Xudong Yang ◽  
Zhong Yu ◽  
Ji Ni
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Residential Buildings ◽  
Average Energy ◽  
Field Tests ◽  
Building Energy ◽  
Building Energy Efficiency ◽  
Local Conditions ◽  
Building Energy Saving ◽  
Average Energy Consumption

In China, a surging urbanization highlights the significance of building energy conservation. However, most building energy-saving schemes are designed solely in compliance with prescriptive codes and lack consideration of the local situations, resulting in an unsatisfactory effect and a waste of funds. Moreover, the actual effect of the design has yet to be thoroughly verified through field tests. In this study, a method of modifying conventional building energy-saving design based on research into the local climate and residents’ living habits was proposed, and residential buildings in Panzhihua, China were selected for trial. Further, the modification scheme was implemented in an actual project with its effect verified by field tests. Research grasps the precise climate features of Panzhihua, which was previously not provided, and concludes that Panzhihua is a hot summer and warm winter zone. Accordingly, the original internal insulation was canceled, and the shading performance of the windows was strengthened instead. Test results suggest that the consequent change of SET* does not exceed 0.5 °C, whereas variations in the energy consumption depend on the room orientation. For rooms receiving less solar radiation, the average energy consumption increased by approximately 20%, whereas for rooms with a severe western exposure, the average energy consumption decreased by approximately 11%. On the other hand, the cost savings of removing the insulation layer are estimated at 177 million RMB (1 USD ≈ 6.5 RMB) per year. In conclusion, the research-based modification method proposed in this study can be an effective tool for improving building energy efficiency adapted to local conditions.

scholarly journals Analysis of Office Rooms Energy Consumption Data in Respect to Meteorological and Direct Sun Exposure Conditions

Energies ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7590
Author(s):  
Adam Kula ◽  
Albert Smalcerz ◽  
Maciej Sajkowski ◽  
Zygmunt Kamiński
Keyword(s):  
Energy Consumption ◽  
Public Service ◽  
Residential Buildings ◽  
Sun Exposure ◽  
Building Energy ◽  
The West ◽  
Building Energy Management ◽  
Consumption Data ◽  
Office Rooms ◽  
The Impact

There are many papers concerning the consumption of energy in different buildings. Most describe residential buildings, with only a few about office- or public service buildings. Few articles showcase the use of energy consumption in specific rooms of a building, directed in different geographical directions. On the other hand, many publications present methods, such as machine learning or AI, for building energy management and prediction of its consumption. These methods have limitations and represent a certain level of uncertainty. In order to compare energy consumption of different rooms, the measurements of particular building-room parameters were collected and analyzed. The obtained results showcase the effect of room location, regarding geographical directions, for the consumption of energy for heating. For south-exposed rooms, due to sun radiation, it is possible to switch heating off completely, and even overheating of 3 °C above the 22 °C temperature set point occurs. The impact of the sun radiation for rooms with a window directed east or west reached about 1 °C and lasts for a few hours before noon for the east, and until late afternoon for the west.

scholarly journals Long-Term Prediction of Weather for Analysis of Residential Building Energy Consumption in Australia

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4805
Author(s):  
Shu Chen ◽  
Zhengen Ren ◽  
Zhi Tang ◽  
Xianrong Zhuo
Keyword(s):  
Climate Change ◽  
Energy Consumption ◽  
Residential Building ◽  
Building Energy ◽  
Space Heating ◽  
Building Energy Consumption ◽  
Climate Zones ◽  
Impact Of Climate Change ◽  
Heating And Cooling ◽  
The Impact

Globally, buildings account for nearly 40% of the total primary energy consumption and are responsible for 20% of the total greenhouse gas emissions. Energy consumption in buildings is increasing with the increasing world population and improving standards of living. Current global warming conditions will inevitably impact building energy consumption. To address this issue, this report conducted a comprehensive study of the impact of climate change on residential building energy consumption. Using the methodology of morphing, the weather files were constructed based on the typical meteorological year (TMY) data and predicted data generated from eight typical global climate models (GCMs) for three representative concentration pathways (RCP2.6, RCP4.5, and RCP8.5) from 2020 to 2100. It was found that the most severe situation would occur in scenario RCP8.5, where the increase in temperature will reach 4.5 °C in eastern Australia from 2080–2099, which is 1 °C higher than that in other climate zones. With the construction of predicted weather files in 83 climate zones all across Australia, ten climate zones (cities)—ranging from heating-dominated to cooling-dominated regions—were selected as representative climate zones to illustrate the impact of climate change on heating and cooling energy consumption. The quantitative change in the energy requirements for space heating and cooling, along with the star rating, was simulated for two representative detached houses using the AccuRate software. It could be concluded that the RCP scenarios significantly affect the energy loads, which is consistent with changes in the ambient temperature. The heating load decreases for all climate zones, while the cooling load increases. Most regions in Australia will increase their energy consumption due to rising temperatures; however, the energy requirements of Adelaide and Perth would not change significantly, where the space heating and cooling loads are balanced due to decreasing heating and increasing cooling costs in most scenarios. The energy load in bigger houses will change more than that in smaller houses. Furthermore, Brisbane is the most sensitive region in terms of relative space energy changes, and Townsville appears to be the most sensitive area in terms of star rating change in this study. The impact of climate change on space building energy consumption in different climate zones should be considered in future design strategies due to the decades-long lifespans of Australian residential houses.

scholarly journals The Viability of Energy Auditing in Countries with Low Energy Cost: A Case Study of a Residential Building in Cold Climates

Designs ◽  
2019 ◽  
Vol 3 (3) ◽  
pp. 42 ◽  
Author(s):  
Ebrahim Solgi ◽  
Zahra Hamedani ◽  
Shahab Sherafat ◽  
Ruwan Fernando ◽  
Farshid Aram
Keyword(s):  
Computer Simulation ◽  
Energy Consumption ◽  
Energy Conservation ◽  
Energy Saving ◽  
Residential Building ◽  
Cold Climate ◽  
Conservation Strategies ◽  
Linear Regression Method ◽  
Effective Measure ◽  
The Impact

The continuing importance of energy conservation in the building sector has drawn major attention to energy audits of existing buildings in different climates. In this paper, the energy conservation potential of a residential building located in Iran’s cold climate was investigated through an analysis of its actual energy consumption and through computer simulation. The building base-load was determined using a linear regression method based on existing energy bills, and was used to validate the computer simulation of its energy usage. The impact of typical energy saving solutions was evaluated for three cost refurbishment scenarios: low, medium and high. The results show that the existing construction and envelope materials fail to meet the national standards of Iran, but insulating the envelope was found to be a more cost-effective measure than modifying the windows. The results also demonstrate that although the use of energy-saving solutions has a significant impact on energy consumption, even the most economic solutions investigated will have a payback period longer than one decade. Thus, with current energy prices the reviewed energy conservation strategies are not economically justified in Iran from the consumer perspective, as investment in the methods considered typical in other parts of the world will not show a return for at least a half-century.

DWELLING FACTORS EFFECT ON RESIDENTIAL BUILDING ENERGY CONSUMPTION

2015 ◽  
Vol 77 (15) ◽  
Author(s):  
Jibrin Hassan Suleiman ◽  
Saeed Balubaid ◽  
Nasiru Mohammed Zakari ◽  
Egba Ernest Ituma
Keyword(s):  
Energy Consumption ◽  
Residential Buildings ◽  
Residential Building ◽  
Building Energy ◽  
Building Energy Consumption ◽  
Refrigeration System ◽  
Rapid Urbanization ◽  
Air Conditioning System ◽  
Household Heads ◽  
Self Administered Questionnaire

Most of the developing countries experience rapid urbanization and population growth, Malaysia is among these countries as the population and the energy consumption in the country tremendously increased over the last few decades.  A major challenge is the rate of energy consumption in the country is tremendous going higher which is a threat as the country was listed 26th out of the 30 top greenhouse emitters in the world.  A survey was conducted on the ways occupants’ consumes energy in their residential buildings in relation to dwelling factors in the State of Johor Malaysia. Energy consumption of the residential owners was assessed using drop and pick self-administered questionnaire. The questionnaires were answered by each household heads. Air conditioning system, refrigeration system, kitchen appliances, bathroom and laundry appliances, lighting appliances as well as other home appliances was considered in the survey. Correlation analysis was used using Statistical Package for Social Sciences (SPSS) to analyze the results. The finding shows a positive relationship between dwelling factors.  r ≥ 0.3 and above between dwelling factors and residential building energy consumption. 

Energy Consumption and Economic Analysis to Residential Building Meeting the Criterion of 65% Energy Saving in Zhangjiakou

2011 ◽  
Vol 225-226 ◽  
pp. 239-242 ◽  
Author(s):  
Hong Lei Ma ◽  
Jian Hui Niu
Keyword(s):  
Energy Consumption ◽  
Economic Analysis ◽  
Energy Saving ◽  
Residential Building ◽  
Building Energy ◽  
Simulation Software ◽  
Design Standard ◽  
Third Stage ◽  
Building Energy Saving ◽  
Saving Effect

An energy saving residential building in Zhangjiakou was took as research object, which was designed and constructed according to the criterion of 65% energy saving of the third stage, utilizing simulation software Dest, which was developed by Qinghua University, energy consumption simulation and economic analysis were done to the building. The results show that compared with the former residence which was built according to the non-energy saving design, the implementation of new design standard for building energy saving can not only achieve better energy saving effect, but also its payback period is short, so the new design standard for building energy saving is worth spreading.

Research on Energy Optimization and the Effect Factors of Energy Consumption about Residential Buildings in Inner Mongolia

2013 ◽  
Vol 368-370 ◽  
pp. 1322-1326
Author(s):  
Guo Hui Jin ◽  
Huai Zhu Wang
Keyword(s):  
Energy Consumption ◽  
Inner Mongolia ◽  
Residential Buildings ◽  
Rapid Development ◽  
Influence Factors ◽  
Residential Building ◽  
Building Energy ◽  
Effect Factors ◽  
Building Energy Conservation ◽  
Building Energy Saving

With the rapid development of national economy in china, the proportion of the building consumption in energy consumption is rising year by year. This paper will analyze energy influence factors of consumption of residential building in Inner Mongolia. According to these factors, it will optimize the energy consumption of residential building energy saving research . In the end , the thesis will put up some measures to optimization of conserve energy and provide guidance and help for residential building energy conservation in Inner Mongolia.

Sign in / Sign up

Export Citation Format

Share Document