Phosphate Removal from Aqueous Solution Using Fly Ash Modified with Magnetic Fe-Zn Bimetal Oxide

2012 ◽  
Vol 621 ◽  
pp. 296-302
Author(s):  
Ke Xu ◽  
Tong Deng ◽  
Chun Guang Li ◽  
Jun Ling Niu
Keyword(s):  
Aqueous Solution ◽  
Fly Ash ◽  
Langmuir Isotherm ◽  
Phosphate Removal ◽  
Phosphate Adsorption ◽  
Order Model ◽  
Initial Concentration ◽  
Pseudo Second Order ◽  
Ph Range ◽  
Modified Fly Ash

In this work the adsorption of phosphate using the magnetic Fe-Zn bimetal oxide modified fly ash was studied. The experimental results showed that the effective pH range for the adsorption of phosphate was between 3.0 and 9.0. The removal percentage of phosphate reached maximum at pH 8.0. Kinetic study showed that the phosphate adsorption was well described by pseudo second order model. The removal efficiency of phosphate increased with the increase of adsorbent dosage and the decrease of the initial concentration. The adsorption of phosphate could be described well by Langmuir isotherm, the Langmuir constant Q0 was 24.15mg/g.

Phosphate Removal from Aqueous Solution Using Fly Ash Modified with Fe-Cu Bimetal Oxide

2013 ◽  
Vol 438-439 ◽  
pp. 42-45 ◽  
Author(s):  
Ke Xu ◽  
Xu Luo ◽  
Chun Guang Li ◽  
Jun Ling Niu
Keyword(s):  
Aqueous Solution ◽  
Fly Ash ◽  
Removal Efficiency ◽  
Langmuir Isotherm ◽  
Phosphate Removal ◽  
Experimental Results ◽  
Initial Concentration ◽  
Adsorbent Dosage ◽  
Ph Range ◽  
Modified Fly Ash

In this work the adsorption of phosphate using the Fe-Cu bimetal oxide modified fly ash was studied. The experimental results showed that phosphate could be effectively removed in the pH range between 4 and 10. The removal percentage of phosphate reached maximum at pH 6.0. The adsorption of phosphate by the modified fly ash was rapid, and the adsorption percentage of phosphate could reach 91.20% in 5 minutes. The removal efficiency of phosphate increased with the increase of adsorbent dosage and the decrease of the initial concentration. The adsorption of phosphate could be described well by Langmuir isotherm, the Langmuir constant Q0 was 26.03mg/g.

scholarly journals Removal of phosphate from coating wastewater using magnetic Fe-Cu bimetal oxide modified fly ash

2015 ◽  
Vol 6 (3) ◽  
pp. 430-436 ◽  
Author(s):  
Ke Xu ◽  
He Tao ◽  
Tong Deng
Keyword(s):  
Fly Ash ◽  
Langmuir Model ◽  
Experimental Results ◽  
Phosphate Adsorption ◽  
Order Model ◽  
Freundlich Model ◽  
Maximum Capacity ◽  
Adsorption Time ◽  
Pseudo Second Order ◽  
Modified Fly Ash

In this work, magnetic Fe-Cu bimetal oxide modified fly ash was used to remove phosphate from coating wastewater. The influences of pH, dosage amount and adsorption time on the removal of phosphate were investigated. The experimental results showed that pH had a significant effect on the adsorption of phosphate. The removal percentage of phosphate reached a maximum at pH 10. The removal efficiency of phosphate increased with the increase in adsorbent dosage. A kinetic study showed that the phosphate adsorption was well described by a pseudo second order model. The adsorption isotherm of phosphate could be described by the Langmuir model and Freundlich model. The Langmuir maximum capacity Q0 was 12.69 mg/g and the value of n of the Freundlich model was 3.82. The experimental results indicated that magnetic Fe-Cu bimetal oxide modified fly ash was a potential adsorbent for the removal of phosphate from the wastewater.

Studies on Phosphate Removal from Aqueous Solution by Honeycomb-Cinder Slag

2012 ◽  
Vol 217-219 ◽  
pp. 862-865
Author(s):  
Li Jun Wang ◽  
Hua Yong Zhang ◽  
Lu Yi Zhang
Keyword(s):  
Aqueous Solution ◽  
Phosphate Removal ◽  
Solution Temperature ◽  
Phosphate Adsorption ◽  
Order Model ◽  
Solution Ph ◽  
Initial Ph ◽  
Desorption Study ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

The feasibility of using honeycomb-cinder slag as an adsorbent for phosphate removal from aqueous solution was investigated in batch experiments as a function of initial pH, contact time, adsorbent dose, and solution temperature. The results indicated that the solution pH significantly influenced the phosphate adsorption; 1440 min was enough to reach equilibrium for any concentration. Langmuir isotherm model gave well fit for phosphate adsorption, and the adsorption process followed pseudo second-order model. Desorption study exhibited that the phosphate adsorption on the honeycomb-cinder slag is not completely reversible. Results showed that honeycomb-cinder slag could be used as an adsorbent to uptake phosphate from wastewater.

Adsorption Capacity of Cr(VI) by Modified Fly Ash from Aqueous Solution

2011 ◽  
Vol 393-395 ◽  
pp. 1089-1092
Author(s):  
Ru Liu ◽  
Xiao Xia Hang ◽  
Chun Ying Wang
Keyword(s):  
Aqueous Solution ◽  
Fly Ash ◽  
Langmuir Isotherm ◽  
Adsorption Process ◽  
Ph Value ◽  
Exothermal Reaction ◽  
Initial Concentration ◽  
Isotherm Equation ◽  
Langmuir Isotherm Equation ◽  
Modified Fly Ash

Various parameters (time, initial concentration, pH value and temperature) are investigated. The results show that with increasing the temperature decreased the absorbance. The optimal condition is that the maximum adsorption is 0.47mg•g-1 at303K, pH 1. Adsorption process fits the Langmuir isotherm equation, the adsorption reaction is exothermal reaction.

scholarly journals Possibility of Removing Pb and Cd from Polluted Water by Modified Fly Ash

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Xi Chen ◽  
Guibin Zhang ◽  
Jingtian Li ◽  
Puhui Ji
Keyword(s):  
Fly Ash ◽  
Adsorption Capacity ◽  
Polluted Water ◽  
Mass Ratio ◽  
Order Model ◽  
Adsorption Performance ◽  
Pseudo Second Order ◽  
Roasting Temperature ◽  
Polluted Wastewater ◽  
Modified Fly Ash

In this study, fly ash (FA) was modified by sodium hydroxide to prepare a new adsorption material (IP) and treat Pb2+- and Cd2+-polluted wastewater. The effect of preparation parameters (mass ratio of FA/NaOH and modification temperature) on IP adsorption performance was investigated. The results indicated that the IP4 showed the highest adsorption capacity prepared at the FA/NaOH mass ratio of 1 : 2 and the roasting temperature of 250°C. The IP4 was characterized by SEM, EDX, XRD, and FTIR analyses. The results showed that the surface morphology and microstructure of FA were significantly changed. Furthermore, in order to study the adsorption performance of Pb2+ and Cd2+ on IP4, the different initial concentrations of Pb2+ and Cd2+, pH, and contact time were analyzed, and the results indicated that IP4 has excellent adsorption capacity for heavy metals. In addition, kinetic model results demonstrated that the adsorption behavior of Pb2+ and Cd2+ on IP4 was better described by a pseudo-second-order model.

scholarly journals FLY ASH MAGNETIC ADSORBENT FOR CADMIUM ION REMOVAL FROM AN AQUEOUS SOLUTION

2021 ◽  
Vol 185 (1) ◽  
pp. 42-50
Author(s):  
Gabriela BUEMA ◽  
Nicoleta LUPU ◽  
Horia CHIRIAC ◽  
Dumitru Daniel HEREA ◽  
Lidia FAVIER ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Fly Ash ◽  
Adsorption Capacity ◽  
Second Order ◽  
Order Model ◽  
Cadmium Ion ◽  
Cadmium Ions ◽  
Ion Removal ◽  
Pseudo Second Order ◽  
Second Order Model

The fly ash generated from a Romanian power plant was used as a starting material in this study. The aim of the study was to obtain a low cost material based on the treatment of fly ash with Fe3O4 for utilization as an adsorbent for cadmium ion removal. The adsorbent that was synthesized was characterized using different techniques. The adsorption process was investigated by the batch technique at room temperature. The quantity of cadmium ion adsorbed was measured spectrophotometrically. The experimental data showed that the material can remove cadmium ions at all three working concentrations. The adsorption capacity increased with an increase in concentration, respectively contact time. The results were analyzed through two kinetic models: pseudo first order and pseudo second order. The kinetics results of cadmium adsorption onto a magnetic material are in good agreement with a pseudo second order model, with a maximum adsorption capacity of 4.03 mg/g, 6.73 mg/g, and 9.65 mg/g. Additionally, the pseudo second order model was linearized into its four types. The results indicated that the material obtained show the ability to remove cadmium ions from an aqueous solution.

Kinetics and Thermodynamic Investigation of Phosphate Adsorption on AlCl3 Modified Palygorskite

2013 ◽  
Vol 683 ◽  
pp. 530-533
Author(s):  
Yan Zhang ◽  
Xian Jun Lv ◽  
Xiao Yan Kou
Keyword(s):  
Aqueous Solutions ◽  
Langmuir Isotherm ◽  
Goodness Of Fit ◽  
Phosphate Adsorption ◽  
Order Model ◽  
Thermodynamic Investigation ◽  
Process Kinetics ◽  
Pseudo Second Order ◽  
Modified Palygorskite ◽  
Kinetics And Thermodynamic

The potential of AlCl3 modified palygorskite was assessed for adsorption of phosphate from aqueous solutions. The Langmuir isotherm adequately described adsorption with an R2 goodness of fit of 0.9683. The process kinetics was found to follow the pseudo-second-order model. Positive △H and △S values indicated that the adsorption of phosphate onto AlCl3 modified palygorskite was endothermic. Negative △G showed that the adsorption of phosphate onto this sorbent is feasible and spontaneous.

Study on the phosphate removal from aqueous solution using modified fly ash

Fuel ◽  
2010 ◽  
Vol 89 (12) ◽  
pp. 3668-3674 ◽  
Author(s):  
Ke Xu ◽  
Tong Deng ◽  
Juntan Liu ◽  
Weigong Peng
Keyword(s):  
Aqueous Solution ◽  
Fly Ash ◽  
Phosphate Removal ◽  
Modified Fly Ash

scholarly journals Kinetic and Thermodynamic Studies on the Phosphate Adsorption Removal by Dolomite Mineral

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Xiaoli Yuan ◽  
Wentang Xia ◽  
Juan An ◽  
Jianguo Yin ◽  
Xuejiao Zhou ◽  
...  
Keyword(s):  
Adsorption Kinetics ◽  
Removal Rate ◽  
Second Order ◽  
Phosphate Removal ◽  
Phosphate Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Model ◽  
Thermodynamic Studies ◽  
Pseudo Second Order ◽  
Second Order Model

The efficiency of dolomite to remove phosphate from aqueous solutions was investigated. The experimental results showed that the removal of phosphate by dolomite was rapid (the removal rate over 95% in 60 min) when the initial phosphate concentration is at the range of 10–50 mg/L. Several kinetic models including intraparticle diffusion model, pseudo-first-order model, Elovich model, and pseudo-second-order model were employed to evaluate the kinetics data of phosphate adsorption onto dolomite and pseudo-second-order model was recommended to describe the adsorption kinetics characteristics. Further analysis of the adsorption kinetics indicated that the phosphate removal process was mainly controlled by chemical bonding or chemisorption. Moreover, both Freundlich and Langmuir adsorption isotherms were used to evaluate the experimental data. The results indicated that Langmuir isotherm was more suitable to describe the adsorption characteristics of dolomite. Maximum adsorption capacity of phosphate by dolomite was found to be 4.76 mg phosphorous/g dolomite. Thermodynamic studies showed that phosphate adsorption was exothermic. The study implies that dolomite is an excellent low cost material for phosphate removal in wastewater treatment process.

scholarly journals Efficient capture of phosphate from aqueous solution using acid activated akadama clay and mechanisms analysis

2018 ◽  
Vol 78 (7) ◽  
pp. 1603-1614 ◽  
Author(s):  
Ying Wang ◽  
Hui He ◽  
Nan Zhang ◽  
Kazuya Shimizu ◽  
Zhongfang Lei ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Ph Effect ◽  
Phosphate Removal ◽  
Phosphate Adsorption ◽  
Order Kinetic ◽  
Negative Effects ◽  
Initial Ph ◽  
Intra Particle Diffusion ◽  
Langmuir Isotherm Model ◽  
Ph Range

Abstract In this study, akadama clay, a kind of volcano ash, was activated with sulfuric acid and then evaluated for the adsorption of phosphate from aqueous solution via batch experiments. The effects of adsorbent dose, initial pH and coexisting anions on phosphate removal by natural akadama clay and acid-activated akadama clay were investigated. Based on the pH effect, the modified adsorbent could efficiently capture phosphate over a wider pH range of 3.00–6.00 than natural akadama clay. Competitive anions showed negative effects on the phosphate adsorption, especially citrate and carbonate. The adsorption process followed the pseudo-second-order kinetic equation and the intra-particle diffusion. Langmuir isotherm model was found to fit the data better than Freundlich model, and the maximum adsorption capacities of phosphate onto the natural akadama clay and acid-activated akadama clay were 5.88 and 9.19 mg/g, respectively. Furthermore, thermodynamic studies confirmed that the adsorption of acid-activated akadama clay was a spontaneous process. The mechanisms of phosphate adsorption on the clay could be ascribed to electrostatic attraction and ligand exchange. These results suggest that after modification, acid-activated akadama clay could be used as a promising adsorbent for phosphate removal from wastewater in real application and then further used as fertilizers.

Sign in / Sign up

Export Citation Format

Share Document