Preparation and Study of Biomimetic Ring CoCl2/CS Biological Bar

2013 ◽  
Vol 647 ◽  
pp. 368-373
Author(s):  
Wen Feng Xu ◽  
Zeng Lian Li ◽  
Kui Li ◽  
Xiao Ling Liao
Keyword(s):  
Tissue Engineering ◽  
Bone Defect ◽  
Bone Transplantation ◽  
Precipitation Method ◽  
Deposition Method ◽  
Biomimetic Materials ◽  
Wide Range ◽  
Repair Bone Defect ◽  
Chitosan Gel

Exploring an effective replacement material of bone transplantation to repair bone defect is the hot topic in bone defect therapy at present. The biomimetic materials will be the main dircetion. Chitosan, the N-deacetylated derivative of chitin, has been regarded as suitable materials because of its biocompatibility, biodegradability, reliability and wide sources, which is the next generation of promising materials for tissue engineering. This study introduce the best CoCl2_-Chitosan-gel-sticks of different concentrations prepared by using the in-situ Precipitation Method and Alternate deposition Method. This investigation progeny will have a wide range of applications in biological materials field and other fields.

scholarly journals An in situ tissue engineering scaffold with growth factors combining angiogenesis and osteoimmunomodulatory functions for advanced periodontal bone regeneration

2021 ◽  
Vol 19 (1) ◽  
Author(s):  
Tian Ding ◽  
Wenyan Kang ◽  
Jianhua Li ◽  
Lu Yu ◽  
Shaohua Ge
Keyword(s):  
Tissue Engineering ◽  
Growth Factors ◽  
Bone Regeneration ◽  
Bone Defect ◽  
Bone Repair ◽  
Macrophage Polarization ◽  
Tissue Engineering Scaffold ◽  
Bone Morphogenetic Protein 2 ◽  
In Situ Tissue Engineering

Abstract Background The regeneration of periodontal bone defect remains a vital clinical challenge. To date, numerous biomaterials have been applied in this field. However, the immune response and vascularity in defect areas may be key factors that are overlooked when assessing the bone regeneration outcomes of biomaterials. Among various regenerative therapies, the up-to-date strategy of in situ tissue engineering stands out, which combined scaffold with specific growth factors that could mimic endogenous regenerative processes. Results Herein, we fabricated a core/shell fibrous scaffold releasing basic fibroblast growth factor (bFGF) and bone morphogenetic protein-2 (BMP-2) in a sequential manner and investigated its immunomodulatory and angiogenic properties during periodontal bone defect restoration. The in situ tissue engineering scaffold (iTE-scaffold) effectively promoted the angiogenesis of periodontal ligament stem cells (PDLSCs) and induced macrophage polarization into pro-healing M2 phenotype to modulate inflammation. The immunomodulatory effect of macrophages could further promote osteogenic differentiation of PDLSCs in vitro. After being implanted into the periodontal bone defect model, the iTE-scaffold presented an anti-inflammatory response, provided adequate blood supply, and eventually facilitated satisfactory periodontal bone regeneration. Conclusions Our results suggested that the iTE-scaffold exerted admirable effects on periodontal bone repair by modulating osteoimmune environment and angiogenic activity. This multifunctional scaffold holds considerable promise for periodontal regenerative medicine and offers guidance on designing functional biomaterials. Graphic Abstract

Microstructural and Mechanical Properties of Polymer-Based Scaffolds Reinforced by Hydroxyapatite

2007 ◽  
Vol 544-545 ◽  
pp. 765-768 ◽  
Author(s):  
Hyeong Ho Jin ◽  
Won Ki Lee ◽  
Hong Chae Park ◽  
Seog Young Yoon
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Yield Strength ◽  
Pore Size ◽  
Compressive Modulus ◽  
Precipitation Method ◽  
Pore Morphology ◽  
Composite Scaffolds ◽  
Co Precipitation

Various polymer-based scaffolds reinforced by the hydroxyapatite (HAp) for bone tissue engineering were successfully synthesized by in-situ co-precipitation method. The influence of HAp in composite scaffolds on the pore morphology, microstructure, and mechanical properties was investigated. The polymer-based scaffolds appeared to be macroporous and an interconnected open pore microstructure with pore size around 200 μm. The pore structure of the composite scaffolds was not much changed by the presence of HAp but the pore size of the composite scaffolds decreased with adding the HAp. The compressive modulus and yield strength of the polymer-based scaffolds improved by the presence of HAp.

Tough biodegradable chitosan–gelatin hydrogels via in situ precipitation for potential cartilage tissue engineering

RSC Advances ◽  
2015 ◽  
Vol 5 (69) ◽  
pp. 55640-55647 ◽  
Author(s):  
Zhi-Sen Shen ◽  
Xiang Cui ◽  
Rui-Xia Hou ◽  
Qun Li ◽  
Hong-Xia Deng ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Cartilage Tissue Engineering ◽  
High Strength ◽  
Cartilage Tissue ◽  
Precipitation Method ◽  
Composite Hydrogels ◽  
Controlled Structures

Chitosan/gelatin composite hydrogels with high strength are prepared by a precipitation method, possess controlled structures and biodegradability, support chondrocyte adhesion and growth, and may have potentials to cartilage tissue engineering.

In-situ electrical-resistivity measurements in the high-voltage electron microscope

1978 ◽  
Vol 36 (1) ◽  
pp. 68-69
Author(s):  
W. E. King
Keyword(s):  
Electrical Resistivity ◽  
Electron Microscope ◽  
High Voltage ◽  
Resistivity Measurements ◽  
Voltage Electron ◽  
High Voltage Electron Microscope ◽  
High Voltage Electron ◽  
Wide Range ◽  
Helium Gas

A side-entry type, helium-temperature specimen stage that has the capability of in-situ electrical-resistivity measurements has been designed and developed for use in the AEI-EM7 1200-kV electron microscope at Argonne National Laboratory. The electrical-resistivity measurements complement the high-voltage electron microscope (HVEM) to yield a unique opportunity to investigate defect production in metals by electron irradiation over a wide range of defect concentrations.A flow cryostat that uses helium gas as a coolant is employed to attain and maintain any specified temperature between 10 and 300 K. The helium gas coolant eliminates the vibrations that arise from boiling liquid helium and the temperature instabilities due to alternating heat-transfer mechanisms in the two-phase temperature regime (4.215 K). Figure 1 shows a schematic view of the liquid/gaseous helium transfer system. A liquid-gas mixture can be used for fast cooldown. The cold tip of the transfer tube is inserted coincident with the tilt axis of the specimen stage, and the end of the coolant flow tube is positioned without contact within the heat exchanger of the copper specimen block (Fig. 2).

In situ Tissue Engineering for Regeneration of Tracheal : Human Clinical Cases

2007 ◽  
Vol 58 (2) ◽  
pp. 201-202
Author(s):  
Y. Tada ◽  
T. Suzuki ◽  
Y. Nomoto ◽  
S. Kanemaru ◽  
T. Nakamura ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
In Situ Tissue Engineering ◽  
Clinical Cases

Site specific agricultural soil management with the use of new technologies

2013 ◽  
Vol 16 (1) ◽  
pp. 59-67
Keyword(s):  
New Technologies ◽  
Digital Interface ◽  
Appropriate Treatment ◽  
Wide Range ◽  
Soil Variation ◽  
Soil Information ◽  
Remote Sensing Techniques ◽  
Agricultural Areas

<p>The Soil Science Institute of Thessaloniki produces new digitized Soil Maps that provide a useful electronic database for the spatial representation of the soil variation within a region, based on in situ soil sampling, laboratory analyses, GIS techniques and plant nutrition mathematical models, coupled with the local land cadastre. The novelty of these studies is that local agronomists have immediate access to a wide range of soil information by clicking on a field parcel shown in this digital interface and, therefore, can suggest an appropriate treatment (e.g. liming, manure incorporation, desalination, application of proper type and quantity of fertilizer) depending on the field conditions and cultivated crops. A specific case study is presented in the current work with regards to the construction of the digitized Soil Map of the regional unit of Kastoria. The potential of this map can easily be realized by the fact that the mapping of the physicochemical properties of the soils in this region provided delineation zones for differential fertilization management. An experiment was also conducted using remote sensing techniques for the enhancement of the fertilization advisory software database, which is a component of the digitized map, and the optimization of nitrogen management in agricultural areas.</p>

Scaffolds for Drug Delivery in Tissue Engineering

2008 ◽  
Vol 1 (2) ◽  
pp. 113-123 ◽  
Author(s):  
Vikas V. Gaikwad ◽  
Abasaheb B. Patil ◽  
Madhuri V. Gaikwad
Keyword(s):  
Drug Delivery ◽  
Tissue Engineering ◽  
Heart Diseases ◽  
Cartilage Regeneration ◽  
Tissue Growth ◽  
The Body ◽  
Patient Specific ◽  
In Situ Gel ◽  
Heart Muscle Cells

Scaffolds are used for drug delivery in tissue engineering as this system is a highly porous structure to allow tissue growth.  Although several tissues in the body can regenerate, other tissue such as heart muscles and nerves lack regeneration in adults. However, these can be regenerated by supplying the cells generated using tissue engineering from outside. For instance, in many heart diseases, there is need for heart valve transplantation and unfortunately, within 10 years of initial valve replacement, 50–60% of patients will experience prosthesis associated problems requiring reoperation. This could be avoided by transplantation of heart muscle cells that can regenerate. Delivery of these cells to the respective tissues is not an easy task and this could be done with the help of scaffolds. In situ gel forming scaffolds can also be used for the bone and cartilage regeneration. They can be injected anywhere and can take the shape of a tissue defect, avoiding the need for patient specific scaffold prefabrication and they also have other advantages. Scaffolds are prepared by biodegradable material that result in minimal immune and inflammatory response. Some of the very important issues regarding scaffolds as drug delivery systems is reviewed in this article.

Indium Bromide-catalyzed Unprecedented Hydrogenolysis: A Novel One-Pot Synthesis of Per-O-Acetylated β-carboxymethyl O and S-glycosides

2020 ◽  
Vol 24 (8) ◽  
pp. 900-908
Author(s):  
Ram Naresh Yadav ◽  
Amrendra K Singh ◽  
Bimal Banik
Keyword(s):  
Asymmetric Synthesis ◽  
Chiral Auxiliary ◽  
Bioactive Molecules ◽  
One Pot ◽  
Enantiomerically Pure ◽  
Stereoselective Glycosylation ◽  
One Pot Synthesis ◽  
Wide Range

Numerous O (oxa)- and S (thia)-glycosyl esters and their analogous glycosyl acids have been accomplished through stereoselective glycosylation of various peracetylated bromo sugar with benzyl glycolate using InBr3 as a glycosyl promotor followed by in situ hydrogenolysis of resulting glycosyl ester. A tandem glycosylating and hydrogenolytic activity of InBr3 has been successfully investigated in a one-pot procedure. The resulting synthetically valuable and virtually unexplored class of β-CMGL (glycosyl acids) could serve as an excellent potential chiral auxiliary in the asymmetric synthesis of a wide range of enantiomerically pure medicinally prevalent β-lactams and other bioactive molecules of diverse medicinal interest.

Sign in / Sign up

Export Citation Format

Share Document