Design of Embedded Remote Fire Alarm Module

2013 ◽  
Vol 722 ◽  
pp. 511-514
Author(s):  
Ai Min Xiong ◽  
Fei Yu Li ◽  
Jia Wen Wen
Keyword(s):  
Data Communication ◽  
Mobile Network ◽  
Dual Band ◽  
Time Data ◽  
Fire Control ◽  
C Language ◽  
Fire Alarm ◽  
Communication Module ◽  
Band Module ◽  
Hardware Circuit

In view of the present fire electronic equipment protocol is not unified, this topic is based on the design of the TCP / IP protocol and embedded remote fire alarm module. This module uses the LPC1768 as the core chip to design the hardware circuit including input and output interface. TC35 is a GSM/GPRS wireless dual-band module used as mobile network interface. It uses C language to program. This module realizes remote two-way real-time data communication using of mobile communication module. It makes fire control system more intelligent and provides a simple and effective method to implements a network of city fire management.

Design of automatic recharging system of robot based on RFID radio frequency technology

2020 ◽  
Vol 13 ◽  
Author(s):  
Zheng Xiao
Keyword(s):  
Mobile Robot ◽  
Radio Frequency ◽  
Engineering Application ◽  
Data Communication ◽  
Computer Application ◽  
Wireless Data ◽  
Robot System ◽  
Communication Module ◽  
Upper Computer ◽  
Better Than

Background: In order to study the interference of wired transmission mode on robot motion, a mobile robot attitude calculation and debugging system based on radio frequency (RF) technology is proposed. Methods: Microcontroller STM32 has been used as the control core for the attitude information of the robot by using MEMS gyroscope and accelerometer. The optimal attitude Angle of the robot is calculated through nRF24L01 which is the core of the wireless communication module, attitude acquisition module and wireless data communication upper computer application platform. Results: The results shows that the positioning accuracy is better than±5mm. Conclusion: The experimental results show that the proposed attitude solving and debugging system of mobile robot based on RF technology has better reliability and real-time performance. The propped model is convenient for debugging of mobile robot system and has certain engineering application value.

scholarly journals Komunikasi Data Berbasis Protokol UDP pada Sistem Ubiquitous Mobile Sensing Kualitas Sumber Air

2016 ◽  
Vol 10 (2) ◽  
pp. 219
Author(s):  
Yuning Widiarti Darsono ◽  
Adianto Adianto ◽  
Mirna Apriani
Keyword(s):  
Water Quality ◽  
Real Time ◽  
Mobile Phones ◽  
Data Communication ◽  
Mobile Sensing ◽  
Time Data ◽  
Climate Change And Variability ◽  
Rapid Spread ◽  
Types Of Information ◽  
Water Quality Sensors

The need for monitoring, effective and efficient control and evaluation of water quality in regional waters Surabaya become a demand for population growth, climate change and variability in the current era of urbanization. The traditional method is done by collecting water samples, test and analyze water in the laboratory has been relatively expensive and do not have the ability to capture real-time data, analysis and information delivery fast in making decisions. On the other hand, the rapid spread in the use of mobile phones in developing countries has increased mobile data management applications. A variety of mobile applications has also increased in recent years. This is because mobile phones cheap, easy to use and can transmit multiple types of information including images and GPS data remotely. In this paper, the author describes a data communication system of  water quality resources based on UDP protocol. This system is called ubiquitous mobile sensing consisting of microcontroller Arduino, water quality sensors, and Android smartphones. It has the ability to detect temperature, dissolved oxygen (DO), pH and electrical conductivity (EC) in real time. By using this monitoring system, the data result is expected more accurate, faster and cheaper.

scholarly journals COMPARATIVE ANALYSIS OF XML AND JSON USING PHP APPLICATION PLATFORM WITH REPRESENTATIONAL STATE TRANSFER ( REST ) ARCHITECTURAL

Compiler ◽  
2013 ◽  
Vol 2 (2) ◽  
Author(s):  
Saryanto Saryanto ◽  
Sumarsono Sumarsono ◽  
Nurcahyani Dewi Retnowati
Keyword(s):  
Comparative Analysis ◽  
Web Service ◽  
Measurement Method ◽  
Data Communication ◽  
The Internet ◽  
Time Data ◽  
Xml Data ◽  
Data Measurement ◽  
The Difference ◽  
The Web

Data communication in the internet today is so complex as an example of the speed factor becomes very important in communicating, everyone wants fast data communication services provided in order to maximum. In relation to the application as a communication liaison with client server applications, web service using a data serialization format to transmit the data. Before the data is sent, either fromthe client to the server or vice versa, should be modified in a specific data format beforehand according to the web service is used. Types of data serialization format used in the web service such as XML and JSON. The method used for testing include data serialization method, data measurement method and data parsing method. Data serialization method is used to calculate the time serialization of data from the database to the form of XML and JSON in applications with PHP platform. Data measurement method used to measure the size of the XML and JSON data which based on many fields of data serialization process. Data parsing method is used to calculate the processing time and JSON parsing XML data. Results o f comparative analysis o f XML and JSON in PHP applications using thearchitecture Rest can be concluded that the test result o f the difference in time and time serialization and JSON parsing XML data is influenced by the number o f records, if the number of records the greater the difference in eating time data serialization and parsing the data the greater the time also itcan be concluded that the faster the process JSON serialization and parsing XML data is compared. Testing results o f the JSON data size is smaller than the size of XML. Data exchange using XML format has a size limit of up to 31456.31 KB while JSON XML exceeds the size limit. Testing results on the Internet when the number o f records up to 50,000 data when the data serialization and parsing time data can not be detected in the database.

scholarly journals Delay-Tolerance-Based Mobile Data Offloading Using Deep Reinforcement Learning

Sensors ◽  
2019 ◽  
Vol 19 (7) ◽  
pp. 1674 ◽  
Author(s):  
Daisuke Mochizuki ◽  
Yu Abiko ◽  
Takato Saito ◽  
Daizo Ikeda ◽  
Hiroshi Mineno
Keyword(s):  
Reinforcement Learning ◽  
Mobile Networks ◽  
Data Communication ◽  
Mobile Network ◽  
Utilization Efficiency ◽  
Bandwidth Utilization ◽  
Delay Tolerance ◽  
Data Offloading ◽  
Mobile Data ◽  
Mobile Data Offloading

The demand for mobile data communication has been increasing owing to the diversification of its purposes and the increase in the number of mobile devices accessing mobile networks. Users are experiencing a degradation in communication quality due to mobile network congestion. Therefore, improving the bandwidth utilization efficiency of cellular infrastructure is crucial. We previously proposed a mobile data offloading protocol (MDOP) for improving the bandwidth utilization efficiency. Although this method balances a load of evolved node B by taking into consideration the content delay tolerance, accurately balancing the load is challenging. In this paper, we apply deep reinforcement learning to MDOP to solve the temporal locality of a traffic. Moreover, we examine and evaluate the concrete processing while considering a delay tolerance. A comparison of the proposed method and bandwidth utilization efficiency of MDOP showed that the proposed method reduced the network traffic in excess of the control target value by 35% as compared with the MDOP. Furthermore, the proposed method improved the data transmission ratio by the delay tolerance range. Consequently, the proposed method improved the bandwidth utilization efficiency by learning how to provide the bandwidth to the user equipment when MDOP cannot be used to appropriately balance a load.

Design of Data Acquisition and LED Display System

2012 ◽  
Vol 468-471 ◽  
pp. 863-866
Author(s):  
Hai Feng Zhou ◽  
Jing De Dong ◽  
Yuan Qing Huang
Keyword(s):  
Data Acquisition ◽  
Display System ◽  
Single Chip ◽  
Single Chip Microcomputer ◽  
Display Module ◽  
Communication Module ◽  
Set Up ◽  
Led Display System ◽  
Data Acquisition Module ◽  
Hardware Circuit

This paper set up a data acquisition system by AT89C52 single chip microcomputer as control core, using the RS-232 serial manner communicated with responsibled for data acquisition of microprocessor, and used LED to display. System can be divided into data acquisition module, serial communication module, control module, keyboard module, display module, etc. System of multi-channel data acquisition can be displayed in the LED after processed. The hardware circuit and software realized design functions :data acquisition and LED display.

scholarly journals COST SIMULATION AND PERFORMANCE OPTIMIZATION OF WEB-BASED APPLICATIONS ON MOBILE CHANNELS

2006 ◽  
Vol 16 (05) ◽  
pp. 655-676
Author(s):  
MATTHIAS BOOK ◽  
VOLKER GRUHN ◽  
MALTE HÜLDER ◽  
ANDRÉ KÖHLER ◽  
ANDREAS KRIEGEL
Keyword(s):  
Performance Optimization ◽  
Response Times ◽  
Mobile Network ◽  
Time Data ◽  
Web Based ◽  
Log Files ◽  
Mobile Channel ◽  
And Performance ◽  
Time Required ◽  
The Cost

When considering the addition of a mobile presentation channel to an existing web-based application, a key question that has to be answered even before development begins is how the mobile channel's characteristics will impact the user experience and the cost of using the application. If either of these factors is outside acceptable limits, economical considerations may forbid adding the channels, even if it would be feasible from a purely technical perspective. Both of these factors depend considerably on two metrics: The time required to transmit data over the mobile network, and the volume transmitted. The PETTICOAT method presented in this paper uses the dialog flow model and web server log files of an existing application to identify typical interaction sequences and to compile volume statistics, which are then run through a tool that simulates the volume and time that would be incurred by executing the interaction sequences on a mobile channel. From the simulated volume and time data, we can then calculate the cost of accessing the application on a mobile channel, and derive suitable approaches for optimizing cost and response times.

Design and Development of Redeployable Underwater Data Communication Link for Defence Application

2017 ◽  
Vol 68 (1) ◽  
pp. 111
Author(s):  
Arun Kumar ◽  
L. Anjaneyulu
Keyword(s):  
High Speed ◽  
Data Communication ◽  
Video Camera ◽  
Physical Parameters ◽  
Communication Link ◽  
Fibre Optic ◽  
Time Data ◽  
Design And Development ◽  
Design Data ◽  
Fibre Optic Cable

<p class="p1">Testing of underwater system for defence application is carried out from submersible platform at specified depth. The underwater platform houses the article under test, equipment and instruments required to conduct the test and to control the platform. During development phase of defence systems, large numbers of sensors are mounted on the test article and data is collected to validate the design. Data acquisition system, video camera and high speed video cameras are positioned on the platform to record physical parameters and observe visually the performance of the article under evaluation. Since the data and video signals are parallely recorded on ship, the bandwidth demand for real-time data communication from underwater platform to control station is very high. The existing technology presently used for underwater communication has limitation of bandwidth and not suitable for defence application. This paper describes in detail the design and development of a re-deployable data communication link by laying a specially designed negatively buoyant fibre optic cable in high-sea from ship to underwater platform to provide higher bandwidth required for defence application. The link has been successfully used for sea state less than one during evaluation of underwater defence system. The availability of bandwidth from underwater platform to control system can be increased significantly by laying fibre optic cable in high sea. It also provides unlimited bandwidth for the above requirement.<span class="Apple-converted-space"> </span></p>

Serial Communication and Data Processing Based on Laboratory Virtual Instrument Engineering Workbench

2013 ◽  
Vol 415 ◽  
pp. 381-384
Author(s):  
Bo Ning ◽  
Xu Sheng Wang ◽  
Wen Biao Ma
Keyword(s):  
Data Processing ◽  
Virtual Instrument ◽  
Serial Communication ◽  
Main Function ◽  
Time Data ◽  
Graphical Programming ◽  
Real Time Data ◽  
Communication Module ◽  
Programming Software ◽  
Real Time Data Processing

Laboratory Virtual Instrument Engineering Workbench is a graphical programming software exploited by NI company with powerful real-time data processing and analysis functions. The paper focuses on the thread for designing and main function of serial communication module based on Laboratory Virtual Instrument Engineering Workbench and describes the function and use of the VISA function in Laboratory Virtual Instrument Engineering Workbench. Experiments show that the serial communication module is convenient, powerful, and of good portability and scalability.

Control System Design and Data Communication Realization of Road Accelerated Loading Test Equipment

2011 ◽  
Vol 383-390 ◽  
pp. 315-320 ◽  
Author(s):  
Ji Wei Zhang ◽  
Xu Guang Wang ◽  
Zhi Guang Guan
Keyword(s):  
Control System ◽  
Data Communication ◽  
Road Surface ◽  
Test Equipment ◽  
Single Chip ◽  
Operational Parameters ◽  
Loading Test ◽  
Test And Evaluation ◽  
Load Action ◽  
Hardware Circuit

Road accelerated loading test equipment is an important device for making road surface test under dynamic load action, and making test and evaluation on road structure and road surface material. The paper analyzes structure and working principle of road accelerated loading test equipment, mainly researches hardware circuit design of control system. In order to realize real-time display of operational parameters, data communication between PLC and single chip microprocessor uses free port communication mode. The paper mainly introduces communication protocol and its realization method, and proposes partial key programs. Operation of road accelerated loading test equipment indicates the equipment has reliable operation, the control system has stable working, and the data communication system is simple and practical.

Sign in / Sign up

Export Citation Format

Share Document