Preparing and Applying of Flame Retardant Microcapsules Containing Magnesium Hydroxide

2013 ◽  
Vol 734-737 ◽  
pp. 2191-2194
Author(s):  
Li Li Wu ◽  
Yuan Lian ◽  
Dan Liu ◽  
Hua Zheng ◽  
Dian Wu Huang
Keyword(s):  
Thermal Stability ◽  
Flame Retardant ◽  
Magnesium Hydroxide ◽  
Low Density Polyethylene ◽  
Core Shell ◽  
Low Density ◽  
Melamine Resin ◽  
Shell Material ◽  
Elongation At Break ◽  
Good Thermal Stability

In this study, flame retardant microcapsules were synthesized using magnesium hydroxide as core materials, melamine resin as the shell material. The structure, diameters and thermal properties of prepared microcapsules were investigated by using FTIR, ELS, DSC and TGA. The effects of core/shell ratio on the properties of microcapsules were studied.Flame retardant materials of low-density polyethylene/magnesium hydroxide microcapsules were prepared.The tensile strength and elongation at break tests were performed to determine its mechanical property.Inflammability of the materials was also studied.The results showed the prepared magnesium hydroxide microcapsule shows good thermal stability and it has free compatibility with the polymer.The composites of HDPE/MH microcapsules have good performance．

scholarly journals Low-Temperature Mechanical Properties of High-Density and Low-Density Polyethylene and Their Blends

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1821
Author(s):  
Ildar I. Salakhov ◽  
Nadim M. Shaidullin ◽  
Anatoly E. Chalykh ◽  
Mikhail A. Matsko ◽  
Alexey V. Shapagin ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Low Temperature ◽  
Impact Strength ◽  
Relative Elongation ◽  
High Density ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Elongation At Break ◽  
Subzero Temperatures ◽  
Izod Impact

Low-temperature properties of high-density polyethylene (HDPE), low-density polyethylene (LDPE), linear low-density polyethylene (LLDPE), and their blends were studied. The analyzed low-temperature mechanical properties involve the deformation resistance and impact strength characteristics. HDPE is a bimodal ethylene/1-hexene copolymer; LDPE is a branched ethylene homopolymer containing short-chain branches of different length; LLDPE is a binary ethylene/1-butene copolymer and an ethylene/1-butene/1-hexene terpolymer. The samples of copolymers and their blends were studied by gel permeation chromatography (GPC), differential scanning calorimetry (DSC), 13С NMR spectroscopy, and dynamic mechanical analysis (DMA) using testing machines equipped with a cryochamber. It is proposed that such parameters as “relative elongation at break at −45 °C” and “Izod impact strength at −40 °C” are used instead of the ductile-to-brittle transition temperature to assess frost resistance properties because these parameters are more sensitive to deformation and impact at subzero temperatures for HDPE. LLDPE is shown to exhibit higher relative elongation at break at −45 °C and Izod impact strength at −20 ÷ 60 °C compared to those of LDPE. LLDPE terpolymer added to HDPE (at a content ≥ 25 wt.%) simultaneously increases flow properties and improves tensile properties of the blend at −45 °C. Changes in low-temperature properties as a function of molecular weight, MWD, crystallinity, and branch content were determined for HDPE, LLDPE, and their blends. The DMA data prove the resulting dependences. The reported findings allow one to understand and predict mechanical properties in the HDPE–LLDPE systems at subzero temperatures.

Study of using aluminum hypophosphite as a flame retardant for low-density polyethylene

2017 ◽  
Vol 41 (8) ◽  
pp. 983-992 ◽  
Author(s):  
Shenghui Tian ◽  
Hui He ◽  
Dekang Wang ◽  
Peng Yu ◽  
Yunchao Jia ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Aluminum Hypophosphite

Cable and Wire Application: Adoption of Nanomagnesium Hydroxide Blended with LDPE/EVA for Mechanical and Physical Properties

2013 ◽  
Vol 701 ◽  
pp. 202-206
Author(s):  
Ahmad Aroziki Abdul Aziz ◽  
Sakinah Mohd Alauddin ◽  
Ruzitah Mohd Salleh ◽  
Mohammed Iqbal Shueb
Keyword(s):  
Mechanical Properties ◽  
Physical Properties ◽  
Melt Flow Index ◽  
Low Density Polyethylene ◽  
Flow Index ◽  
Low Density ◽  
Elongation At Break ◽  
Mechanical And Physical Properties ◽  
Poly Ethylene ◽  
Loading Amount

Effect of nanoMagnesium Hydroxide (MH) nloading amount to the mechanical and physical properties of Low Density Polyethylene (LDPE)/ Poly (ethylene-co vinyl acetate)(EVA) nanocomposite has been described and investigated in this paper. The tensile strength results show that increased amount of nanofiller will decrease and deteriorate the mechanical properties. The elongation at break decreased continuously with increasing loading of nanofiller. Generally, mechanical properties become poorer as loading amount increase. Melt Flow Index values for physical properties also provide same trend as mechanical properties results. Increase filler amount reduced MFI values whereby increased resistance to the flow.

Non-isothermal crystallization and thermal degradation kinetics of MXene/linear low-density polyethylene nanocomposites

e-Polymers ◽  
2017 ◽  
Vol 17 (5) ◽  
pp. 373-381 ◽  
Author(s):  
Xinxin Cao ◽  
Mengqi Wu ◽  
Aiguo Zhou ◽  
You Wang ◽  
Xiaofang He ◽  
...  
Keyword(s):  
Activation Energy ◽  
Thermal Stability ◽  
Thermal Degradation ◽  
Isothermal Crystallization ◽  
Degradation Kinetics ◽  
Thermal Degradation Kinetics ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Linear Low Density Polyethylene ◽  
Kinetics Of

AbstractA novel two-dimensional material MXene was used to synthesize nanocomposites with linear low-density polyethylene (LLDPE). The influence of MXene on crystallization and thermal degradation kinetics of LLDPE was investigated. Non-isothermal crystallization kinetics was investigated by using differential scanning calorimetry (DSC). The experimental data was analyzed by Jeziorny theory and the Mo method. It is found that MXene acted as a nucleating agent during the non-isothermal crystallization process, and 2 wt% MXene incorporated in the nanocomposites could accelerate the crystallization rate. Findings from activation energy calculation for non-isothermal crystallization came to the same conclusion. Thermal gravity (TG) analysis of MXene/LLDPE nanocomposites was conducted at different heating rates, and the TG thermograms suggested the nanocomposites showed an improvement in thermal stability. Apparent activation energy (Ea) of thermal degradation was calculated by the Kissinger method, and Ea values of nanocomposites were higher than that of pure LLDPE. The existence of MXene seems to lead to better thermal stability in composites.

Physicomechanical properties of composites based on various types of polyethylene and aluminum

2020 ◽  
Vol 10 ◽  
pp. 48-55
Author(s):  
H. V. Allakhverdiyeva ◽  
◽  
N. T. Kakhramanov ◽  
I. I. Ismayilov ◽  
◽  
...  
Keyword(s):  
Tensile Stress ◽  
High Density Polyethylene ◽  
Ultimate Tensile Stress ◽  
High Density ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Aluminum Particles ◽  
Elongation At Break ◽  
Elastic Module ◽  
Properties Of Composites

The paper presents the results of a study of the effect of aluminum content on the physic-mechanical properties of composites based on high density polyethylene and low density polyethylene. The properties of metal-filled composites, such as ultimate tensile stress, elongation at break, elastic module, melt flow rate, and heat resistance, were studied. According to the data obtained, the loading of aluminum into the composition of low density polyethylene contributes to a monotonic increase in the ultimate tensile stress and the elastic module. When aluminum is loading into the composition of high density polyethylene, on the contrary, a natural decrease in the ultimate tensile stress and elongation at break of the composites is observed. It is shown that when using a compatibilizer, which is polyethylene modified with maleic anhydride, a significant increase in the ultimate tensile stress of high-density polyethylene composites is observed. A schematic representation of the structure of composites with an interpretation of the probable mechanism of hardening of the material in the presence of a compatibilizer is given. It is shown that the crystallinity of the initial polyethylene has a significant effect on the hardening effect of composites. Electron microscopic micrographs of the structure of a filled composite without and with compatibilizer are given. A comparative assessment shows that in the presence of a compatibilizer, aluminum particles are in the bulk of the polymer matrix, i.e. are not in an isolated state. It is assumed that HDPE macrochains free of maleic anhydride (MA) are involved in the formation of crystalline formations, and small sections of macrosegments containing polar groups of MA are concentrated mainly in amorphous regions and in defects in crystalline structures in the form of passage chains. The concentration of PEMA macrosegments containing MA in the narrow amorphous space of HDPE favorably affects the increase in the adhesive forces of interaction on the surface of aluminum particles, which affects the preservation of the ultimate tensile stress at a relatively high level over a wide range of aluminum concentrations.

Sign in / Sign up

Export Citation Format

Share Document