Experiment Study on the Effects of the Dehydration Methods on the Micropore Structure Characteristics of Bentonite

2013 ◽  
Vol 785-786 ◽  
pp. 248-252 ◽  
Author(s):  
Xiao Qing Yan ◽  
Ying Guang Fang ◽  
Hai Hong Mo ◽  
Ping Zhang

As a natural nanomaterial, the bentonite is widely used in industry and engineering, and it is used in the anti-seepage (infiltration) project in civil engineer because of its low permeability. The micro-pore structure characteristics of the bentonite with the different dehydration methods are measured by Mercury Intrusion Porosimetry (MIP) in this text. Then the effects of the dehydration methods on the micro-pore structure characteristics of bentonite are analysed and the detailed reasons of the test errors are given. The results of the research have certain referential value for the application of the bentonite in civil engineering and play a guiding role on how to reduce the errors and to improve the authenticity and the reliability of the test.

2016 ◽  
Vol 27 (4) ◽  
pp. 670-676 ◽  
Author(s):  
Na Zhang ◽  
Manchao He ◽  
Bo Zhang ◽  
Fengchao Qiao ◽  
Hailong Sheng ◽  
...  

2010 ◽  
Vol 150-151 ◽  
pp. 825-828
Author(s):  
Yan Wang ◽  
Di Tao Niu ◽  
Yuan Yao Miao ◽  
Nai Qi Jiao

The concrete microstructure can affect its macroscopic properties, such as the strength and durability, etc. Based on the experimental study of cube compressive strength of steel fibre reinforced concrete, splitting tensile strength, flexural strength, and using by mercury intrusion method to test the pore structure of steel fibrous, this paper analyzes the influence of fibre on concrete pore structure. And then on mechanical properties of concrete from microcosmic perspective.


2018 ◽  
Vol 54 (4) ◽  
pp. 476-483
Author(s):  
Luo Hao-ran ◽  
Huang Xu-ri ◽  
Yin cheng ◽  
Tao Zheng-wu

2019 ◽  
Vol 7 (2) ◽  
pp. T547-T563 ◽  
Author(s):  
Jiyuan Wang ◽  
Shaobin Guo

To systematically study the whole-aperture pore-structure characteristics of the marine-continental transitional shale facies in the Upper Palaeozoic Taiyuan and Shanxi Formations of the Qinshui Basin, we have collected a total of 11 samples for high-pressure mercury intrusion, low-pressure gas adsorption ([Formula: see text] and [Formula: see text]), nuclear magnetic resonance (NMR), and field-emission scanning electron microscopy with argon-ion polishing experiments to determine the pore morphology and distribution characteristics of shale samples in detail and to perform quantitative analyses. Then compared the pore-development characteristics of the Taiyuan Formation samples with those of the Shanxi Formation to determine which is preferable. The experimental results indicate that the shale samples of the Qinshui Basin mainly develop three types of pores: organic pores, intergranular pores, and microfractures. High-pressure mercury intrusion and gas-adsorption experiments indicate that the pore-size distributions exhibit multiple peaks. The samples contained varying proportions of macropores, mesopores, and micropores, among which the former two are dominant, accounting for approximately 85% of the total pore volume, whereas micropores account for only 15%. However, mesopores and micropores dominate the specific surface area; between them, the micropores are much more prevalent, accounting for more than 99% of the total specific surface area. Macropores contribute less than 1% of the specific surface area and therefore can be neglected. The pore morphology resembles the slit type parallel platy pores with a ballpoint pen structure. The NMR [Formula: see text] spectra have multiple-peak values. In addition, the large difference between the curved areas before and after centrifugation indicates that the samples contain a large proportion of mesopores and macropores, which is consistent with the results presented above. The results demonstrate that the development of pores in the Taiyuan Formation is better than that in the Shanxi Formation.


Sign in / Sign up

Export Citation Format

Share Document