The Design of Jacquard Fabric with Optical Fiber for Effect of Leaves Falling

2013 ◽  
Vol 821-822 ◽  
pp. 283-286
Author(s):  
Rui Peng Jin ◽  
Zi Min Jin ◽  
Xue Qin Wang ◽  
Bin Yang
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Light Sources ◽  
Textile Fibers ◽  
Dynamic Display ◽  
Polymer Optical Fibers

The optical jacquard decorative fabric which had patterns in dynamic display was woven with side-emitting polymer optical fibers (POF) and common textile fibers. The side-emitting POFs were designed as surface wefts in luminous parts of the fabric, and the POFs were back in other parts. These POFs were divided into different groups according to luminous sequence. Then the POFs were connected with light sources and a specific circuit. Finally the patterns of fabric could display like animation. When POFs didnt emit light, the fabric kept the effect of traditional jacquard fabric.

Flexible porphyrin doped polymer optical fibers for rapid and remote detection of trace DNT vapor

The Analyst ◽  
2020 ◽  
Vol 145 (15) ◽  
pp. 5307-5313
Author(s):  
Huan Lin ◽  
Xin Cheng ◽  
Ming-Jie Yin ◽  
Zhouzhou Bao ◽  
Xunbin Wei ◽  
...  
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Remote Detection ◽  
Polymer Optical Fiber ◽  
Highly Sensitive ◽  
Polymer Optical Fibers ◽  
Doped Polymer

A flexible porphyrin doped polymer optical fiber was developed for fast and highly sensitive monitoring of DNT vapors.

scholarly journals Vortex Polymer Optical Fiber with 64 Stable OAM States

Polymers ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 2776
Author(s):  
José A. Borda-Hernández ◽  
Claudia M. Serpa-Imbett ◽  
Hugo E. Hernandez Figueroa
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Communication Systems ◽  
Low Cost ◽  
Higher Order ◽  
Coupling Coefficients ◽  
Polymer Optical Fiber ◽  
Optical Polymer ◽  
Polymer Optical Fibers ◽  
Low Dispersion

This research introduces a numerical design of an air-core vortex polymer optical fiber in cyclic transparent optical polymer (CYTOP) that propagates 32 orbital angular momentum (OAM) modes, i.e., it may support up to 64 stable OAM-states considering left- and right-handed circular polarizations. This fiber seeks to be an alternative to increase the capacity of short-range optical communication systems multiplexed by modes, in agreement with the high demand of low-cost, insensitive-to-bending and easy-to-handle fibers similar to others optical fibers fabricated in polymers. This novel fiber possesses unique characteristics: a diameter of 50 µm that would allow a high mechanical compatibility with commercially available polymer optical fibers, a difference of effective index between neighbor OAM modes of around 10−4 over a bandwidth from 1 to 1.6 µm, propagation losses of approximately 15 × 10−3 dB/m for all OAM modes, and a very low dispersion for OAM higher order modes (±l = 16) of up to +2.5 ps/km-nm compared with OAM lower order modes at a telecom wavelength of 1.3 µm, in which the CYTOP exhibits a minimal attenuation. The spectra of mutual coupling coefficients between modes are computed considering small bends of up to 3 cm of radius and slight ellipticity in the ring of up to 5%. Results show lower-charge weights for higher order OAM modes.

scholarly journals E-Knitted Textile with Polymer Optical Fibers for Friction and Pressure Monitoring in Socks

Sensors ◽  
2019 ◽  
Vol 19 (13) ◽  
pp. 3011 ◽  
Author(s):  
Claire Guignier ◽  
Brigitte Camillieri ◽  
Michel Schmid ◽  
René M. Rossi ◽  
Marie-Ange Bueno
Keyword(s):  
Mechanical Properties ◽  
Optical Fiber ◽  
Optical Fibers ◽  
Knitted Fabric ◽  
Bending Rigidity ◽  
Pressure Monitoring ◽  
Polymer Optical Fiber ◽  
Bending Radius ◽  
Polymer Optical Fibers ◽  
Knitted Structure

The objective of this paper is to study the ability of polymer optical fiber (POF) to be inserted in a knitted fabric and to measure both pressure and friction when walking. Firstly, POF, marketed and in development, have been compared in terms of the required mechanical properties for the insertion of the fiber directly into a knitted fabric on an industrial scale, i.e. elongation, bending rigidity, and minimum bending radius before plastic deformation. Secondly, the chosen optical fiber was inserted inside several types of knitted fabric and was shown to be sensitive to friction and compression. The knitted structure with the highest sensitivity has been chosen for sock prototype manufacturing. Finally, a feasibility study with an instrumented sock showed that it is possible to detect the different phases of walking in terms of compression and friction.

scholarly journals Theoretical Investigation of Oxazine 170 Perchlorate Doped Polymeric Optical Fiber Amplifier

2017 ◽  
Vol 2017 ◽  
pp. 1-6
Author(s):  
Piotr Miluski ◽  
Marcin Kochanowicz ◽  
Jacek Żmojda ◽  
Dominik Dorosz
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Organic Dyes ◽  
Fiber Amplifier ◽  
Optical Amplifier ◽  
Optical Signal ◽  
Light Sources ◽  
Optical Fiber Amplifier ◽  
Waveguiding Structure ◽  
Polymeric Optical Fibers

Optical signal amplification in the waveguiding structure of optical fibers can be used for optical telecommunication systems and new light sources constructions. Organic dyes doped materials are interesting for new applications in polymeric optical fibers technology due to their benefits (efficient fluorescence, high absorption cross section, and easy processing). This article presents a numerical simulation of gain in poly(methyl methacrylate) optical fiber doped by Oxazine 170 Perchlorate. The calculated gain characteristic for the used dye molar concentration (0.2·10-6–1.4·10-6) and pump power (1–10 kW) is presented. The fabricated fluorescent polymeric optical fiber is also shown. The presented analysis can be used for optical amplifier construction based on dye-doped polymeric optical fiber (POF).

scholarly journals Novel method for manufacturing optical fiber: extrusion and drawing of microstructured polymer optical fibers from a 3D printer

2018 ◽  
Vol 26 (24) ◽  
pp. 32007 ◽  
Author(s):  
Wanvisa Talataisong ◽  
Rand Ismaeel ◽  
Seyed Reza Sandoghchi ◽  
Teerapat Rutirawut ◽  
Glenn Topley ◽  
...  
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
3D Printer ◽  
Novel Method ◽  
Polymer Optical Fibers

scholarly journals Reflective Properties of a Polymer Micro-Transducer for an Optical Fiber Refractive Index Sensor

Sensors ◽  
2020 ◽  
Vol 20 (23) ◽  
pp. 6964
Author(s):  
Paweł Marć ◽  
Monika Żuchowska ◽  
Leszek R. Jaroszewicz
Keyword(s):  
Refractive Index ◽  
Optical Fiber ◽  
Optical Fibers ◽  
Fiber Type ◽  
Optical Fiber Sensor ◽  
Refractive Index Sensor ◽  
Light Sources ◽  
New Class ◽  
Multi Mode ◽  
Selection Of

A polymer microtip manufactured at the end of a multi-mode optical fiber by using the photopolymerization process offers good reflective properties, therefore, it is applicable as an optical fiber sensor micro-transducer. The reflective properties of this microelement depend on the monomer mixture used, optical fiber type, and light source initiating polymerization. Experimental results have shown that a proper selection of these parameters has allowed the design of a new class of sensing structure which is sensitive to the refractive index (RI) changes of a liquid medium surrounding the microtip. An optical backscatter reflectometer was applied to test a group of micro-transducers. They were manufactured from two monomer mixtures on three different types of multi-mode optical fibers. They were polymerized by means of three optical light sources. Selected micro-transducers with optimal geometries were immersed in reference liquids with a known RI within the range of 1.3–1.7. For a few sensors, the linear dependences of return loss and RI have been found. The highest sensitivity was of around 208 dB/RIU with dynamic 32 dB within the range of 1.35–1.48. Sensing characteristics have minima close to RI of a polymer microelement, therefore, changing its RI can give the possibility to tune sensing properties of this type of sensor.

Ammonia Detection by Dye Immobilized Microstructured Optical Fiber

2011 ◽  
Vol 255-260 ◽  
pp. 2131-2135 ◽  
Author(s):  
Li Rong Peng ◽  
Xing Hua Yang ◽  
Li Bo Yuan ◽  
En Ming Zhao ◽  
Le Li ◽  
...  
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Optical Fiber Sensor ◽  
Gaseous Ammonia ◽  
Polymer Optical Fiber ◽  
Microstructured Optical Fiber ◽  
Response Range ◽  
Ammonia Detection ◽  
Polymer Optical Fibers ◽  
Minor Reaction

An optical ammonia probe was fabricated based on Microstructured Polymer Optical Fiber (MPOFs) modified by eosin doped silica gel films.The structure of this probe was based on microstructured polymer optical fibers with microholes and these microholes could be used as the substrate of sensing materials and minor reaction pools. The sensing properties of the optical fiber sensor to gaseous ammonia were investigated at room temperature. The sensing probe showed different fluorescence intensity at 576 nm to different concentrations of trace ammonia in carrier gas of nitrogen. The response range was 20-350 ppm, with short response time within 600 ms.

Study on Static and Dynamic Pattern Transformation Glowing Optic Fiber Scene-Like Jacquard Wall-Mounted Fabrics

2014 ◽  
Vol 633-634 ◽  
pp. 455-459
Author(s):  
Jing Na Xu ◽  
Zi Min Jin ◽  
Yi Na Qi ◽  
Zhong Wen Sun ◽  
Xue Qin Wang
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Electronic Circuit ◽  
Optic Fiber ◽  
Dynamic Design ◽  
Fabric Structure ◽  
Dynamic Display ◽  
Paper Clip ◽  
Main Paper ◽  
Pattern Transformation

In order to make the jacquard fiber hanging fabric to achieve static and dynamic design gradually transform shining shows at the same time, we adopt the interweaves of optical fibers and common yams. By designing six double weft fabric structure of four groups of optical fibers and two groups of common yarns, some functions like “image overlying”, “colour replacing” and “protecting colour” in weave CAD are used in order to overlie the drafting of a static shining pattern formed with 2 sets of optical fiber, a transform shining pattern composed of 2 sets of optical fiber and a scene-like decorative pattern formed with a set of conventional weft. Then notation file is prepared by designing the weft row, main paper clip, assistant needle and sample card. Next, use jacquard weaving machine to make 6 double weft optical fiber jacquard fabric. Finally, by the utilization of the light of LED , the design of electronic circuit,to get a pattern can be controlled shining, static and dynamic display of optical fiber as wall-mounted scene jacquard fabric.

scholarly journals Determination of the optimal extrusion temperature of the PMMA optical fibers

2019 ◽  
Vol 11 (1) ◽  
pp. 7
Author(s):  
Malwina Julita Niedźwiedź ◽  
Małgorzata Gil ◽  
Mateusz Gargol ◽  
Wiesław Marian Podkościelny ◽  
Paweł Mergo
Keyword(s):  
Optical Fiber ◽  
Methyl Methacrylate ◽  
Optical Fibers ◽  
Data Communication ◽  
Extrusion Temperature ◽  
Polymer Optical Fiber ◽  
Poly Methyl Methacrylate ◽  
Practical Applications ◽  
Polymer Optical Fibers

The aim of this work was to determine optimal extrusion temperature for polymer optical fibers. For preliminary studies poly(methyl methacrylate) (PMMA) granulate was used. Samples of commercially available PMMA were subjected to four different temperatures in which were kept in oven for three different period of time. To examine the changes in the chemical structure of the polymer, an ATR-FT-IR (Attenuation Total Reflection Fourier Transform Infrared Spectroscopy) was chosen. Full Text: PDF ReferencesK. Peters, "Polymer optical fiber sensors—a review", Smart Mater. Struct. 20, 013002 (2011) CrossRef O. Ziemann, J. Krauser, P.E. Zamzow, W. Daum, "POF Polymer Optical Fibers for Data Communication" (New York, Springer-Verlag Berlin Heidelberg 2002). CrossRef M.A. van Eijkelenborg, M.C.J. Large, A. Argyros, J. Zagari, S. Manos, N.A. Issa, I. Bassett, S. Fleming, R.C. McPhedran, C. Martijn de Sterke, N.A.P. Nicorovici, "Microstructured polymer optical fibre", Opt Express 9, 319 (2001). CrossRef O. Çetinkaya, G. Wojcik, P. Mergo, "Decreasing diameter fluctuation of polymer optical fiber with optimized drawing conditions", Mater Res Express 5, 1 (2018). CrossRef P. Mergo, M. Gil, K. Skorupski, J. Klimek, G. Wójcik, J. Pędzisz, J. Kopec, K. Poruraj, L. Czyzewska, A. Walewski, A. Gorgol, "Low loss poly(methyl methacrylate) useful in polymer optical fibres technology", Phot. Lett. Poland, 5, 170 (2013). CrossRef J. Grdadolnik, "ATR-FTIR Spectroscopy: Its advantages and limitations", Acta Chim Slov. 49, 631 (2002). DirectLink P. Borowski, S. Pasieczna-Patkowska, M. Barczak, K. Pilorz, "Theoretical Determination of the Infrared Spectra of Amorphous Polymers", J Phys Chem A 116, 7424 (2012). CrossRef G. Socrates, "Infrared and Raman Characteristic Group Frequencies Tables and Charts" Third Edition (Baffins Lane Chichester, John Wiley & Sons Ltd 2001). DirectLink W. Schnabel, Polymer Degradation Principles and Practical Applications (Berlin, Akademie-Verlag 1981). DirectLink

scholarly journals Characterization of Hand Gestures by a Smartphone-Based Optical Fiber Force Myography Sensor

2020 ◽  
Vol 2 (1) ◽  
pp. 46
Author(s):  
Matheus S. Rodrigues ◽  
Pedro M. Lazari ◽  
Marco C. P. Soares ◽  
Eric Fujiwara
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Low Cost ◽  
Optical Fiber Sensor ◽  
Hand Gestures ◽  
Optical Signals ◽  
Integrated Optical ◽  
Reliable Performance ◽  
Force Myography ◽  
Polymer Optical Fibers

In this paper, a smartphone-integrated, optical fiber sensor based on the force myography technique (FMG), which characterizes the stimuli of the forearm muscles in terms of mechanical pressures, was proposed for the identification of hand gestures. The device’s flashlight excites a pair of polymer optical fibers and the output signals are detected by the camera. The light intensity is modulated through wearable, force-driven microbending transducers placed in the forearm and the acquired optical signals are processed by an algorithm based on decision trees and residual error. The sensor provided a hit rate of 87% regarding four postures, yielding reliable performance with a simple, portable, and low-cost setup embedded on a smartphone.

Sign in / Sign up

Export Citation Format

Share Document