Preparation of Superhydrophobic Surface on Copper Foils by a Facile Method

2013 ◽  
Vol 834-836 ◽  
pp. 42-45
Author(s):  
Zhi Qing Yuan ◽  
Xian Wang ◽  
Ji Ping Bing ◽  
Meng Lei Wang ◽  
Juan Huang
Keyword(s):  
Contact Angle ◽  
Superhydrophobic Surface ◽  
Solution Concentration ◽  
Copper Surface ◽  
Ethanol Solution ◽  
Superhydrophobic Surfaces ◽  
Sliding Angle ◽  
Water Contact ◽  
Copper Foils ◽  
Immersing Method

In the paper, we prepared superhydrophobic surfaces on copper foils via a facile solution-immersing method. The influence of experiment conditions, such as solution concentration, immersing time and temperature, on the surface structure is investigated in detail. When the concentration of stearic acid-ethanol solution, the immersing time and the temperature are 2 g/L, 120 min and 40°,respectively, the resulting copper surface possesses great superhydrophobicity with a water contact angle of up to 159° and a sliding angle of only 3°.

scholarly journals Fabrication of a Low Adhesive Superhydrophobic Surface on Ti6Al4V Alloys Using TiO2/Ni Composite Electrodeposition

Micromachines ◽  
2019 ◽  
Vol 10 (2) ◽  
pp. 121 ◽  
Author(s):  
Jianbing Meng ◽  
Xiaojuan Dong ◽  
Yugang Zhao ◽  
Rufeng Xu ◽  
Xue Bai ◽  
...  
Keyword(s):  
Contact Angle ◽  
Wear Resistance ◽  
Superhydrophobic Surface ◽  
Ph Value ◽  
Chemical Compositions ◽  
Sliding Angle ◽  
Water Contact ◽  
Angle Measurements ◽  
Surface Morphologies ◽  
Composite Electrodeposition

A superhydrophobic surface with low adhesion and good wear resistance was fabricated on Ti6Al4V substrates via TiO2/Ni composite electrodeposition, and subsequently modified with a fluoroalkylsilane (FAS) film. Scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and optical contact angle measurements were used to characterize the surface morphologies, chemical compositions, and surface wettability. The superhydrophobicity of the as-prepared surface results from the fabrication of a hierarchical structure and the assembly of low-surface energy fluorinated components. The as-prepared surface had a water contact angle as high as 162.6° and a sliding angle close to 1.8°. Scratch and abrasion tests showed that the superhydrophobic coating provided a superior wear resistance and stable mechanical abrasion protection. In addition, the influence of processing conditions, such as working voltage, deposited time, pH value, and TiO2 concentration, was also investigated.

A Two-Step Method to Prepare Stable Superhydrophobic Surface on Steel Substrates

2012 ◽  
Vol 463-464 ◽  
pp. 349-353 ◽  
Author(s):  
Feng Guo ◽  
Xun Jia Su ◽  
Gen Liang Hou ◽  
Zhao Hui Liu ◽  
Hai Peng Jia
Keyword(s):  
Contact Angle ◽  
Superhydrophobic Surface ◽  
Low Cost ◽  
Superhydrophobic Surfaces ◽  
Step Method ◽  
Water Contact ◽  
Lotus Leaf ◽  
Nanoscale Particles ◽  
Steel Substrates

Superhydrophobic surfaces have been a hot topic during the last decade owing to their great potential in widely application. In this work, we report on a facile and low-cost two-step method to fabricate superhydrophobic surface on steel substrates. The as-obtained surface shows an interesting hierarchical structure composed of microscale flowerlike cluster and nanoscale particles, which is similar to that of a lotus leaf. After further modification with stearic acid, the resultant surface exhibits remarkable superhydrophobic properties. The water contact angle is as high as 155°. Moreover, the superhydrophobic properties are long-term stable.

scholarly journals Robust Superhydrophobic Surface on Polypropylene with Thick Hydrophobic Silica Nanoparticle-Coated Films Prepared by Facile Compression Molding

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3155
Author(s):  
Oyunchimeg Erdene-Ochir ◽  
Doo-Man Chun
Keyword(s):  
Contact Angle ◽  
Surface Energy ◽  
Alkaline Medium ◽  
Superhydrophobic Surface ◽  
Thick Layer ◽  
Scratch Test ◽  
Superhydrophobic Surfaces ◽  
Sliding Angle ◽  
Hydrophobic Silica ◽  
Low Surface Energy

Superhydrophobic surfaces have been extensively studied for their unique interfacial interaction between water and the surface, and they can be used for self-cleaning, drag reduction, anti-icing, and other applications. To make the superhydrophobic surfaces, nano/microscale structures and a low surface energy should be realized. The development of a durable superhydrophobic surface was hindered by the vulnerability of the surface to mechanical contact. To improve the robustness of the superhydrophobic surface toward mechanical damage, the hydrophobic polypropylene (PP) surface was coated with a thick layer of hydrophobic silica nanoparticles (SNPs) using a simple compression molding process. The thick layer consists of SNPs and PP, and the roles of SNPs and PP are nano/microscale structures with a low surface energy and binder for nanoparticles, respectively. This revealed improvement in the superhydrophobic tendency, with an apparent contact angle of about 170° and a sliding angle of less than 5°. The morphology and the corresponding elemental analysis of the PP/SNPs coated films were investigated using field emission scanning electron microscopy and energy-dispersive spectrometry. The mechanical durability of the superhydrophobic surface was evaluated by the scotch tape test and scratch test with sandpaper. The coated films with SNPs showed the superhydrophobic behavior after 25 tape tests. In addition, the coated films with SNPs showed a contact angle greater than 150° and a sliding angle less than 10° after a 100-cm scratch test with 1000 grit sandpaper, under a weight of 500 g, on an area of 40 × 40 mm2. The chemical stability of PP/SNPs coated films was also investigated in acidic, neutral, and alkaline medium solutions. The films showed good stability under the acidic and neutral medium solutions even after 24 h, but an alkaline medium could damage the surface. The obtained results demonstrated the robustness of the superhydrophobic coating with SNPs.

scholarly journals Fabrication of Self-Cleaning Superhydrophobic Surfaces with Improved Corrosion Resistance on 6061 Aluminum Alloys

Micromachines ◽  
2020 ◽  
Vol 11 (2) ◽  
pp. 159 ◽  
Author(s):  
Xiaojuan Dong ◽  
Jianbing Meng ◽  
Yizhong Hu ◽  
Xiuting Wei ◽  
Xiaosheng Luan ◽  
...  
Keyword(s):  
Contact Angle ◽  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Aluminum Alloys ◽  
Superhydrophobic Surface ◽  
Al Alloy ◽  
Alloy Sample ◽  
Sliding Angle ◽  
Water Contact ◽  
Self Cleaning

Aluminum alloys are widely used, but they are prone to contamination or damage under harsh working environments. In this paper, a self-cleaning superhydrophobic aluminum alloy surface with good corrosion resistance was successfully fabricated via the combination of sand peening and electrochemical oxidation, and it was subsequently covered with a fluoroalkylsilane (FAS) film. The surface morphology, surface wettability, and corrosion resistance were investigated using a scanning electron microscope (SEM), an optical contact angle measurement, and an electrochemical workstation. The results show that binary rough structures and an FAS film with a low surface energy on the Al alloy surfaces confer good superhydrophobicity with a water contact angle of 167.5 ± 1.1° and a sliding angle of 2.5 ± 0.7°. Meanwhile, the potentiodynamic polarization curve shows that the corrosion potential has a positively shifted trend, and the corrosion current density decreases by three orders of magnitude compared with that of the original aluminum alloy sample. In addition, the chemical stability of the as-prepared superhydrophobic surface was evaluated by dripping test using solutions with different pH values for different immersion time. It indicates that the superhydrophobic surface could provide long-term corrosion protection for aluminum alloys. Consequently, the as-prepared superhydrophobic surface has excellent contamination resistance and self-cleaning efficacy, which are important for practical applications.

Fabrication and Characterization of CuO Micro-Dimensional Structures for Superhydrophobic Surface

2014 ◽  
Vol 936 ◽  
pp. 233-237
Author(s):  
You Hua Fan ◽  
Ze Jun Chen ◽  
La Yun Deng ◽  
Hong Chen
Keyword(s):  
Contact Angle ◽  
Superhydrophobic Surface ◽  
Morphological Study ◽  
Copper Substrate ◽  
Sliding Angle ◽  
Water Contact ◽  
Synthesis Conditions ◽  
Superhydrophobic Property ◽  
Fabrication And Characterization

A superhydrophobic copper oxygen (CuO) surface with hierarchical micro- and nanostructure was obtained by hydrothermally synthesized. The CuO surface was endowed with superhydrophobic property by modifying with stearic acid, which was referred to the STA-modified CuO film. The surface morphological study showed that different structures, such as petal-shaped, bulk-shaped, carambola-shaped CuO and cauliflower-shaped particles distributed on the copper substrate under the different synthesis conditions. The water contact angle and sliding angle of the as-prepared CuO surface were 157 ± 2.3º and 3º, respectively.

Preparation and Characterization of Nickel Oxide-Based Superhydrophobic Surface

2012 ◽  
Vol 557-559 ◽  
pp. 1807-1810 ◽  
Author(s):  
Zhi Qing Yuan ◽  
Xi Hai Hao ◽  
Ji Ping Bin ◽  
Xian Wang ◽  
Hong Chen
Keyword(s):  
Contact Angle ◽  
Aqueous Solutions ◽  
Nickel Oxide ◽  
Superhydrophobic Surface ◽  
Water Surface ◽  
Pure Water ◽  
Sliding Angle ◽  
Water Contact ◽  
Superhydrophobic Property

A superhydrophobic nickel oxide (NiO) surface with hierarchical micro- and nanostructures was obtained by a novel and facile method. The water contact angle and sliding angle of the superhydrophobic NiO surface were 156±1.9º and 3º, respectively. The superhydrophobic NiO surface made the substrate float on the water surface and showed high buoyancy. Execept for pure water, the superhydrophobicity of the superhydrophobic NiO surface remained unchanged when contacting with salt aqueous solutions. After being stored in ambient environment for 8 months, the superhydrophobic property remained constant, and no contamination was observed on the superhydrophobic NiO surface.

scholarly journals Superhydrophobic textile: treatment in aqueous solutions of aluminum salts

2021 ◽  
Author(s):  
Eterina Endiiarova ◽  
Artem Osipov ◽  
Sergey Alexandrov ◽  
Alexander Shakhmin
Keyword(s):  
Contact Angle ◽  
Photoelectron Spectroscopy ◽  
Superhydrophobic Surface ◽  
Hydrophobic Surface ◽  
Solution Concentration ◽  
Textile Processing ◽  
X Ray ◽  
Textile Materials ◽  
Aluminum Salts ◽  
Processing Treatment

Abstract Textile is currently a promising material. Obtaining hydrophobic surfaces on textiles significantly increases its value when used in various fields. In this work we carried out experiments on textile processing. Treatment of textile materials in solutions containing aluminum allows to obtain a superhydrophobic surface. KAl(SO4) and AlCl3 solutions were used. It was found that treatment in AlCl3 solution is more effective and allows to achieve a hydrophobic surface on textile with a contact angle of more than 150º. The hydrophobic surface retained its properties even after 30 days. Textile samples were investigated using X-Ray photoelectron spectroscopy (XPS). The X-Ray photoelectron spectroscopy results showed hydrophobicity in the treatment of textile materials is ensured by the formation of aluminum oxide on the surface. The dependence of the coarse calico contact angle on the AlCl3 solution concentration is determined. which demonstrates that when the concentration of AlCl3 solution increases (within the limits of variation considered), the contact angle also increases.

scholarly journals A Simple Method to Create Superhydrophobic Aluminium Surfaces

2012 ◽  
Vol 706-709 ◽  
pp. 2874-2879 ◽  
Author(s):  
R. Jafari ◽  
Masoud Farzaneh
Keyword(s):  
Contact Angle ◽  
Stearic Acid ◽  
Synergistic Effects ◽  
Low Cost ◽  
Contact Angle Hysteresis ◽  
Spray Coating ◽  
Superhydrophobic Surfaces ◽  
Water Contact ◽  
Simple Method ◽  
Static Contact

Superhydrophobic surfaces were prepared using a very simple and low-cost method by spray coating. A high static water contact angle of about 154° was obtained by deposition of stearic acid on an aluminium alloy. However, this coating demonstrated a high contact angle hysteresis (~ 30º). On the other hand, superhydrophobic surfaces with a static contact angle of about 162º and 158º, and a low contact angle hysteresis of about 3º and 5º were respectively obtained by incorporating nanoparticles of SiO2and CaCO3in stearic acid. The excellent resulting hydrophobicity is attributed to the synergistic effects of micro/nanoroughness and low surface energy. A study of the wettability of these surfaces at temperatures ranging from 20 to-10 °C showed that the superhydrophobic surface becomes rather hydrophobic at supercooled temperatures.

scholarly journals Preparation of Superhydrophobic Steel Surfaces with Chemical Stability and Corrosion

Coatings ◽  
2019 ◽  
Vol 9 (6) ◽  
pp. 398 ◽  
Author(s):  
Chongwei Du ◽  
Xiaoyan He ◽  
Feng Tian ◽  
Xiuqin Bai ◽  
Chengqing Yuan
Keyword(s):  
Contact Angle ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Chemical Stability ◽  
Superhydrophobic Surface ◽  
Contact Angle Hysteresis ◽  
Water Contact ◽  
Simple Method ◽  
Q235 Carbon Steel ◽  
Steel Surfaces

Corrosion seriously limits the long-term application of Q235 carbon steel. Herein, a simple fabrication method was used to fabricate superhydrophobic surfaces on Q235 carbon steel for anticorrosion application. The combination of structure and the grafted low-surface-energy material contributed to the formation of superhydrophobic steel surfaces, which exhibited a water contact angle of 161.6° and a contact angle hysteresis of 0.8°. Meanwhile, the as-prepared superhydrophobic surface showed repellent toward different solutions with pH ranging from 1 to 14, presenting excellent chemical stability. Moreover, the acid corrosive liquid (HCl solution with pH of 1) maintained sphere-like shape on the as-prepared superhydrophobic surface at room temperature, indicating superior corrosion resistance. This work provides a simple method to fabricate superhydrophobic steel surfaces with chemical stability and corrosion resistance.

Sign in / Sign up

Export Citation Format

Share Document