Preliminary Study on the Removal of Hexavalent Chromium in Wastewater with Reduction of Sulfur Dioxide

2013 ◽  
Vol 864-867 ◽  
pp. 1699-1703
Author(s):  
Ji Ming Wu ◽  
Sheng Gao Cheng
Keyword(s):  
Reaction Time ◽  
Sulfur Dioxide ◽  
Hexavalent Chromium ◽  
Reduction Reaction ◽  
High Concentration ◽  
Reaction Conditions ◽  
Ph Values ◽  
Different Temperatures ◽  
Preliminary Study ◽  
High Concentrations

The paper focused on a self-developed methodology through using sulfur dioxide to deal with high concentration of chromium-containing wastewater. It studied the effects of different pH values, different reaction time, different temperatures and different amounts of sulfur with sulfur dioxide reduction reaction on the chromium-containing wastewater. The results showed that: when the reaction conditions were controlled as follows: the pH values ranged from 2 to 4, the reaction temperature was controlled 40~60°C, the amount of sulfur in theoretical was 1.2 times and the reaction time was 40 min, the hexavalent chromium in the high concentrations of chromium-containing wastewater could be effectively removed.

A Novel Method for the Treatment of Wastewater Containing High Concentration of Copper and Arsenic

2011 ◽  
Vol 396-398 ◽  
pp. 631-638
Author(s):  
Bao Zhang ◽  
Jia Feng Zhang
Keyword(s):  
Reaction Time ◽  
Sulfur Dioxide ◽  
Flow Velocity ◽  
Water Flow ◽  
Material Flow ◽  
Reduction Process ◽  
High Concentration ◽  
Water Flow Velocity ◽  
Separation Ratio ◽  
Diffusion Dialysis

Arsenic contamination of water and associated health risks have been reported in many regions of China. Leaching of arsenic from industrial wastewater into groundwater may cause severe contamination, which requires proper treatment before its emission. Therefore, sulfur dioxide reduction combined diffusion dialysis method is adopted to dispose the wastewater containing high concentration of copper and arsenic. Effects of the sulfur dioxide reduction process of the flow of sulfur dioxide, reaction time, reaction temperature and stirring speed and the diffusion dialysis process of the influent acidity, water flow velocity and material flow velocity on the ratio of separation of arsenic and copper were studied in this paper. The results show that on the conditions of the flow of sulfur dioxide of 3 kg/h, reaction time of 1h, at room temperature, stirring speed of 800 r/min and influent acidity of 5 g/L, water flow velocity of 400 ml/h, material flow velocity of 400 ml/h, the integrated effect of separation is best. The separation ratio of copper reaches 94.71 % and that of arsenic is up to 95.63 %.

The Toxicity of Castor Beans and its Treatment with Doxycycline in Local Rabbits

2018 ◽  
Vol 9 (2) ◽  
Author(s):  
Nael Mohammed Sarheed ◽  
Osamah Faisal Kokas ◽  
Doaa Abd Alabas Muhammed Ridh
Keyword(s):  
Castor Bean ◽  
The Body ◽  
Control Group ◽  
High Concentration ◽  
Biochemical Tests ◽  
Doxycycline Treatment ◽  
High Concentrations ◽  
Physiological Tests ◽  
Animal House ◽  
Physiological And Biochemical

The plant of castor is widely spread in the Iraqi land, and characterized with containing ricin toxin, which has a very serious effects, and because the seeds of this plant scattered in the agricultural soil and rivers water, which increases the exposure of humans and animals to these beans. Objective: This experiment was designed to study the effect of high concentration of castor bean powder in some physiological and biochemical parameters and changes in some tissues of the body, as well as trying to use doxycycline to reduce the effects of ingestion of these seeds. Materials and Methods: In the experiment, 24 local rabbits were raised and fed in the Animal House of the Faculty of Medicine / Al-Muthanna University, then divided into four groups and treated for three weeks (21 days), Control group: treated with normal saline solution (0.9) orally throughout the experiment, G1: was treated orally with a concentration of 25 mg / kg of castor bean powder daily during the experiment, G2 : orally treated 25 mg / kg of castor bean and 25 mg / kg of doxycycline, G3: orally treated 25 mg / kg of castor powder with 50 mg / kg of doxycycline daily throughout the trial period. Results: The results of the experiment showed significant changes (P less than 0.05) in all physiological and biochemical blood tests when compared with control group. There was a significant decrease in PCV, Hb, RBC, T.protein and body weights, while demonstrated a significant increase in WBC, Urea, Creatinine, ALT, AST and ALP, with distortions in liver and kidney of animals that treated with Castor beans. In contrast, the treatment with doxycycline and caster beans showed significant improvement reflected by a normal proportion in physiological tests and biochemical tests with improvement in the tissues when compared to control group. Conclusions: It can be concluded from this study that castor bean has high toxic and pathogenic effects that may be dangerous to the life of the organism. Therefore, it is advisable to be cautious of these pills and avoid exposure to them, also recommended to take high concentrations of doxycycline treatment when infected with castor bean poisoning.

The Effects of Shock Vancomycin Concentrations on the Formation of Heteroresistance in Staphylococcus aureus

2020 ◽  
Vol 65 (9-10) ◽  
pp. 3-7
Author(s):  
V. V. Gostev ◽  
Yu. V. Sopova ◽  
O. S. Kalinogorskaya ◽  
M. E. Velizhanina ◽  
I. V. Lazareva ◽  
...  
Keyword(s):  
Staphylococcus Aureus ◽  
In Vitro Selection ◽  
Methicillin Resistant Staphylococcus Aureus ◽  
High Concentration ◽  
Short Term ◽  
High Concentrations ◽  
Selection Of ◽  
Selection Of Resistance ◽  
Test Cultures

Glycopeptides are the basis of the treatment of infections caused by MRSA (Methicillin-Resistant Staphylococcus aureus). Previously, it was demonstrated that antibiotic tolerant phenotypes are formed during selection of resistance under the influence of high concentrations of antibiotics. The present study uses a similar in vitro selection model with vancomycin. Clinical isolates of MRSA belonging to genetic lines ST8 and ST239, as well as the MSSA (ATCC29213) strain, were included in the experiment. Test isolates were incubated for five hours in a medium with a high concentration of vancomycin (50 μg/ml). Test cultures were grown on the medium without antibiotic for 18 hours after each exposure. A total of ten exposure cycles were performed. Vancomycin was characterized by bacteriostatic action; the proportion of surviving cells after exposure was 70–100%. After selection, there was a slight increase in the MIC to vancomycin (MIC 2 μg/ml), teicoplanin (MIC 1.5–3 μg/ml) and daptomycin (MIC 0.25–2 μg/ml). According to the results of PAP analysis, all strains showed an increase in the area under curve depending on the concentration of vancomycin after selection, while a heteroresistant phenotype (with PAP/AUC 0.9) was detected in three isolates. All isolates showed walK mutations (T188S, D235N, E261V, V380I, and G223D). Exposure to short-term shock concentrations of vancomycin promotes the formation of heteroresistance in both MRSA and MSSA. Formation of VISA phenotypes is possible during therapy with vancomycin.

Growth responses of periphyton and chironomids exposed to biologically treated bleached kraft pulp mill effluent

1997 ◽  
Vol 35 (2-3) ◽  
pp. 339-345 ◽  
Author(s):  
M. G. Dubé ◽  
J. M. Culp
Keyword(s):  
Kraft Pulp ◽  
Pulp Mill ◽  
Pulp Mill Effluent ◽  
Growth Responses ◽  
High Concentration ◽  
Wood Extractives ◽  
Kraft Pulp Mill ◽  
Bleached Kraft Pulp ◽  
Low Levels ◽  
High Concentrations

Experiments were conducted in artificial streams to determine the effects of increasing concentrations of biologically treated bleached kraft pulp mill effluent (BKPME) on periphyton and chironomid growth in the Thompson River, British Columbia. Periphyton growth, as determined by increases in chlorophyll a, was significantly stimulated at all effluent concentrations tested (0.25%, 0.5%, 1.0%, 5.0% and, 10.0%). Chironomid growth (individual weight) was also significantly stimulated at low effluent concentrations (≤1.0%). At higher concentrations (5.0% and 10.0%), chironomid growth was inhibited relative to the 1.0% treatment streams. Increases in growth were attributed to the effects of nutrient and organic enrichment from BKPME. The effluent contained high concentrations of phosphorus and appears to be an important source of carbon for benthic insects grazing on the biofilm. In high concentration effluent streams, chironomid growth decreased despite low levels of typical pulp mill contaminants. This suggests that other compounds in the effluent, such as wood extractives, may be inhibiting chironomid growth. These results support findings of field monitoring studies conducted in the Thompson River where changes in periphyton and chironomid abundance occurred downstream of the bleached kraft pulp mill.

scholarly journals Spatial Analysis (Measurements at Heights of 10 m and 20 m above Ground Level) of the Concentrations of Particulate Matter (PM10, PM2.5, and PM1.0) and Gaseous Pollutants (H2S) on the University Campus: A Case Study

Atmosphere ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 62
Author(s):  
Robert Cichowicz ◽  
Maciej Dobrzański
Keyword(s):  
Spatial Distribution ◽  
Hydrogen Sulfide ◽  
Particulate Matter ◽  
Air Quality ◽  
Spatial Analysis ◽  
Ground Level ◽  
Leeward Side ◽  
High Concentration ◽  
Above Ground Level ◽  
High Concentrations

Spatial analysis of the distribution of particulate matter PM10, PM2.5, PM1.0, and hydrogen sulfide (H2S) gas pollution was performed in the area around a university library building. The reasons for the subject matter were reports related to the perceptible odor characteristic of hydrogen sulfide and a general poor assessment of air quality by employees and students. Due to the area of analysis, it was decided to perform measurements at two heights, 10 m and 20 m above ground level, using measuring equipment attached to a DJI Matrice 600 unmanned aerial vehicle (UAV). The aim of the measurements was air quality assessment and investigate the convergence of the theory of air flow around the building with the spatial distribution of air pollutants. Considerable differences of up to 63% were observed in the concentrations of pollutants measured around the building, especially between opposite sides, depending on the direction of the wind. To explain these differences, the theory of aerodynamics was applied to visualize the probable airflow in the direction of the wind. A strong convergence was observed between the aerodynamic model and the spatial distribution of pollutants. This was evidenced by the high concentrations of dust in the areas of strong turbulence at the edges of the building and on the leeward side. The accumulation of pollutants was also clearly noticeable in these locations. A high concentration of H2S was recorded around the library building on the side of the car park. On the other hand, the air turbulence around the building dispersed the gas pollution, causing the concentration of H2S to drop on the leeward side. It was confirmed that in some analyzed areas the permissible concentration of H2S was exceeded.

scholarly journals Migration from acrylonitrile butadiene styrene (ABS) polymer: swelling effect of food simulants compared to real foods

2021 ◽  
Author(s):  
Valeria Guazzotti ◽  
Annika Ebert ◽  
Anita Gruner ◽  
Frank Welle
Keyword(s):  
Acrylonitrile Butadiene Styrene ◽  
Polymer Swelling ◽  
Food Simulants ◽  
Diffusion Parameters ◽  
Compliance Testing ◽  
Diffusion Migration ◽  
Different Temperatures ◽  
Effect Of Food ◽  
High Concentrations ◽  
Butadiene Styrene

AbstractMaterials and articles made of acrylonitrile–butadiene–styrene (ABS) intended for contact with food must comply with the requirements of the European Plastic Regulation (EU) 10/2011, which lays down the food simulants and the time/temperature conditions to be applied for migration testing. Previous studies indicated that high concentrations of ethanol at temperatures above ambient may lead to swelling of ABS polymers resulting in increased migration. In this study migration kinetic data for a set of model substances at different temperatures were obtained using both food simulants stipulated in EU regulations and real food (milk, cream and olive oil). At the same time, the extent of polymer swelling was gravimetrically characterized after contact with simulants and different foods tested at several conditions to cover the majority of foreseeable applications of ABS. The obtained results confirmed that the use of high concentrations of ethanol–water, especially at high temperatures, causes the swelling of ABS polymers and results in significantly higher migration values compared to the tested foods as well as Tenax®. None of the real foods studied cause significant swelling of ABS. The widely used simulant 95% (v/v) aqueous ethanol proves not be suitable for compliance testing of ABS under the recommended conditions of Regulation (EU) 10/2011. Swelling of the polymer results in artificially higher diffusion coefficients or lower activation energies of diffusion. Migration prediction using polymer-specific diffusion parameters should therefore be considered to avoid over-conservative risk assessment for food contact materials and articles made of ABS.

scholarly journals Photocrosslinking and photopatterning of magneto-optical nanocomposite sol–gel thin film under deep-UV irradiation

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
C. Bidaud ◽  
D. Berling ◽  
D. Jamon ◽  
E. Gamet ◽  
S. Neveu ◽  
...  
Keyword(s):  
Uv Irradiation ◽  
Cobalt Ferrite ◽  
Sol Gel ◽  
Optical Devices ◽  
High Concentration ◽  
Nanocomposite Thin Films ◽  
Deep Uv ◽  
High Concentrations ◽  
193 Nm ◽  
The Impact

AbstractThis paper is aimed at investigating the process of photocrosslinking under Deep-UV irradiation of nanocomposite thin films doped with cobalt ferrite magnetic nanoparticles (MNPs). This material is composed of a hybrid sol–gel matrix in which MNP can be introduced with high concentrations up to 20 vol%. Deep-UV (193 nm) is not only interesting for high-resolution patterning but we also show an efficient photopolymerization pathway even in the presence of high concentration of MNPs. In this study, we demonstrate that the photocrosslinking is based on the free radical polymerization of the methacrylate functions of the hybrid precursor. This process is initiated by Titanium-oxo clusters. The impact of the nanoparticles on the photopolymerization kinetic and photopatterning is investigated. We finally show that the photosensitive nanocomposite is suitable to obtain micropatterns with sub-micron resolution, with a simple and versatile process, which opens many opportunities for fabrication of miniaturized magneto-optical devices for photonic applications.

Sign in / Sign up

Export Citation Format

Share Document