Produce of Strong Pulse Electromagnetic Field and its Biological Effect

2014 ◽  
Vol 933 ◽  
pp. 216-219
Author(s):  
Gun Li
Keyword(s):  
Electromagnetic Field ◽  
Biological Effect ◽  
Spectral Properties ◽  
Field Effect ◽  
Fluorescence Emission ◽  
Biological Tissues ◽  
Pulse Electromagnetic Field ◽  
Emission Mechanism ◽  
Pulse Electromagnetic Fields ◽  
Important Significance

Fluorescence emission mechanism of biological tissue is very complex, and related researches have very important significance. Spectroscopy of many biological tissues has been used in clinic; this paper attends to study the mechanism and its implementation pulse electromagnetic fields. We than study the pulse electromagnetic field effect on blood brain barrier of rat by fluorescence spectral properties, which caused by the fluorescent material only could through loose membrane, the results show that pulse electromagnetic field could effect the fluorescence properties of brain in rats, mechanisms of these phenomena also analyzed.

TREATMENT OF WELDED JOINTS BY A PULSE ELECTROMAGNETIC FIELD WITH SMALL SKIN-EFFECT

2018 ◽  
Vol 2018 (50) ◽  
pp. 106-114
Author(s):  
Yu. Vasetskiy ◽  
◽  
I. Kondratenko ◽  
I. Mazurenko ◽  
М. Pashchyn ◽  
...  
Keyword(s):  
Electromagnetic Field ◽  
Welded Joints ◽  
Skin Effect ◽  
Pulse Electromagnetic Field

Electromagnetic fields enhance chondrogenesis of human adipose-derived stem cells in a chondrogenic microenvironment in vitro

2013 ◽  
Vol 114 (5) ◽  
pp. 647-655 ◽  
Author(s):  
Chung-Hwan Chen ◽  
Yi-Shan Lin ◽  
Yin-Chih Fu ◽  
Chih-Kuang Wang ◽  
Shun-Cheng Wu ◽  
...  
Keyword(s):  
Stem Cells ◽  
Electromagnetic Field ◽  
Cell Viability ◽  
Chondrogenic Differentiation ◽  
Collagen Type ◽  
Cartilage Tissue ◽  
Pulse Electromagnetic Field ◽  
Type I ◽  
Adipose Derived Stem Cells ◽  
Pemf Treatment

We tested the hypothesis that electromagnetic field (EMF) stimulation enhances chondrogenesis in human adipose-derived stem cells (ADSCs) in a chondrogenic microenvironment. A two-dimensional hyaluronan (HA)-coated well (2D-HA) and a three-dimensional pellet culture system (3D-pellet) were used as chondrogenic microenvironments. The ADSCs were cultured in 2D-HA or 3D-pellet, and then treated with clinical-use pulse electromagnetic field (PEMF) or the innovative single-pulse electromagnetic field (SPEMF) stimulation. The cytotoxicity, cell viability, and chondrogenic and osteogenic differentiations were analyzed after PEMF or SPEMF treatment. The modules of PEMF and SPEMF stimulations used in this study did not cause cytotoxicity or alter cell viability in ADSCs. Both PEMF and SPEMF enhanced the chondrogenic gene expression (SOX-9, collagen type II, and aggrecan) of ADSCs cultured in 2D-HA and 3D-pellet. The expressions of bone matrix genes (osteocalcin and collagen type I) of ADSCs were not changed after SPEMF treatment in 2D-HA and 3D-pellet; however, they were enhanced by PEMF treatment. Both PEMF and SPEMF increased the cartilaginous matrix (sulfated glycosaminoglycan) deposition of ADSCs. However, PEMF treatment also increased mineralization of ADSCs, but SPEMF treatment did not. Both PEMF and SPEMF enhanced chondrogenic differentiation of ADSCs cultured in a chondrogenic microenvironment. SPEMF treatment enhanced ADSC chondrogenesis, but not osteogenesis, when the cells were cultured in a chondrogenic microenvironment. However, PEMF enhanced both osteogenesis and chondrogenesis under the same conditions. Thus the combination of a chondrogenic microenvironment with SPEMF stimulation can promote chondrogenic differentiation of ADSCs and may be applicable to articular cartilage tissue engineering.

The Investigation on the Non-Contact Treatment of the Metal Surface Layer by Using Strong Pulse Electromagnetic Field

2011 ◽  
Vol 299-300 ◽  
pp. 65-68
Author(s):  
Ming Gao ◽  
Li Li Zhang ◽  
Tao Huang ◽  
Meng Ru Lv
Keyword(s):  
Electromagnetic Field ◽  
Surface Layer ◽  
Metal Surface ◽  
Recovery Process ◽  
Pulse Electromagnetic Field ◽  
Contact Method ◽  
Brass Surface ◽  
Metal Materials ◽  
Metal Surface Layer ◽  
Wood’S Alloy

A strong pulse electromagnetic field was employed to treat the surface layer of several metal materials. The results showed that the treatment of the strong pulse electromagnetic field could modify the microstructure of the region around the crack on the 45# steel surface. It could also make the recovery process occur in the scratch on the brass surface, and make the surface layer of the Wood’s alloy melt in a very shot time. These results indicated that the strong electromagnetic pulse could be developed as an effective non-contact method for the metal surface processing.

scholarly journals Application of postured human model for SAR measurements

2013 ◽  
Vol 11 ◽  
pp. 347-352
Author(s):  
M. Vuchkovikj ◽  
I. Munteanu ◽  
T. Weiland
Keyword(s):  
Electromagnetic Field ◽  
Mobile Phones ◽  
Biological Tissues ◽  
Human Model ◽  
Homogeneous Material ◽  
Software Application ◽  
Research Activities ◽  
Human Models ◽  
Digital Human Models ◽  
Digital Human

Abstract. In the last two decades, the increasing number of electronic devices used in day-to-day life led to a growing interest in the study of the electromagnetic field interaction with biological tissues. The design of medical devices and wireless communication devices such as mobile phones benefits a lot from the bio-electromagnetic simulations in which digital human models are used. The digital human models currently available have an upright position which limits the research activities in realistic scenarios, where postured human bodies must be considered. For this reason, a software application called "BodyFlex for CST STUDIO SUITE" was developed. In its current version, this application can deform the voxel-based human model named HUGO (Dipp GmbH, 2010) to allow the generation of common postures that people use in normal life, ensuring the continuity of tissues and conserving the mass to an acceptable level. This paper describes the enhancement of the "BodyFlex" application, which is related to the movements of the forearm and the wrist of a digital human model. One of the electromagnetic applications in which the forearm and the wrist movement of a voxel based human model has a significant meaning is the measurement of the specific absorption rate (SAR) when a model is exposed to a radio frequency electromagnetic field produced by a mobile phone. Current SAR measurements of the exposure from mobile phones are performed with the SAM (Specific Anthropomorphic Mannequin) phantom which is filled with a dispersive but homogeneous material. We are interested what happens with the SAR values if a realistic inhomogeneous human model is used. To this aim, two human models, a homogeneous and an inhomogeneous one, in two simulation scenarios are used, in order to examine and observe the differences in the results for the SAR values.

scholarly journals The depth range of the Earth'snatural pulse electromagneticfield (or ENPEMF)

2019 ◽  
Vol 27 (3) ◽  
pp. 466-477 ◽  
Author(s):  
E. D. Kuzmenko ◽  
S. M. Bahrii ◽  
U. O. Dzioba
Keyword(s):  
Electromagnetic Field ◽  
Pulse Electromagnetic Field ◽  
Depth Range ◽  
Advantages And Disadvantages ◽  
The Earth ◽  
Mechanical Deformations ◽  
Specific Electric Resistance ◽  
Conducting Research ◽  
The University ◽  
The Impact

On the basis of the analysis of the literature sources, we determined the possible range of using the method of the Earth`s natural pulse electromagnetic field. As a result of detailed analysis of domestic and foreign research, we demonstrated the relevance of conducting research focused on development of the Earth'snatural pulse electromagneticfield (or ENPEMF). Using the results of theoretical studies, the advantages and disadvantages of the ENPEMF method were determined. A complex of physical processes which preceded the development of the pulse electromagnetic field of the Earth was characterized, and the impact of mechanical deformations of rocks on the change in the condition of the electromagnetic field was experimentally proven. The main fundamentals on the determination of depth range of the ENPEMF method were examined and a new approach to interpretation of the data was suggested. We conducted an analysis of methods developed earlier of calculating geometric parameters of the sources which generate electromagnetic impulses. Their practicability at a certain stage of solving the data of geological tasks was experimentally tested. We determined the factors which affect the depth range of the ENPEMF method. A mathematical solution of the effectiveness of the ENPEMF method was suggested and determined the relations between the depth parameter of the study and the frequency of measuring and effective value of specific electric resistance. On the example of different objects, the effectiveness and correctness of the suggested method of determining the depth range parameter was proven. In particular, the theoretical results of the study were tested and confirmed on objects of different geological-morphological and engineering-technical aspects, i.e. Novo-Holyn mine in the Kalush-Holynske potash deposit and the multi-storey educational building of the University in Ivano-Frankivsk. The practicability of using the ENPEMF method in combination with other methods of electrometry for solving practical geological tasks was experimentally proven.

Sign in / Sign up

Export Citation Format

Share Document