Synthesis and Optical Property of MgMoO4 Crystals

2014 ◽  
Vol 975 ◽  
pp. 243-247 ◽  
Author(s):  
Camila Soares Xavier ◽  
Ana Paula de Moura ◽  
Elson Longo ◽  
José Arana Varela ◽  
Maria Aparecida Zaghete
Keyword(s):  
Mixed Method ◽  
Room Temperature ◽  
Optical Band Gap ◽  
Monoclinic Structure ◽  
Secondary Phases ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ft Ir ◽  
Pl Emission ◽  
Yellow Region

In this work, we report on the synthesis of MgMoO4 crystals by oxide mixed method. The powder was calcined at 1100 °C for 4h and analyzed by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), Field emission gun scanning electron microscopy (FEG-SEM), Ultraviolet-visible (UV-vis) absorption spectroscopy and Photoluminescence (PL) measurement. XRD analyses revealed that the MgMoO4 powders crystallize in a monoclinic structure and are free secondary phases. UVvis technique was employed to determine the optical band gap of this material. MgMoO4 crystals exhibit an intense PL emission at room temperature with maximum peak at 579 nm (yellow region) when excited by 350 nm wavelength at room temperature.

scholarly journals Optical and thermal properties of TeO2–B2O3–Gd2O3 glass systems

2019 ◽  
Vol 37 (4) ◽  
pp. 517-525
Author(s):  
C. Eevon ◽  
M.K. Halimah ◽  
M.N. Azlan ◽  
R. El-Mallawany ◽  
S.L. Hii
Keyword(s):  
Thermal Properties ◽  
Room Temperature ◽  
Optical Band Gap ◽  
Urbach Energy ◽  
Glass Network ◽  
X Ray Diffraction ◽  
X Ray ◽  
Amorphous Nature ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

AbstractNew glass samples with composition (1 – x)[(TeO2)70(B2O3)30] – x(Gd2O3) with x = 0.2, 0.4, 0.6, 0.8 and 1.0 in mol% have been synthesized by conventional melt-quenching techniques. X-ray diffraction (XRD) studies were performed in order to confirm the amorphous nature of the samples. The density of the samples has been found to vary with the Gd2O3 content, whereas an opposite trend has been observed in the molar volume. The analysis of Fourier Transform Infrared (FT-IR) spectroscopy of the samples showed that the glass network is mainly built of TeO3, TeO4, BO3 and BO4 units. The addition of Gd2O3 changed the refractive index, optical band gap and Urbach energy of the glass samples. The thermal properties of the studied glasses were investigated by measuring the thermal diffusivity of the samples by using photoflash method at room temperature.

scholarly journals Synthesis of Magnetic Ferrocene-Containing Polymer with Photothermal Effects for Rapid Degradation of Methylene Blue

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 558
Author(s):  
Wenhui Zhu ◽  
Caiyun Zhang ◽  
Yali Chen ◽  
Qiliang Deng
Keyword(s):  
Methylene Blue ◽  
Photoelectron Spectroscopy ◽  
Room Temperature ◽  
Degradation Rate ◽  
Model Compound ◽  
Vibrating Sample Magnetometer ◽  
Simulated Sunlight ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ft Ir

Photothermal materials are attracting more and more attention. In this research, we synthesized a ferrocene-containing polymer with magnetism and photothermal properties. The resulting polymer was characterized by Fourier-transform infrared (FT-IR), vibrating sample magnetometer (VSM), scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). Its photo-thermocatalytic activity was investigated by choosing methylene blue (MB) as a model compound. The degradation percent of MB under an irradiated 808 nm laser reaches 99.5% within 15 min, and the degradation rate is 0.5517 min−1, which is 145 times more than that of room temperature degradation. Under irradiation with simulated sunlight, the degradation rate is 0.0092 min−1, which is approximately 2.5 times more than that of room temperature degradation. The present study may open up a feasible route to degrade organic pollutants.

scholarly journals MOVPE Growth of Quaternary (Al,Ga,In)N for UV Optoelectronics

2000 ◽  
Vol 5 (S1) ◽  
pp. 412-424
Author(s):  
Jung Han ◽  
Jeffrey J. Figiel ◽  
Gary A. Petersen ◽  
Samuel M. Myers ◽  
Mary H. Crawford ◽  
...  
Keyword(s):  
Room Temperature ◽  
Rutherford Backscattering Spectrometry ◽  
Optoelectronic Devices ◽  
Lattice Parameter ◽  
X Ray Diffraction ◽  
X Ray ◽  
Peak Energy ◽  
Movpe Growth ◽  
Pl Emission

We report the growth and characterization of quaternary AlGaInN. A combination of photoluminescence (PL), high-resolution x-ray diffraction (XRD), and Rutherford backscattering spectrometry (RBS) characterizations enables us to explore the contours of constant- PL peak energy and lattice parameter as functions of the quaternary compositions. The observation of room temperature PL emission at 351nm (with 20% Al and 5% In) renders initial evidence that the quaternary could be used to provide confinement for GaInN (and possibly GaN). AlGaInN/GaInN MQW heterostructures have been grown; both XRD and PL measurements suggest the possibility of incorporating this quaternary into optoelectronic devices.

scholarly journals A Novel Strong Cyan Luminescence Emission of Tb2O3 Particles

2021 ◽  
Author(s):  
Fatma Unal
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Ammonium Carbonate ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
Terbium Oxide ◽  
X Ray ◽  
Ft Ir ◽  
Pl Emission ◽  
Scanning Electron

Abstract Terbium oxide (Tb2O3) particles (NPs) were synthesized by precipitation method using ammonium carbonate as precipitation agent. Effects of precursor molarity (0.1, 0.15 and 0.2 M) on photoluminescence (PL) behaviour of the NPs were investigated. The presence of the Tb2O3 phase was confirmed by X-Ray Diffraction (XRD) and Fourier-transform infrared spectroscopy (FT-IR) analyses. Morphological investigations of the produced powders were made by Field Emission Gun-Scanning Electron Microscopy (FEG-SEM). It showed that the morphology of Tb2O3 particles transformed from the nanograin chain to bundles morphology of rod-like as the amount of precursor molarity increased. Emission spectrum were investigated by Photoluminescence (PL) Spectroscopy. All the Tb2O3 particles exhibited the strongest peak at 493 nm ascribed to 5D4-7F6 (magnetic dipole (MD), C2) transition. The increase in the number of C2 sites released from the MD transition with the increase of the precursor molarity caused a negative increase in the b* (yellowness/blueness of the emission) value in the CIE diagram, indicating that the colour shifted to the blue region. The Tb2O3 particles produced by the precipitation method exhibited novel strong cyan colour and the PL emission intensity increased with increasing molarity.

scholarly journals Cubic InGaN Grown by MOCVD

1999 ◽  
Vol 4 (S1) ◽  
pp. 239-243
Author(s):  
J.B. Li ◽  
Hui Yang ◽  
L.X. Zheng ◽  
D.P. Xu ◽  
Y.T. Wang
Keyword(s):  
Room Temperature ◽  
Emission Peak ◽  
Buffer Layers ◽  
Cubic Phase ◽  
Yellow Luminescence ◽  
X Ray Diffraction ◽  
High Quality ◽  
X Ray ◽  
Cubic Gan ◽  
Pl Emission

We report on the growth of high-quality cubic phase InGaN on GaAs by MOCVD. The cubic InGaN layers are grown on cubic GaN buffer layers on GaAs (001) substrates. The surface morphology of the films are mirror-like. The cubic nature of the InGaN films is obtained by X-ray diffraction (XRD) measurements. The InGaN layers show strong photoluminescence (PL) at room temperature. Neither emission peak from wurtzite GaN nor yellow luminescence is observed in our films. The highest In content as determined by XRD is about 17% with an PL emission wavelength of 450 nm. The FWHM of the cubic InGaN PL peak are 153 meV and 216 meV for 427 nm and 450 nm emissions, respectively. It is found that the In compositions determined from XRD are not in agreement with those estimated from PL measurements. The reasons for this disagreement are discussed.

MOVPE Growth of Quaternary (Al,Ga,In)N for UV Optoelectronics

1999 ◽  
Vol 595 ◽  
Author(s):  
Jung Han ◽  
Jeffrey J. Figiel ◽  
Gary A. Petersen ◽  
Samuel M. Myers ◽  
Mary H. Crawford ◽  
...  
Keyword(s):  
Room Temperature ◽  
Rutherford Backscattering Spectrometry ◽  
Optoelectronic Devices ◽  
Lattice Parameter ◽  
X Ray Diffraction ◽  
X Ray ◽  
Peak Energy ◽  
Movpe Growth ◽  
Pl Emission

AbstractWe report the growth and characterization of quaternary AlGaInN. A combination of photoluminescence (PL), high-resolution x-ray diffraction (XRD), and Rutherford backscattering spectrometry (RBS) characterizations enables us to explore the contours of constant- PL peak energy and lattice parameter as functions of the quaternary compositions. The observation of room temperature PL emission at 351nm (with 20% Al and 5% In) renders initial evidence that the quaternary could be used to provide confinement for GaInN (and possibly GaN). AlGaInN/GaInN MQW heterostructures have been grown; both XRD and PL measurements suggest the possibility of incorporating this quaternary into optoelectronic devices.

scholarly journals Influence of different synthesis conditions on properties of oleic acid-coated-Fe3O4 nanoparticles

2015 ◽  
Vol 33 (1) ◽  
pp. 100-106 ◽  
Author(s):  
Atieh Aliakbari ◽  
Majid Seifi ◽  
Sharareh Mirzaee ◽  
Hoda Hekmatara
Keyword(s):  
Oleic Acid ◽  
Room Temperature ◽  
Magnetic Measurement ◽  
Precursor Solution ◽  
Vibrating Sample Magnetometer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Synthesis Conditions ◽  
Transmission Electron ◽  
Ft Ir

AbstractIn the present paper, iron oxide nanoparticles coated by oleic acid have been synthesized in different conditions by coprecipitation method. For investigating the effect of time spent on adding the oleic acid to the precursor solution, two different processes have been considered. The as synthesized samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FT-IR). Magnetic measurement was carried out at room temperature using a vibrating sample magnetometer (VSM). The results show that the magnetic nanoparticles decorated with oleic acid decreased the saturation of magnetization. From the data, it can also be concluded that the magnetization of Fe3O4/oleic acid nanoparticles depends on synthesis conditions.

Hydrothermal Synthesis and Room Temperature Ferromagnetism of Ni-Doped Rod-Like ZnO Particles

2014 ◽  
Vol 934 ◽  
pp. 71-74
Author(s):  
Lian Mao Hang ◽  
Zhao Ji Zhang ◽  
Zhi Yong Zhang
Keyword(s):  
Quantum Interference ◽  
Room Temperature ◽  
Room Temperature Ferromagnetism ◽  
Hexagonal Wurtzite Structure ◽  
Ferromagnetic Behavior ◽  
Secondary Phases ◽  
Superconducting Quantum Interference Device ◽  
X Ray Diffraction ◽  
X Ray ◽  
Zno Particles

Ni-doped rod-like ZnO particles with doping concentration of 1 at.% were synthesized at 200°C by hydrothermal method and characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM) and superconducting quantum interference device (SQUID). The results show that the as-synthesized samples are pure hexagonal wurtzite structure without metallic Ni or other secondary phases and display rod-like shape with smooth surface. The magnetization measurements reveal that the Ni-doped rod-like ZnO particles show ferromagnetic behavior at room temperature. The saturation magnetization and coercive field are 0.0046 emu/g and 15 Oe, respectively.

scholarly journals Ultrasound-Assisted Rapid ZIF-8 Synthesis, Porous ZnO Preparation by Heating ZIF-8, and Their Photocatalytic Activity

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Pham Dinh Du ◽  
Nguyen Trung Hieu ◽  
Tran Vinh Thien
Keyword(s):  
Photocatalytic Activity ◽  
Room Temperature ◽  
Diffuse Reflectance ◽  
Nitrogen Adsorption ◽  
X Ray Diffraction ◽  
Zeolitic Imidazolate Framework ◽  
X Ray ◽  
Photocatalytic Activities ◽  
Ft Ir ◽  
Adsorption Desorption

Zeolitic imidazolate framework-8 (ZIF-8) is synthesized quickly at room temperature in methanol with the support of ultrasound. Porous ZnO is also prepared via the thermal treatment of ZIF-8. The photocatalytic activities of the obtained materials are demonstrated via methylene blue (MB) decomposition under UV radiation. The obtained materials are characterized by means of X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), nitrogen adsorption/desorption isotherms, UV-Vis diffuse reflectance spectra (DR-UV-Vis), and photoluminescence spectra. The results indicate that ZIF-8 and the materials obtained from ZIF-8 by heating in the air have photocatalytic activity under UV irradiation. The ZnO sample obtained by ZIF-8 calcination at 660°C for 5 h has the highest photocatalytic activity. However, the MB degradation photocatalytic efficiency of the ZnO samples is even lower than that of the ZIF-8 samples, indicating that ZIF-8 is an effective photocatalyst in the treatment of environmental pollution.

scholarly journals Studies on the growth and characterization of L-cysteine hydrogen fluoride single crystal

2019 ◽  
Vol 37 (3) ◽  
pp. 304-309
Author(s):  
Azeezaa Varsha Mohammed ◽  
Suresh Sagadevan
Keyword(s):  
Single Crystal ◽  
Hydrogen Fluoride ◽  
Grown Crystal ◽  
Optical Band Gap ◽  
Second Harmonic ◽  
X Ray Diffraction ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Ft Ir

AbstractL-cysteine hydrogen fluoride (LCHF) single crystals were grown from aqueous solution. Single crystal X-ray diffraction, FT-IR, UV-Vis-NIR, and TG-DTA were used to test the grown crystals. The specimen dielectric and mechanical behaviors were also studied. Powder X-ray diffraction of the grown crystal was recorded and indexed. The optical properties of the LCHF crystal were determined using UV-Vis spectroscopy. It was found that the optical band gap of LCHF was 4.8 eV. The crystal functional groups were identified using FT-IR. Second harmonic generation (SHG) efficiency of the LCHF was three times higher than that of KDP. The dielectric constant, dielectric loss and AC conductivity were measured at different frequencies and temperatures.

Sign in / Sign up

Export Citation Format

Share Document