Feasibility Analysis of Self-Reactive Spray Forming TiC-TiB2-Based Composite Ceramic Preforms

2008 ◽  
Vol 368-372 ◽  
pp. 1126-1129 ◽  
Author(s):  
Hong Wei Liu ◽  
Long Zhang ◽  
Jian Jiang Wang ◽  
Xin Kang Du
Keyword(s):  
Low Cost ◽  
New Technology ◽  
Composite Ceramic ◽  
Spray Forming ◽  
The Self ◽  
High Temperature Synthesis ◽  
Near Net Shape ◽  
Columnar Grain ◽  
Metal Spray ◽  
Base Phase

A new near-net-shape technology, namely, self-reactive spray forming, to prepare ceramic preforms with low cost was proposed by combining the self-propagating high-temperature synthesis (SHS) with the metal spray forming. The feasibility of the technology was illustrated. And TiC-TiB2 -based structural ceramic was prepared by the new technology. The microstructure of the self-reactive spray formed preforms was analyzed. It was shown that the self-reactive spray formed preforms are composed of four kinds of structure, which takes on the characteristics of rapid solidification. They are griseous continuous base phase TiC0.3N0.7, black columnar grain TiB2 with the size of 100nm-1μm, white by-product phase TiO2 distributing along the boundary of the base phase, and a few of black anomalous pores respectively.

A simple method to construct a low-cost immunosensor based on a dithiol-functionalized polydopamine platform

2021 ◽  
Author(s):  
Bo Liu ◽  
Luanying Yang ◽  
Gang Wang ◽  
Sha He ◽  
Xiaobo Wang ◽  
...  
Keyword(s):  
Detection Limit ◽  
Linear Response ◽  
Low Cost ◽  
Covalent Immobilization ◽  
The Self ◽  
Simple Method ◽  
Low Detection Limit

A simple and low-cost electrochemical CEA immunosensor was investigated via the self-polymerization of dopamine and a dithiol compound spacer for the covalent immobilization of antibodies. The designed CEA immunosensor exhibited a linear response and a low detection limit.

scholarly journals Ga-La-S-Se glass for visible and thermal imaging

2017 ◽  
Vol 6 (2) ◽  
Author(s):  
Andrea Ravagli ◽  
Christopher Craig ◽  
John Lincoln ◽  
Daniel W. Hewak
Keyword(s):  
Thermal Imaging ◽  
Chalcogenide Glasses ◽  
Infrared Imaging ◽  
Low Cost ◽  
Short Wave ◽  
Infrared Transmission ◽  
New Family ◽  
Near Net Shape ◽  
Se Glass ◽  
Long Wave Infrared

AbstractChalcogenide glasses are emerging as important enabling materials for low-cost infrared imaging by virtue of their transparency in the key short-wave infrared (SWIR) to long-wave infrared (LWIR) bands and the ability to be mass produced and molded into near-net shape lenses. In this paper, we introduce a new family of chalcogenide glasses, which offer visible as well as infrared transmission and improved thermal and mechanical properties. These glasses are based on Ga

Influence of Cu addition on the self-propagating high-temperature synthesis of Ti5Si3 in Cu–Ti–Si system

2008 ◽  
Vol 111 (2-3) ◽  
pp. 463-468 ◽  
Author(s):  
H.Y. Wang ◽  
S.J. Lü ◽  
M. Zha ◽  
S.T. Li ◽  
C. Liu ◽  
...  
Keyword(s):  
High Temperature ◽  
The Self ◽  
Temperature Synthesis ◽  
High Temperature Synthesis

Self-propagating high-temperature synthesis microalloying of MoSi2 with Nb and V

2003 ◽  
Vol 18 (8) ◽  
pp. 1842-1848 ◽  
Author(s):  
F. Maglia ◽  
C. Milanese ◽  
U. Anselmi-Tamburini ◽  
Z. A. Munir
Keyword(s):  
Solid Solution ◽  
High Temperature ◽  
Tetragonal Phase ◽  
Synthesis Method ◽  
The Self ◽  
Alloying Elements ◽  
Alloying Element ◽  
Temperature Synthesis ◽  
Starting Mixture ◽  
High Temperature Synthesis

Microalloying of MoSi2 to form Mo(1−x)MexSi2 (Me = Nb or V) was investigated by the self-propagating high-temperature synthesis method. With alloying element contents up to 5 at.%, a homogeneous C11b solid solution was obtained. For higher contents of alloying elements, the product contained both the C11b and the hexagonal C40 phases. The relative amount of the C40 phase increases with an increase in the content of alloying metals in the starting mixture. The alloying element content in the hexagonal C40 Mo(1−x)MexSi2 phase was nearly constant at a level of about 12 at.% for all starting compositions. In contrast, the content of the alloying elements in the tetragonal phase is considerably lower (around 4 at.%) and increases slightly as the Me content in the starting mixture is increased.

The Forties and Brimmond Fields, Blocks 21/10, 22/6a, UK North Sea

2003 ◽  
Vol 20 (1) ◽  
pp. 557-561 ◽  
Author(s):  
A. Carter ◽  
J. Heale
Keyword(s):  
North Sea ◽  
Low Cost ◽  
New Technology ◽  
Horizontal Wells ◽  
Oil Price ◽  
3D Seismic ◽  
Rotary Drilling ◽  
Geological Society ◽  
Recoverable Reserves ◽  
Infill Drilling

AbstractThis paper updates the earlier account of the Forties Field detailed in Geological Society Memoir 14 (Wills 1991), and gives a brief description of the Brimmond Field, a small Eocene accumulation overlying Forties (Fig. 1).The Forties Field is located 180 km ENE of Aberdeen. It was discovered in 1970 by well 21/10-1 which encountered 119 m of oil bearing Paleocene sands at a depth of 2131 m sub-sea. A five well appraisal programme confirmed the presence of a major discovery including an extension into Block 22/6 to the southeast. Oil-in-place was estimated to be 4600 MMSTB with recoverable reserves of 1800 MM STB. The field was brought onto production in September 1975. Plateau production of 500 MBOD was reached in 1978, declining from 1981 to 77 MBOD in 1999.In September 1992 a programme of infill drilling commenced, which continues today. The earlier infill targets were identified using 3D seismic acquired in 1988. Acquisition of a further 3D survey in 1996 has allowed the infill drilling programme to continue with new seismic imaging of lithology, fluids and saturation changes. The performance of the 1997 drilling showed that high step-out and new technology wells, including multi-lateral and horizontal wells, did not deliver significantly better targets than drilling in previous years.In line with smaller targets, and in the current oil price environment, low cost technology is being developed through the 1999 drilling programme. Through Tubing Rotary Drilling (TTRD) is currently seen as the most promising way of achieving a step

INFLUENCE OF LOW-COST BUILDING MATERIALS ON HOUSING PROJECT IN REDUCTION OF HOUSING DEFICIT IN NAIROBI CITY COUNTY, KENYA

2019 ◽  
Vol 4 (2) ◽  
pp. 23-37
Author(s):  
Kamau Maina ◽  
Dr. Samson Nyang’au Paul
Keyword(s):  
Transformational Leadership ◽  
Real Estate ◽  
Building Materials ◽  
Low Cost ◽  
New Technology ◽  
Labour Productivity ◽  
Reliability And Validity ◽  
Value Theory ◽  
Modern Technology ◽  
Primary Data

Purpose: The purpose of the study was to explore the influence of low cost building materials on reduction of housing deficit in Nairobi County, Kenya.Methodology: The study adopted four theories: open innovations theory, the value theory, transformational leadership theory, and institutional theory. Methodologically, the study adopted a descriptive research design, while the population of this study was all the real estate firms registered by Kenya Property Developers Association (KPDA). Census technique was employed to collect data from all 69 real estate firms using questionnaires. Questionnaires were applied to collect primary data, where the researcher trained research assistants to aid the data collection procedure. A pilot-test was conducted as an approach to establishing both the reliability and validity assessments of the questionnaire. Statistical packages for social sciences (SPSS) was used to undertake both descriptive and inferential statistical computations.Results: The findings of the study established that the use of technology enhances the capability and capacity of construction firms to use an array of building materials. The study found that use of modern technology defined skilled labour because most organizations are leveraging technology as a basis of realizing competitive advantage. It also established that real estate firms utilize competent based human resource management firms to hire qualified personnel. In addition, it was evident that personality traits influenced adoption of new technology in the construction of low cost housing, whereas knowledge and attitudes, and skills were significantly attributed to adoption of new technology.Unique contribution to theory, practice and policy: In light of the research findings, the study recommends that organizations should leverage modern technology as a basis of realizing efficiency, effectiveness, and sustainability of projects. The study likewise recommends that organizations should build capacities to enhance labour productivity. In addition, the study recommends that organizations should adopt transformational leadership approaches as a basis of enhancing performance. The study recommends the need to revise the legal framework with a view to ensure that it reflects the changing needs of the project requirements.

Sintering and Hot-Pressing of Ti2AlC Obtained by SHS Process

2010 ◽  
Vol 63 ◽  
pp. 282-286 ◽  
Author(s):  
Leszek Chlubny ◽  
Jerzy Lis ◽  
Mirosław M. Bućko
Keyword(s):  
Hot Pressing ◽  
High Efficiency ◽  
Layer Structure ◽  
Low Cost ◽  
Max Phases ◽  
Fine Powders ◽  
High Temperature Synthesis ◽  
Low Energy Consumption ◽  
Potential Applications ◽  
Xrd Method

Some of ternary materials in the Ti-Al-C system are called MAX-phases and are characterised by heterodesmic layer structure. Their specific structure consisting of covalent and metallic chemical bonds influence its semi-ductile features locating them on the boundary between metals and ceramics, which may lead to many potential applications, for example as a part of a ceramic armour. Ti2AlC is one of this nanolaminate materials. Self-propagating High-temperature Synthesis (SHS) was applied to obtain sinterable powders of Ti2AlC Utilization of heat produced in exothermal reaction in adiabatic conditions to sustain process until all substrates are transformed into product is one of the advantages of the method that result in low energy consumption and low cost combined with high efficiency. Different substrates were used to produce fine powders of ternary material. Phase compositions of obtained powder were examined by XRD method. Than selected powders were used for sintering in various temperature both in a presureless sintering and hot-pressing in argon atmosphere. Properties and phase composition of obtained products were examined.

scholarly journals Determinants of Adoption of New Technology in Telecom Sector: A Structural Equation Modeling Approach

2018 ◽  
Vol 20 (1) ◽  
pp. 166-178 ◽  
Author(s):  
Susmita Chatterjee ◽  
Bibek Ray Chaudhuri ◽  
Debabrata Dutta
Keyword(s):  
Structural Equation Modeling ◽  
Mobile Communications ◽  
Structural Equation ◽  
Low Cost ◽  
New Technology ◽  
Equation Modeling ◽  
Technology Standards ◽  
Technology Standard ◽  
The Usa ◽  
Adoption Of New Technology

In this article, we look at the determinants of the new technology adoption by consumers in the case of mobile telecommunications. The dynamic nature of the telecom industry is a result of the frequent technological change. Consumers witness different technology standards in mobile communications, starting from the first generation (1G) to second generation (2G) subsequently to third (3G) and now experiencing fourth (4G) in some countries such as Norway, Sweden, South Korea, and the USA including ours. The movement from one standard to the other has been predicted to be smooth as all of them are vertical substitutes for each other. Given the various dimensions such as price, requirements, utility and so on, these technology standards are not perfect substitutes. The article investigates the prospect of a new technology standard roll out in India. A survey of 400 mobile phone customers in metro telecom circles has been carried out for this purpose. The study applies structural equation modeling (SEM) and explores the adoption intention of this new technology among the respondents. Results show that the presence of low-cost alternatives that is the availability of a lower technology standard poses a significant hurdle to the adoption of new technology services.

Sign in / Sign up

Export Citation Format

Share Document