Web Oriented System Supporting Small-Medium Sized Manufacturers

2010 ◽  
Vol 450 ◽  
pp. 409-412
Author(s):  
Jia Chen Hou ◽  
Dai Zhong Su

. Small and medium sized manufacturing enterprises (SMEs) are challenged with the task of producing customized products in a timely and cost-effective manner. Winning competitive advantage is an imperative strategy for SMEs to compete with large sized organizations. The purpose of this research is to establish a Web oriented system to help SMEs to gain a competitive position with particular focus on the issues of product life cycle, supplier selection and product design specification. This is achieved by integrating three models, including Customer-Manufacturer-Competitor Orientation Analysis, Strategy-Position based Supplier Selection, and Component Based Partial Product Design Specification, into the system with the support of Web techniques including Enterprise Java Beans (EJB), JSP, Java Servlet, Java application, etc.

2014 ◽  
Vol 697 ◽  
pp. 516-519
Author(s):  
Xi Yin Lou

Green electromechanical product is the core which protects the environment and resources. Design for disassembly is the main content of green electromechanical product design. Traditional electromechanical product design is chief considerations the effective use of assembly and material. It is not consideration the waste processing, and is an open-loop system. When it creates wealth for the mankind, electromechanical product produce a lot of wastes, and Cause a large number of resources waste. At present, the waste disposal costs are more increasing. Mechanical manufacturing enterprises have pay attention to effectively implement the recycling and reuse of materials. Green m electromechanical product disassembly is an important content of green design. In the product design stage, enterprise must put disassembly as design objective, considers product future reuse, efforts to improve the mechanical parts of the disassembly rate, form a mechanical product life cycle in closed-loop system. In this way, enterprises not only can save materials and energy, but also can reduce the pollution of environment.


2009 ◽  
Vol 06 (03) ◽  
pp. 265-282 ◽  
Author(s):  
KATHRYN CORMICAN ◽  
MICHAEL O'CONNOR

This paper examines the logistical and operational issues relating to technology transfer. It documents the specific problems encountered as well as the solution designed to overcome these problems. The paper presents a model for technology transfer that incorporates a sequence of stages or steps that should be considered when planning, scheduling and executing a transfer from one location to another. The model ensures that roles are clarified, appropriate training is undertaken, validation processes are considered, supply to the market is maintained and all relevant information and equipment is transferred in a controlled, timely and cost effective manner.


Author(s):  
W.J. Parker ◽  
N.M. Shadbolt ◽  
D.I. Gray

Three levels of planning can be distinguished in grassland farming: strategic, tactical and operational. The purpose of strategic planning is to achieve a sustainable long-term fit of the farm business with its physical, social and financial environment. In pastoral farming, this essentially means developing plans that maximise and best match pasture growth with animal demand, while generating sufficient income to maintain or enhance farm resources and improvements, and attain personal and financial goals. Strategic plans relate to the whole farm business and are focused on the means to achieve future needs. They should be routinely (at least annually) reviewed and monitored for effectiveness through key performance indicators (e.g., Economic Farm Surplus) that enable progress toward goals to be measured in a timely and cost-effective manner. Failure to link strategy with control is likely to result in unfulfilled plans. Keywords: management, performance


Nanomaterials ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 186
Author(s):  
Jia-Huan Qu ◽  
Karen Leirs ◽  
Remei Escudero ◽  
Žiga Strmšek ◽  
Roman Jerala ◽  
...  

To date, surface plasmon resonance (SPR) biosensors have been exploited in numerous different contexts while continuously pushing boundaries in terms of improved sensitivity, specificity, portability and reusability. The latter has attracted attention as a viable alternative to disposable biosensors, also offering prospects for rapid screening of biomolecules or biomolecular interactions. In this context here, we developed an approach to successfully regenerate a fiber-optic (FO)-SPR surface when utilizing cobalt (II)-nitrilotriacetic acid (NTA) surface chemistry. To achieve this, we tested multiple regeneration conditions that can disrupt the NTA chelate on a surface fully saturated with His6-tagged antibody fragments (scFv-33H1F7) over ten regeneration cycles. The best surface regeneration was obtained when combining 100 mM EDTA, 500 mM imidazole and 0.5% SDS at pH 8.0 for 1 min with shaking at 150 rpm followed by washing with 0.5 M NaOH for 3 min. The true versatility of the established approach was proven by regenerating the NTA surface for ten cycles with three other model system bioreceptors, different in their size and structure: His6-tagged SARS-CoV-2 spike fragment (receptor binding domain, RBD), a red fluorescent protein (RFP) and protein origami carrying 4 RFPs (Tet12SN-RRRR). Enabling the removal of His6-tagged bioreceptors from NTA surfaces in a fast and cost-effective manner can have broad applications, spanning from the development of biosensors and various biopharmaceutical analyses to the synthesis of novel biomaterials.


2020 ◽  
Vol 26 (1) ◽  
Author(s):  
Mohammed S. ElSheemy

Abstract Background Postnatal management of infants with antenatal hydronephrosis (ANH) is still one of the most controversial issues. The majority of infants with ANH are asymptomatic with only few children who develop renal insufficiency. Thus, the biggest challenge for pediatric urologists is to distinguish children who will require further investigations and possible intervention prior to the development of symptoms, complications or renal damage in a cost effective manner without exposing them to the hazards of unnecessary investigations. Main body In this review article, literature on ANH were reviewed to present the current suggestions, recommendations, guidelines and their rational for postnatal management of ANH. It is agreed that a large portion of infants with ANH will improve; thus, the protocol of management is based mainly on observation and follow-up by ultrasound to detect either resolution, stabilization or worsening of hydronephrosis. The first 2 years of life are critical for this follow-up as the final picture is mostly reached during that period. Advanced imaging using voiding cystourethrography or renal scintigraphy are required for children at risk. Then, surgical intervention is selected only for a subgroup of these infants who showed worsening of hydronephrosis or renal function. Conclusions The protocol of management is based mainly on observation and follow-up by US to detect either resolution, stabilization or worsening of hydronephrosis. Postnatal evaluation should be performed for any neonate with a history ANH at any stage during pregnancy even if it was resolved during third trimester. Exclusion of UTI should be performed by urinalysis for all cases followed by urine culture if indicated. Serum creatinine should be performed especially in patients with bilateral ANH. US is the initial standard diagnostic imaging technique. Other imaging modalities like VCUG and nuclear renal scans may be required according to the results of the US evaluation. The most important items in decision making are the presence of bilateral or unilateral hydronephrosis, presence or absence of hydroureter, presence of lower urinary tract obstruction and degree of hydronephrosis on the initial postnatal US. Then an intervention is selected only for a subgroup of these patients who showed deterioration in renal function or degree of hydronephrosis or were complicated by UTIs. All these recommendations are based on the available literature. However, management of ANH is still a controversial issue due to lack of high evidence-based recommendations. Randomised controlled studies are still needed to provide a high level evidence for different aspects of management.


Nutrients ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 1635
Author(s):  
Sweeny Chauhan ◽  
Alish Kerr ◽  
Brian Keogh ◽  
Stephanie Nolan ◽  
Rory Casey ◽  
...  

The prevalence of prediabetes is rapidly increasing, and this can lead to an increased risk for individuals to develop type 2 diabetes and associated diseases. Therefore, it is necessary to develop nutritional strategies to maintain healthy glucose levels and prevent glucose metabolism dysregulation in the general population. Functional ingredients offer great potential for the prevention of various health conditions, including blood glucose regulation, in a cost-effective manner. Using an artificial intelligence (AI) approach, a functional ingredient, NRT_N0G5IJ, was predicted and produced from Pisum sativum (pea) protein by hydrolysis and then validated. Treatment of human skeletal muscle cells with NRT_N0G5IJ significantly increased glucose uptake, indicating efficacy of this ingredient in vitro. When db/db diabetic mice were treated with NRT_N0G5IJ, we observed a significant reduction in glycated haemoglobin (HbA1c) levels and a concomitant benefit on fasting glucose. A pilot double-blinded, placebo controlled human trial in a population of healthy individuals with elevated HbA1c (5.6% to 6.4%) showed that HbA1c percentage was significantly reduced when NRT_N0G5IJ was supplemented in the diet over a 12-week period. Here, we provide evidence of an AI approach to discovery and demonstrate that a functional ingredient identified using this technology could be used as a supplement to maintain healthy glucose regulation.


Author(s):  
Lorenzo Cotrozzi

AbstractSustainable forest management is essential to confront the detrimental impacts of diseases on forest ecosystems. This review highlights the potential of vegetation spectroscopy in improving the feasibility of assessing forest disturbances induced by diseases in a timely and cost-effective manner. The basic concepts of vegetation spectroscopy and its application in phytopathology are first outlined then the literature on the topic is discussed. Using several optical sensors from leaf to landscape-level, a number of forest diseases characterized by variable pathogenic processes have been detected, identified and quantified in many country sites worldwide. Overall, these reviewed studies have pointed out the green and red regions of the visible spectrum, the red-edge and the early near-infrared as the spectral regions most sensitive to the disease development as they are mostly related to chlorophyll changes and symptom development. Late disease conditions particularly affect the shortwave-infrared region, mostly related to water content. This review also highlights some major issues to be addressed such as the need to explore other major forest diseases and geographic areas, to further develop hyperspectral sensors for early detection and discrimination of forest disturbances, to improve devices for remote sensing, to implement long-term monitoring, and to advance algorithms for exploitation of spectral data. Achieving of these goals will enhance the capability of vegetation spectroscopy in early detection of forest stress and in managing forest diseases.


2001 ◽  
Vol 1 ◽  
pp. 953-957 ◽  
Author(s):  
Stephanie Benkovic ◽  
Joseph Kruger

The use of emissions trading (cap and trade) is gaining worldwide recognition as an extremely effective policy tool. The U.S. Sulfur Dioxide (SO2) Emissions Trading Program has achieved an unprecedented level of environmental protection in a cost-effective manner. The successful results of the program have led domestic and foreign governments to consider the application of cap and trade to address other air quality issues. Certain analyses are particularly important in determining whether or not cap and trade is an appropriate policy tool. This paper offers a set of questions that can be used as criteria for determining whether or not cap and trade is the preferred policy approach to an environmental problem.


1996 ◽  
Vol 76 (1) ◽  
pp. 117-128 ◽  
Author(s):  
Rocco Orlando ◽  
John C. Russell

Sign in / Sign up

Export Citation Format

Share Document