Development and Application of Super-Hard Cutter Material

2011 ◽  
Vol 480-481 ◽  
pp. 676-680 ◽  
Author(s):  
Ji Bao Liu ◽  
Zheng Fang Shi ◽  
Xiao Jing Li ◽  
Di Wang
Keyword(s):  
Boron Nitride ◽  
Surface Quality ◽  
Material Properties ◽  
High Speed ◽  
High Stability ◽  
Cubic Boron Nitride ◽  
Polycrystalline Diamond ◽  
Cutting Process ◽  
High Speed Cutting ◽  
Finished Surface

The CIMS development and the high-speed cutting has given a higher demands on cutter performance. It is an tremendous tendency of studying excellent wearing resistance and high stability. PCD (polycrystalline diamond) and PCBN (poly cubic boron nitride) can obtain more higher finished surface quality, which cannot acquire by regular cutting process. This study introduces super-hard cutters materials (PCD and PCBN) development, and discusses two kinds of material properties, The features of them used in different cutting fields are given.

Application and Advance in Super-Hard Tool Material

2011 ◽  
Vol 84-85 ◽  
pp. 228-231
Author(s):  
Jing Su ◽  
Yu Hua Zhang ◽  
Di Wang
Keyword(s):  
High Speed ◽  
High Performance ◽  
Cubic Boron Nitride ◽  
Tool Material ◽  
Polycrystalline Diamond ◽  
High Speed Cutting ◽  
Machining Quality ◽  
Finished Surface ◽  
Materials Used ◽  
Surface Precision

For the excellent properties, super-hard tool material has received much attention from researchers. The development of super-hard tool material for high-speed cutting could brought high machining quality and surface precision. For an engineer, adopt high performance of tool material, for example wearing resistance, high stability of PCD (polycrystalline diamond) and PCBN (poly cubic boron nitride) can get more information for obtaining higher finished surface quality that cannot acquire just by common cutting process. This paper introduces super-hard cutters materials (PCD and PCBN) development, and discusses several material properties. The features of materials used in different cutting fields are given.

Development of Super-Hard Cutter Material

2013 ◽  
Vol 341-342 ◽  
pp. 3-7
Author(s):  
Hui Ying Feng ◽  
Xiao Jing Li
Keyword(s):  
High Speed ◽  
Cubic Boron Nitride ◽  
Tool Material ◽  
Polycrystalline Diamond ◽  
Machining Process ◽  
Main Research ◽  
High Speed Cutting ◽  
Finished Surface ◽  
Materials Used ◽  
Surface Precision

Super-hard tool material is a main research point of mechanical engineering because of excellent performance. The development of technology for high-speed cutting process could enhance the machining quality and surface precision. It is a difficulty thing to get higher finished surface for traditional machining process. However, the super-hard cutter material could enhance the finished performance of tool material. For example, the wearing resistance, high stability of PCD (polycrystalline diamond) and PCBN (poly cubic boron nitride) can get more information for obtaining higher finished surface quality. The author introduces super-hard cutters materials (PCD and PCBN) development, and discusses several material properties. The features of materials used in different cutting fields are discussed.

High-Speed Finishing of Hard Gear Teeth with cBN-Tipped Hob

2008 ◽  
Vol 2 (5) ◽  
pp. 348-353 ◽  
Author(s):  
Yoji Umezaki ◽  
◽  
Yasutsune Ariura ◽  
Toshio Suzuki ◽  
Ryohei Ishimaru ◽  
...  
Keyword(s):  
Surface Properties ◽  
High Speed ◽  
High Efficiency ◽  
Cubic Boron Nitride ◽  
Cutting Temperature ◽  
Cutting Edge ◽  
Wear Properties ◽  
High Speed Cutting ◽  
Gear Teeth ◽  
Finished Surface

The hobbing finish of hard gear teeth such as case-hardened gears is anticipated for practical use in high efficiency production. We studied wear and finished surface properties in cutting tests using a cubic boron nitride (cBN) hob cutter in high-speed cutting at 900 m/min of case-hardened steel. The cBN content in tip ingredients is related to wear, and tips high in cBN content are superior in wear resistance. The high thermal conductivity of cBN tips helps transfer cutting temperature heat to chips, melting and adhering them to the relief surface. Flaking may occur on the cutting edge but new chipping does not occur although chipping may exist after grinding. Finished surface roughness is influenced by horning on the cutting edge. Round horning leads to a smooth surface. High-speed finishing with cBN-tipped hobs is analyzed in view of cBN tip grinding and finished surface properties, in addition to wear properties.

Wear Characteristics of Binder-Less Nano-Polycrystalline Diamond and Cubic Boron Nitride

2014 ◽  
Vol 1017 ◽  
pp. 406-410 ◽  
Author(s):  
Hitoshi Sumiya ◽  
Katsuko Harano
Keyword(s):  
Boron Nitride ◽  
Chemical Reaction ◽  
High Speed ◽  
Single Phase ◽  
Cubic Boron Nitride ◽  
Polycrystalline Diamond ◽  
Wear Characteristics ◽  
Wear Process ◽  
Wear Rates ◽  
Starting Condition

Wear characteristics of binder-less (single-phase) nanopolycrystalline diamond (NPD) and cubic boron nitride (BL-PcBN) were investigated by rubbing them against various ceramics such as SiO2, Si3N4, Al2O3 and SiC. The wear rates of NPD and BL-PcBN against SiO2 and Si3N4 at high speed rubbing (280-360 m/min) at a loading pressure of 55 MPa (starting condition) were considerably high, indicating the main wear process is a chemical reaction. BL-PcBN specimens were found to be worn at much higher (more than ten times) rates than NPD, suggesting that cBN highly reacts with these ceramics in comparison with diamond under the experiment condition.

scholarly journals Experimental study of single cubic boron nitride grains in the ultrasound-assisted high-speed grinding

2017 ◽  
Vol 9 (2) ◽  
pp. 168781401769354 ◽  
Author(s):  
Dao-hui Xiang ◽  
Zhong-yun Liu ◽  
Zhi-kun Zhou ◽  
Yun-long Yao
Keyword(s):  
Experimental Study ◽  
Boron Nitride ◽  
Surface Quality ◽  
High Speed ◽  
Cubic Boron Nitride ◽  
Grinding Force ◽  
Abrasive Particles ◽  
Ultrasonic Assisted ◽  
High Speed Grinding

The kinematic characteristics, grinding force, surface quality of workpiece surface, and wear of abrasive particles were studied by theoretical analysis and experimental study on the single cubic boron nitride abrasive particles under ultrasonic-assisted high-speed grinding. Under the condition of the same grinding parameters, the motion characteristics and the grinding forces of the two machining modes of general grinding and ultrasonic-assisted grinding are compared and analyzed. Research shows that the ultrasonic vibration is applied in the common external circular grinding on grinding particle movement characteristics changed obviously, grinding particle trajectory of variable length, cutting groove width wider, thereby improving the grinding efficiency and the grinding removal rate; ultrasonic assisted under high speed grinding, the grinding force is higher than that of common grinding force is small, efficiency of grinding under ultrasonic processing mode is much higher than ordinary grinding, the surface quality of the workpiece has improved markedly.

scholarly journals Surface quality of high-speed cutting plates in flat grinding by new abrasive wheels of “Saint-Gobain Abrasive” company

2020 ◽  
Vol 971 ◽  
pp. 022077
Author(s):  
Nguyen Duy Canh ◽  
Nguyen Van Canh ◽  
Pham Xuan Hong ◽  
Nguyen Ngoc Hue ◽  
Tran Dinh Duy
Keyword(s):  
Surface Quality ◽  
High Speed ◽  
High Speed Cutting

Automation of calculations of cutting modes taking into account the wear of cubic boron nitride tools when applying solid lubricants

2021 ◽  
pp. 67-70
Author(s):  
Keyword(s):  
Boron Nitride ◽  
High Speed ◽  
Solid Lubricant ◽  
Cubic Boron Nitride ◽  
High Speed Steel ◽  
Solid Lubricants ◽  
Grinding Wheel ◽  
Grinding Wheels ◽  
Ceramic Bond ◽  
Calculation System

The effect of a solid lubricant on the wear of cubic boron nitride grinding wheels on a ceramic bond of different hardness and grain size in the processing of high-speed steel is investigated. The dependences of the change in the wear of cubic boron nitride on the parameters of the processing mode are determined. An automated calculation system is proposed to control the consumption of cubic boron nitride grinding wheels in production conditions. Keywords: solid lubricant, grinding, high speed steel, cubic boron nitride grinding wheel, consumption, wear, grinding mode. [email protected]

Sign in / Sign up

Export Citation Format

Share Document