High-Speed Finishing of Hard Gear Teeth with cBN-Tipped Hob

2008 ◽  
Vol 2 (5) ◽  
pp. 348-353 ◽  
Author(s):  
Yoji Umezaki ◽  
◽  
Yasutsune Ariura ◽  
Toshio Suzuki ◽  
Ryohei Ishimaru ◽  
...  
Keyword(s):  
Surface Properties ◽  
High Speed ◽  
High Efficiency ◽  
Cubic Boron Nitride ◽  
Cutting Temperature ◽  
Cutting Edge ◽  
Wear Properties ◽  
High Speed Cutting ◽  
Gear Teeth ◽  
Finished Surface

The hobbing finish of hard gear teeth such as case-hardened gears is anticipated for practical use in high efficiency production. We studied wear and finished surface properties in cutting tests using a cubic boron nitride (cBN) hob cutter in high-speed cutting at 900 m/min of case-hardened steel. The cBN content in tip ingredients is related to wear, and tips high in cBN content are superior in wear resistance. The high thermal conductivity of cBN tips helps transfer cutting temperature heat to chips, melting and adhering them to the relief surface. Flaking may occur on the cutting edge but new chipping does not occur although chipping may exist after grinding. Finished surface roughness is influenced by horning on the cutting edge. Round horning leads to a smooth surface. High-speed finishing with cBN-tipped hobs is analyzed in view of cBN tip grinding and finished surface properties, in addition to wear properties.

Application and Advance in Super-Hard Tool Material

2011 ◽  
Vol 84-85 ◽  
pp. 228-231
Author(s):  
Jing Su ◽  
Yu Hua Zhang ◽  
Di Wang
Keyword(s):  
High Speed ◽  
High Performance ◽  
Cubic Boron Nitride ◽  
Tool Material ◽  
Polycrystalline Diamond ◽  
High Speed Cutting ◽  
Machining Quality ◽  
Finished Surface ◽  
Materials Used ◽  
Surface Precision

For the excellent properties, super-hard tool material has received much attention from researchers. The development of super-hard tool material for high-speed cutting could brought high machining quality and surface precision. For an engineer, adopt high performance of tool material, for example wearing resistance, high stability of PCD (polycrystalline diamond) and PCBN (poly cubic boron nitride) can get more information for obtaining higher finished surface quality that cannot acquire just by common cutting process. This paper introduces super-hard cutters materials (PCD and PCBN) development, and discusses several material properties. The features of materials used in different cutting fields are given.

Development of Super-Hard Cutter Material

2013 ◽  
Vol 341-342 ◽  
pp. 3-7
Author(s):  
Hui Ying Feng ◽  
Xiao Jing Li
Keyword(s):  
High Speed ◽  
Cubic Boron Nitride ◽  
Tool Material ◽  
Polycrystalline Diamond ◽  
Machining Process ◽  
Main Research ◽  
High Speed Cutting ◽  
Finished Surface ◽  
Materials Used ◽  
Surface Precision

Super-hard tool material is a main research point of mechanical engineering because of excellent performance. The development of technology for high-speed cutting process could enhance the machining quality and surface precision. It is a difficulty thing to get higher finished surface for traditional machining process. However, the super-hard cutter material could enhance the finished performance of tool material. For example, the wearing resistance, high stability of PCD (polycrystalline diamond) and PCBN (poly cubic boron nitride) can get more information for obtaining higher finished surface quality. The author introduces super-hard cutters materials (PCD and PCBN) development, and discusses several material properties. The features of materials used in different cutting fields are discussed.

The Investigation of Tool Wear in High Speed Cutting INCONEL718

2010 ◽  
Vol 33 ◽  
pp. 347-350
Author(s):  
J. Zhou ◽  
R.D. Han
Keyword(s):  
Surface Roughness ◽  
Tool Wear ◽  
Cutting Force ◽  
High Speed ◽  
High Efficiency ◽  
Cutting Tool ◽  
Cutting Temperature ◽  
Main Method ◽  
High Speed Cutting ◽  
Cutting Tool Wear

As the main method of high efficiency machining Ni-based superalloy, high-speed cutting can not but intensify the cutting-tool wear. So, it is very necessary to find the rule of cutting-tool wear in high-speed cutting superalloy, especially, the effect of cutting-tool wear on the cutting force, cutting temperature and surface roughness of machined workpiece. In this paper, the PCDTiAlN cemented carbide insert is used in the experiment, the value of cutting-tool wear and the corresponding cutting force, cutting temperature and surface roughness of machined workpiece is measured. It indicates that the cutting force, cutting temperature and surface roughness of machined workpiece is changed corresponding the cutting-tool wear changes, and cutting-tool is serious, for example, the crater wear expands quickly; the boundary wear is obvious.

Study on High Speed Cutting Technology for Green Manufacturing

2011 ◽  
Vol 305 ◽  
pp. 25-30 ◽  
Author(s):  
Xiao Jun Wang ◽  
Wen Hui Yue ◽  
Zi Qiang Han
Keyword(s):  
High Speed ◽  
Manufacturing Industry ◽  
High Efficiency ◽  
Low Cost ◽  
Cutting Temperature ◽  
Green Manufacturing ◽  
Processing Parameters ◽  
High Speed Machining ◽  
High Speed Cutting ◽  
Manufacturing Technologies

As a sustainable model of modern manufacturing industry, green manufacturing is one of the essential solutions of the manufacturing environment pollution problems. Green cutting technology is the base and key of green manufacturing and will be the inevitable trend of cutting technology. High speed machining technology is a kind of the advanced manufacturing technologies which have superiorities as low cost, high efficiency, good processing quality and are suitable for machining thin walled workpieces and difficult-to-cut materials, and the relative problem has attracted scholars' attention from all over the world. From the perspective of green manufacturing, research results of high speed machining hardened steels are reviewed, including cutting force, cutting temperature, selection and optimization of processing parameters and machining quality, and conclude that high speed cutting is one of the key technologies in implementing green manufacturing and cleaner production. Finally, its future works of the research are discussed.

Development and Application of Super-Hard Cutter Material

2011 ◽  
Vol 480-481 ◽  
pp. 676-680 ◽  
Author(s):  
Ji Bao Liu ◽  
Zheng Fang Shi ◽  
Xiao Jing Li ◽  
Di Wang
Keyword(s):  
Boron Nitride ◽  
Surface Quality ◽  
Material Properties ◽  
High Speed ◽  
High Stability ◽  
Cubic Boron Nitride ◽  
Polycrystalline Diamond ◽  
Cutting Process ◽  
High Speed Cutting ◽  
Finished Surface

The CIMS development and the high-speed cutting has given a higher demands on cutter performance. It is an tremendous tendency of studying excellent wearing resistance and high stability. PCD (polycrystalline diamond) and PCBN (poly cubic boron nitride) can obtain more higher finished surface quality, which cannot acquire by regular cutting process. This study introduces super-hard cutters materials (PCD and PCBN) development, and discusses two kinds of material properties, The features of them used in different cutting fields are given.

Finite Element Simulation on High Speed Cutting of Hardened 45 Steel Based on ABAQUS

2013 ◽  
Vol 579-580 ◽  
pp. 202-207
Author(s):  
Guo He Li ◽  
Hou Jun Qi ◽  
Bing Yan
Keyword(s):  
Finite Element ◽  
Cutting Force ◽  
Finite Element Simulation ◽  
High Speed ◽  
Cutting Temperature ◽  
Cutting Parameters ◽  
Cutting Process ◽  
High Speed Cutting ◽  
Geometry Model ◽  
Element Simulation

For the high speed cutting process of hardened 45 steel (45HRC), a finite element simulation of cutting deformation, cutting force and cutting temperature is finished with the large general finite element software ABAQUS. Through the building of geometry model, material model and heat conduction model, also the determination of boundary conditions, separation rule and friction condition, a thermal mechanical coupling finite element model of high speed cutting for hardened 45 steel is built. The serrated chip, cutting force and cutting temperature can be predicted. The comparison of experiment and simulation shows the validity of the model. The influence of cutting parameters on cutting process is investigated by the simulation under different cutting depthes and rake angles. The results show that as the increase of rake angle, the segment degree, cutting force and cutting temperature decrease. But the segment degree, also the cutting force and cutting temperature increase with the increase of cutting depth. This study is useful for the selection of cutting parameters of hardened steel.

An Integral Method to Determine Workpiece Flow Stress and Friction Characteristics in Metal Cutting

2015 ◽  
Vol 9 (6) ◽  
pp. 775-781
Author(s):  
Norfariza Wahab ◽  
◽  
Yumi Inatsugu ◽  
Satoshi Kubota ◽  
Soo-Young Kim ◽  
...  
Keyword(s):  
Flow Stress ◽  
Strain Rate ◽  
Cutting Forces ◽  
High Speed ◽  
Metal Cutting ◽  
Cutting Edge ◽  
Cutting Process ◽  
Machining Parameters ◽  
Friction Characteristics ◽  
High Speed Cutting

In recent times, numerical simulation techniques have been commonly used to estimate and predict machining parameters such as cutting forces, stresses, and temperature distribution. However, it is very difficult to estimate the flow stress of a workpiece and the friction characteristics at a tool/chip interface, particularly during a high-speed cutting process. The objective of this study is to improve the accuracy of the present method and simultaneously determine the characteristics of the flow stress of a workpiece and friction at the cutting edge under a high strain rate and temperature during the cutting process. In this study, the Johnson-Cook (JC) flow stress model is used as a function of strain, strain rate, and temperature. The friction characteristic was estimated by minimizing the difference between the predicted and measured results of principal force, thrust force, and shear angle. The shear friction equation was used to estimate the friction characteristics. Therefore, by comparing the measured values of the cutting forces with the predicted results from FEM simulations, an expression for workpiece flow stress and friction characteristics at the cutting edge during a high-speed cutting process was estimated.

Experiment of Temperature Field for High Speed Orthogonal Turning

2011 ◽  
Vol 117-119 ◽  
pp. 594-597 ◽  
Author(s):  
Mu Lan Wang ◽  
Yong Feng ◽  
Xiao Xia Li ◽  
Bao Sheng Wang
Keyword(s):  
Temperature Field ◽  
High Speed ◽  
Model Simulation ◽  
Cutting Temperature ◽  
Cutting Speed ◽  
Experimental System ◽  
Maximum Temperature ◽  
Fem Model ◽  
High Speed Cutting ◽  
Orthogonal Turning

An experimental system used for temperature measurement is designed by the K-type thermocouple thermometry to achieve a direct measurement of cutting temperature in high speed orthogonal turning. The general regularity of temperature distribution is concluded, and the corresponding influences of cutting speed and cutting depth on the maximum temperature value are discussed in detail. Experimental data and simulating results are comparative analyzed to demonstrate the feasibility and correctness of Finite Element Method (FEM) model simulation and analytical solution. The verified model of temperature field can be applied to develop an effective non-contact soft-sensing method for high speed cutting temperature.

Sign in / Sign up

Export Citation Format

Share Document