Unidirectional Porous β-Tricalcium Phosphate Bone Substitute: Examination of Balance between New Bone Formation and Absorption

2011 ◽  
Vol 493-494 ◽  
pp. 132-134 ◽  
Author(s):  
Masataka Sakane ◽  
T. Tsukanishi ◽  
T. Funayama ◽  
M. Kobayashi ◽  
N. Ochiai

In the present study, we have newly developed an artificial bone substitute, which is unidirectional porous β-tricalcium phosphate (UDPTCP). The objective of this study was to examine the effects of high and low porosity substitutes on the balance between new bone formation and β-TCP absorption. Materials and MethodsSix male Japanese white rabbits (weight 3.1–3.5 kg, approximately 18– 21 weeks old) were used for this study. Intra-venous injection of pent barbiturate was administered and the both medial and lateral femoral condyle were exposed. A hole of 5 mm diameter was drilled to a depth of 12 mm in the metaphysis, perpendicular to the long axis of the femur. (Figure 1) Figure 1. Operation procedureIn the next step, a cylindrical UDPTCP test piece measuring 4.8 × 11 mm was implanted in the holes. Within the bone substitute, unidirectional pores ranging from 100 to 300 μm in diameter were made. This unique architecture fostered transmission of fluids and cells into the piece. In this case, the test piece was implanted into the bone perpendicular to the long axis of the femur, and the orientation of uni-directional pore was parallel to the long axis of femur. We prepared two different test pieces having low (69%) and high (74%) porosities. Half of the animals were sacrificed at 3 weeks after the operation and the remaining half at 6 weeks. After removal of the femoral condyle, the specimen was fixed in formalin and demineralized. Specimens were obtained from the central axis of the cylindrical piece as well as from the lateral or medial surfaces at a distance of 4 mm from midline. The histological samples were prepared for H&E and TRAP staining. Results and Discussion  At 3 weeks interval, woven bone, which was formed along the wall of the substitute, could be observed by H&E staining in both low and high porosity substitutes (Figure 2a, 2b). In addition, there were osteoblast-like cells lining the newly formed bone surface with extensive capillary formation (Figure 3). At 6 weeks, the β-TCP walls had thinned and bone had matured in both the groups (Figure 4a, 4b). However, in the high-porosity group, β-TCP absorption tended to be more prominent (Figure 4). In addition, it was observed that at the center of the piece, β-TCP absorption was more prominent than that in the 4 mm-area obtained from the lateral or medial surfaces. At 3 and 6 weeks interval, activities of osteoclast-like multinuclear cells were seen on the surface of the pore wall as observed by TRAP staining. Figure 2a. Low porosity (69%) Figure 2b. High porosity (74%) Fig.2a and Fig.2b H&E staining (×12.5) after 3 weeks (center of the specimen)Figure 3. Formation of woven bone with osteoblast-like cells lining the low porosity specimen at 3 weeks. (H&E staining ×400) Figure 4a. Low porosity Figure 4b. High porosityFig.4a and Fig. 4b H&E staining at 6 weeks after implantation. In high porosity, dense-pink staining areas are located at peripheral in the field.Figure 5. TRAP-positive multinuclear cells (black arrow) were seen on the wall and in the capillaries.Conclusions The UDPTCP implanted in the medullar canal of the femur was absorbed by multinuclear cells and quickly replaced by the newly formed bone. Our results are consistent with those of other studies using porous β-TCP [1]. In our preparation, porosity had certain effects on the balance between bone formation and β-TCP absorption. Because of the unique architecture of unidirectional pores within the β-TCP specimen as well as easy formation of capillary network and access to osteoclasts may have accelerated absorption of the substitute. UDPTCP is very promising scaffolding material for bone regeneration. However, optimization of the porosity of UDPTCP in accordance with its application site is necessary before its clinical use. Reference[1] Naoki Kondo, Akira Ogose, Kunihiko Tokunaga, Tomoyuki Ito, Katsumitsu Arai, Naoko Kudo, Hikaru Inoue, Hiroyuki Irie, Naoto Endo: Bone formation and resorption of highly purified β-tricalcium phosphate in the rat femoral condyle. Biomaterials 26: 5600-5608, October 2005.

2018 ◽  
Vol 23 (03) ◽  
pp. 424-429 ◽  
Author(s):  
Akira Ikumi ◽  
Toru Funayama ◽  
Toshinori Tsukanishi ◽  
Hiroshi Noguchi ◽  
Masashi Yamazaki

Unidirectional porous β-tricalcium phosphate (UDPTCP; Affinos®, Kuraray, Tokyo, Japan) has been in clinical use since 2015. Animal studies have confirmed the excellent potential of UDPTCP with regard to bone formation and material absorption. We present the first three clinical cases using UDPTCP as a bone substitute after curettage of benign bone tumors of the hand. All three patients were males, 29-, 30- and 81-years-old, two having a diagnosis of enchondroma and the other, a bone ganglion, with a pathological fracture identified in one case. Over a mean follow-up of 10 months, all patients achieved satisfactory clinical result, with no adverse events of UDPTCP noted. Radiographic evidence of good bone formation and material absorption was observable over the postoperative course. UDPTCP provided satisfactory clinical results, with good biocompatibility and fast resorption characteristics. Therefore, UDPTCP could provide a safe and reliable filling substitute for bone defects following curettage of small bone tumors.


2005 ◽  
Vol 284-286 ◽  
pp. 769-774
Author(s):  
Shin Hasegawa ◽  
Jiro Tamura ◽  
Masashi Neo ◽  
Koji Goto ◽  
Yasuo Shikinami ◽  
...  

We investigated the biocompatibility, osteoconductivity, and biodegradability of porous composite of Hydroxyapatite (HA) and Poly D/L-lactide (PDLLA). At 6weeks afterimplantation to rabbit femoral condyle, HA/PDLLA was covered with bone and contacted with bone directly. The amounts of newly formed bone in the pores had increased during the examined period. By 26weeks, bone remodeling of formed bone in the pores was seen and bone marrow tissue formation was seen in the pores of HA/PDLLA. Porous HA/PDLLA was resorbed much faster than porous HA as a control. Porous HA/PDLLA was resorbed constantly through the bone formation and bone remodeling but porous HA was hardly resorbed during the period. It might be one of the desirable materials for bone substitute. To evaluate for a scaffold, disc shaped blocks loaded with rat bone marrow cell were implanted in the subcutaneous pouch of the back of syngeneic rat. At 3weeks afterimplantation, newly bone formation in the pores was observed at ectopic site. It also suggested the availability of this material as cell scaffolds.


Biomaterials ◽  
2005 ◽  
Vol 26 (28) ◽  
pp. 5600-5608 ◽  
Author(s):  
Naoki Kondo ◽  
Akira Ogose ◽  
Kunihiko Tokunaga ◽  
Tomoyuki Ito ◽  
Katsumitsu Arai ◽  
...  

2018 ◽  
Vol 33 (5) ◽  
pp. 662-672
Author(s):  
Seung Min Ryu ◽  
Myun Whan Ahn ◽  
Chul Hyun Park ◽  
Gun Woo Lee ◽  
In Hwan Song ◽  
...  

Background Recently, some authors introduced a water glass (WG, sodium-silicate glass; Na2O·SiO2·nH2O) coating over tricalcium phosphate (TCP) bioceramic to modulate its resorption rate and enhance the bone cell behaviors. In this study, four different types of granular samples were prepared to evaluate the ability of new bone formation in vivo using micro-computed tomography and histology. Methods Four types sample groups: group A (pure HA as a negative resorption control); group B (pure TCP as a positive resorption control); group C (WG-coated TCP as an early resorption model); and group D (same as group C but heat-treated at 500°C as a delayed resorption model). Cylindrical tube-type carriers with holes were fabricated with HA by extrusion and sintering. Each carrier was filled densely with each granular sample. Four types of tubes were implanted into the medial femoral condyle and medial tibial condyle of New Zealand White rabbits. Results The HA group (A) showed the lowest amount of new bone formation. All the TCP sample groups (B, C, and D) showed more new bone formation. On the other hand, among the TCP groups, group C (early resorption model) showed slightly more bone formation. The amount of residual bioceramics was most abundant in the HA group (A). All the TCP sample groups showed less residual bioceramics than group A. Among the TCP groups, group C showed slightly more residual bioceramics. Group B showed the lowest amount of residual bioceramics. Conclusions The WG-coated TCP sample (group C) is the best bone substitute candidate because of its proper biodegradation rate and the Si ions release because the WG-coated layer reduces the material resorption and enhances the new bone formation. That is, the WG-coated TCP is believed to be the best material for the application of an artificial bone substitute material.


2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Pei-I Tsai ◽  
Meng-Huang Wu ◽  
Yen-Yao Li ◽  
Tzu-Hung Lin ◽  
Jane S. C. Tsai ◽  
...  

Abstract Background We developed a porous Ti alloy/PEEK composite interbody cage by utilizing the advantages of polyetheretherketone (PEEK) and titanium alloy (Ti alloy) in combination with additive manufacturing technology. Methods Porous Ti alloy/PEEK composite cages were manufactured using various controlled porosities. Anterior intervertebral lumbar fusion and posterior augmentation were performed at three vertebral levels on 20 female pigs. Each level was randomly implanted with one of the five cages that were tested: a commercialized pure PEEK cage, a Ti alloy/PEEK composite cage with nonporous Ti alloy endplates, and three composite cages with porosities of 40, 60, and 80%, respectively. Micro-computed tomography (CT), backscattered-electron SEM (BSE-SEM), and histological analyses were performed. Results Micro-CT and histological analyses revealed improved bone growth in high-porosity groups. Micro-CT and BSE-SEM demonstrated that structures with high porosities, especially 60 and 80%, facilitated more bone formation inside the implant but not outside the implant. Histological analysis also showed that bone formation was higher in Ti alloy groups than in the PEEK group. Conclusion The composite cage presents the biological advantages of Ti alloy porous endplates and the mechanical and radiographic advantages of the PEEK central core, which makes it suitable for use as a single implant for intervertebral fusion.


Biomedicines ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 952
Author(s):  
Fabien Bornert ◽  
François Clauss ◽  
Guoqiang Hua ◽  
Ysia Idoux-Gillet ◽  
Laetitia Keller ◽  
...  

One major limitation for the vascularization of bone substitutes used for filling is the presence of mineral blocks. The newly-formed blood vessels are stopped or have to circumvent the mineral blocks, resulting in inefficient delivery of oxygen and nutrients to the implant. This leads to necrosis within the implant and to poor engraftment of the bone substitute. The aim of the present study is to provide a bone substitute currently used in the clinic with suitably guided vascularization properties. This therapeutic hybrid bone filling, containing a mineral and a polymeric component, is fortified with pro-angiogenic smart nano-therapeutics that allow the release of angiogenic molecules. Our data showed that the improved vasculature within the implant promoted new bone formation and that the newly-formed bone swapped the mineral blocks of the bone substitutes much more efficiently than in non-functionalized bone substitutes. Therefore, we demonstrated that our therapeutic bone substitute is an advanced therapeutical medicinal product, with great potential to recuperate and guide vascularization that is stopped by mineral blocks, and can improve the regeneration of critical-sized bone defects. We have also elucidated the mechanism to understand how the newly-formed vessels can no longer encounter mineral blocks and pursue their course of vasculature, giving our advanced therapeutical bone filling great potential to be used in many applications, by combining filling and nano-regenerative medicine that currently fall short because of problems related to the lack of oxygen and nutrients.


2008 ◽  
Vol 396-398 ◽  
pp. 7-10 ◽  
Author(s):  
Ana Maria Minarelli Gaspar ◽  
Sybele Saska ◽  
R. García Carrodeguas ◽  
A.H. De Aza ◽  
P. Pena ◽  
...  

The biological response following subcutaneous and bone implantation of β-wollastonite(β-W)-doped α-tricalcium phosphate bioceramics in rats was evaluated. Tested materials were: tricalcium phosphate (TCP), consisting of a mixture of α- and β-polymorphs; TCP doped with 5 wt. % of β-W (TCP5W), composed of α-TCP as only crystalline phase; and TCP doped with 15 wt. % of β-W (TCP15), containing crystalline α-TCP and β-W. Cylinders of 2x1 mm were implanted in tibiae and backs of adult male Rattus norvegicus, Holtzman rats. After 7, 30 and 120 days, animals were sacrificed and the tissue blocks containing the implants were excised, fixed and processed for histological examination. TCP, TCP5W and TCP15W implants were biocompatible but neither bioactive nor biodegradable in rat subcutaneous tissue. They were not osteoinductive in connective tissue either. However, in rat bone tissue β-W-doped α-TCP implants (TCP5W and TCP15W) were bioactive, biodegradable and osteoconductive. The rates of biodegradation and new bone formation observed for TCP5W and TCP15W implants in rat bone tissue were greater than for non-doped TCP.


Sign in / Sign up

Export Citation Format

Share Document