Motion Control for a Stingray-Like Robotic Fish with Undulating Pectoral Fins

2014 ◽  
Vol 620 ◽  
pp. 502-507
Author(s):  
Yang Wei Wang ◽  
Bao Tong Gu ◽  
Jin Bo Tan ◽  
Peng Fei Sang
Keyword(s):  
Control System ◽  
Motion Control ◽  
Control Strategies ◽  
Robotic Fish ◽  
Entire Length ◽  
Water Tank ◽  
Control Methods ◽  
Pectoral Fin ◽  
Pectoral Fins ◽  
Undulating Fin

Stingrays have expanded and highly flexible pectoral fins that extend over the entire length of their body. Locomotion is controlled by modulations of the undulating fin surface which produce steady swimming, acceleration, or complex maneuvers. In this paper, a robotic fish inspired by stingray was presented. Structure of the biomimetic prototype and layout of the control system were illustrated. In order to mimic the undulations, parameters of the biomimetic pectoral fin need to be accurately controlled including frequency, amplitude, wavelength, and undulatory mode. Several control strategies were proposed to realize different kinds of locomotion. Lastly, swimming experiments were carried out in the water tank according to the control methods. Experiment results demonstrate the viability of our methods.

A biomimetic cownose ray robot fish with oscillating and chordwise twisting flexible pectoral fins

2015 ◽  
Vol 42 (3) ◽  
pp. 214-221 ◽  
Author(s):  
Hongwei Ma ◽  
Yueri Cai ◽  
Yuliang Wang ◽  
Shusheng Bi ◽  
Zhao Gong
Keyword(s):  
Swimming Performance ◽  
Robotic Fish ◽  
Small Radius ◽  
Water Tank ◽  
Pectoral Fin ◽  
Content Type ◽  
Pectoral Fins ◽  
Propulsion Performance ◽  
Cownose Ray ◽  
And Control

Purpose The paper aims to develop a cownose ray-inspired robotic fish which can be propelled by oscillating and chordwise twisting pectoral fins. Design/methodology/approach The bionic pectoral fin which can simultaneously realize the combination of oscillating motion and chordwise twisting motion is designed based on analyzing the movement of cownose ray’s pectoral fins. The structural design and control system construction of the robotic fish are presented. Finally, a series of swimming experiments are carried out to verify the effectiveness of the design for the bionic pectoral fin. Findings The experimental results show that the deformation of the bionic pectoral fin can be well close to that of the cownose ray’s. The bionic pectoral fin can produce effective angle of attack, and the thrust generated can propel robotic fish effectively. Furthermore, the tests of swimming performance in the water tank show that the robotic fish can achieve a maximum forward speed of 0.43 m/s (0.94 times of body length per second) and an excellent turning maneuverability with a small radius. Originality/value The oscillating and pitching motion can be obtained simultaneously by the active control of chordwise twisting motion of the bionic pectoral fin, which can better imitate the movement of cownose ray’s pectoral fin. The designed bionic pectoral fin can provide an experimental platform for further study of the effect of the spanwise and chordwise flexibility on propulsion performance.

Design and Dynamic Modeling of a Flexible Feathering Joint for Robotic Fish Pectoral Fins

2014 ◽  
Author(s):  
Sanaz Bazaz Behbahani ◽  
Xiaobo Tan
Keyword(s):  
Dynamic Model ◽  
Robotic Fish ◽  
Power Stroke ◽  
Hydrodynamic Drag ◽  
Pectoral Fin ◽  
Flexible Joint ◽  
Blade Element Theory ◽  
Pectoral Fins ◽  
Flexible Part ◽  
Recovery Stroke

In this paper, we propose a novel design for a pectoral fin joint of a robotic fish. This joint uses a flexible part to enable the rowing pectoral fin to feather passively and thus reduce the hydrodynamic drag in the recovery stroke. On the other hand, a mechanical stopper allows the fin to maintain its motion prescribed by the servomotor in the power stroke. The design results in net thrust even when the fin is actuated symmetrically for the power and recovery strokes. A dynamic model for this joint and for a pectoral fin-actuated robotic fish involving such joints is presented. The pectoral fin is modeled as a rigid plate connected to the servo arm through a pair of torsional spring and damper that describes the flexible joint. The hydrodynamic force on the fin is evaluated with blade element theory, where all three components of the force are considered due to the feathering degree of freedom of the fin. Experimental results on robotic fish prototype are provided to support the effectiveness of the design and the presented dynamic model. We utilize three different joints (with different sizes and different flexible materials), produced with a multi-material 3D printer, and measure the feathering angles of the joints and the forward swimming velocities of the robotic fish. Good match between the model predictions and experimental data is achieved, and the advantage of the proposed flexible joint over a rigid joint, where the power and recovery strokes have to be actuated at different speeds to produce thrust, is demonstrated.

Research on the influence of ground effect on the performance of robotic fish propelled by oscillating paired pectoral fins

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Hongwei Ma ◽  
Shuai Ren ◽  
Junxiang Wang ◽  
Hui Ren ◽  
Yang Liu ◽  
...  
Keyword(s):  
Ground Effect ◽  
Robotic Fish ◽  
Two Dimensional ◽  
Pectoral Fin ◽  
Content Type ◽  
Pectoral Fins ◽  
Propulsion Performance ◽  
Effect Model ◽  
Hydrodynamic Experiments ◽  
Flexible Deformation

Purpose This paper aims to carry out the research on the influence of ground effect on the performance of robotic fish propelled by oscillating paired pectoral fins. Design/methodology/approach The two-dimensional ground effect model of the oscillating pectoral fin without considering flexible deformation is established by introducing a two-dimensional fluid ground effect model. The parameters of the influence of ground effect on the oscillating pectoral fin are analyzed. Finally, the ground effect test platform is built, and a series of hydrodynamic experiments are carried out to study the influence of ground effect on the propulsion performance of the robotic fish propelled by oscillating paired pectoral fins under different motion parameters. Findings The thickness of the trailing edge and effective clearance are two important parameters that can change the influence of ground effect on the rigid pectoral fin. The experimental results are consistent with that obtained through theoretical analysis within a certain extent, which indicates that the developed two-dimensional ground effect model in this paper can be used to analyze the influence of ground effect on the propulsion performance of the oscillating pectoral fin. The experiment results show that the average thrust increases with the decreasing distance between the robot fish and the bottom. Meanwhile, with the increase of oscillation frequency and amplitude, the average thrust increases gradually. Originality/value The developed two-dimensional ground effect model provides the theoretical basis for the further research on the influence of ground effect on the propulsion performance of the oscillating pectoral fin. It can also be used in the design of the bionic pectoral fins.

Discussion on the Garbage Disposal Control System Based on DCS

2012 ◽  
Vol 229-231 ◽  
pp. 2188-2191
Author(s):  
Mei Xu
Keyword(s):  
Complex System ◽  
Control System ◽  
Control Problem ◽  
Intelligent Control ◽  
Control Strategy ◽  
Control Strategies ◽  
Effective Control ◽  
Control Methods ◽  
Paper Briefly ◽  
Garbage Disposal

The garbage disposal system is not a very large system,but it is a complex system..You need to take different control strategies according to different control objects, belonging to the control problem of the complexity of the uncertainty of the object (or process). Conventional control methods (such as PID, etc.) is difficult to implement effective control of such object.It is necessary to explore more effective control strategy. The paper briefly discusses the problem of intelligent control of the garbage disposal systems based on DCS.

Ultrasonic sensor system for the uses in intelligent motion control system of a mobile robots group

2010 ◽  
Vol 7 ◽  
pp. 109-117
Author(s):  
O.V. Darintsev ◽  
A.B. Migranov ◽  
B.S. Yudintsev
Keyword(s):  
Control System ◽  
Mobile Robot ◽  
Mobile Robots ◽  
Motion Control ◽  
High Speed ◽  
Ultrasonic Sensor ◽  
Sensor System ◽  
Motion Control System ◽  
Speed Sensor ◽  
Working Space

The article deals with the development of a high-speed sensor system for a mobile robot, used in conjunction with an intelligent method of planning trajectories in conditions of high dynamism of the working space.

A Review of Classical and Modern Control Techniques Utilized in Modern Microgrids

2021 ◽  
Vol 14 ◽  
Author(s):  
Muhammad Hamza Shahbaz ◽  
Arslan Ahmed Amin
Keyword(s):  
Control Strategies ◽  
Optimal Solution ◽  
Energy Resources ◽  
Control Methods ◽  
Research Gaps ◽  
Control Techniques ◽  
Micro Grid ◽  
Exciting Development ◽  
Micro Grids ◽  
Modern Control

: Because of the consistently expanding energy request, the introduction of a decentralized micro-grid based on energy resources will soon be the most exciting development in the power system. Micro-grids, which are mainly based on inverters, are becoming more popular as they can handle different forms of renewable energy effectively. However, one of the most challenging areas of research is their control. In the last few years, many control strategies have been developed. In this review, different control methods have been discussed that apply to the micro-grid system. Furthermore, the comparative analysis of classical and modern control strategies is also considered. This survey guides the new researchers about all available control strategies and room for improvement towards the optimal solution of the micro-grid control techniques. It also identifies several research gaps and future trends therein as well as provides a solution to manage problems in MGs. The strategies are then compared based on their applicability to different control requirements.

scholarly journals Robust Position Control of an Over-actuated Underwater Vehicle under Model Uncertainties and Ocean Current Effects Using Dynamic Sliding Mode Surface and Optimal Allocation Control

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 747
Author(s):  
Mai The Vu ◽  
Tat-Hien Le ◽  
Ha Le Nhu Ngoc Thanh ◽  
Tuan-Tu Huynh ◽  
Mien Van ◽  
...  
Keyword(s):  
Control System ◽  
Motion Control ◽  
Optimal Allocation ◽  
Position Control ◽  
Sliding Mode ◽  
Underwater Vehicle ◽  
Ocean Current ◽  
Model Uncertainties ◽  
Control Module ◽  
Dynamic Sliding Mode

Underwater vehicles (UVs) are subjected to various environmental disturbances due to ocean currents, propulsion systems, and un-modeled disturbances. In practice, it is very challenging to design a control system to maintain UVs stayed at the desired static position permanently under these conditions. Therefore, in this study, a nonlinear dynamics and robust positioning control of the over-actuated autonomous underwater vehicle (AUV) under the effects of ocean current and model uncertainties are presented. First, a motion equation of the over-actuated AUV under the effects of ocean current disturbances is established, and a trajectory generation of the over-actuated AUV heading angle is constructed based on the line of sight (LOS) algorithm. Second, a dynamic positioning (DP) control system based on motion control and an allocation control is proposed. For this, motion control of the over-actuated AUV based on the dynamic sliding mode control (DSMC) theory is adopted to improve the system robustness under the effects of the ocean current and model uncertainties. In addition, the stability of the system is proved based on Lyapunov criteria. Then, using the generalized forces generated from the motion control module, two different methods for optimal allocation control module: the least square (LS) method and quadratic programming (QP) method are developed to distribute a proper thrust to each thruster of the over-actuated AUV. Simulation studies are conducted to examine the effectiveness and robustness of the proposed DP controller. The results show that the proposed DP controller using the QP algorithm provides higher stability with smaller steady-state error and stronger robustness.

Sign in / Sign up

Export Citation Format

Share Document