Thermomechanical Characterization of Blended Biomass-Coal Ash Waste Materials

2016 ◽  
Vol 709 ◽  
pp. 38-41 ◽  
Author(s):  
Tjokorde Walmiki Samadhi ◽  
Winny Wulandari ◽  
Firra Ghassani Gumilar ◽  
Kenita Firsa Ramadani
Keyword(s):  
Coal Ash ◽  
Thermomechanical Behavior ◽  
Waste Materials ◽  
Biomass Combustion ◽  
Calculation Software ◽  
Biomass For Energy ◽  
Liquidus Temperatures ◽  
Biomass Ashes

The combustion of biomass for energy generation is practiced in an increasing scale in Indonesia as the country heads towards the long-term national energy mix targeted by 2025. However, biomass combustion is prone to operational problems caused by the generally low-melting nature of biomass ashes. This work discusses the effects of co-combusting coal with POEFB (palm oil empty fruit bunch) and bamboo with respect to the thermomechanical behavior of the produced ashes. Coal is observed to increase the ash fusion temperatures (AFT) of neat and combined POEFB and bamboo ashes by as much as 300 °C. Aluminosilicate minerals in the coal combine with potassium in the biomass during co-combustion, producing high-melting K-aluminosilicates. A linear correlation is identified between measured AFT and ash liquidus temperatures estimated by FactSage thermochemistry calculation software, enabling the prediction of AFT of coal-biomass co-combustion systems.

Use of Ashes from Biomass Combustion as an Aggregate for Concrete

2019 ◽  
Vol 958 ◽  
pp. 111-115
Author(s):  
V.A.S. Schein ◽  
G. Conte ◽  
Marilena Valadares Folgueras ◽  
L.V.O. Dalla Valentina ◽  
M.R. Medeiros
Keyword(s):  
Compressive Strength ◽  
Power Plant ◽  
Environmentally Friendly ◽  
Biomass Combustion ◽  
Chemical Analyses ◽  
Structural Concrete ◽  
Mixing Ratios ◽  
Physical And Chemical ◽  
Biomass Ashes

This paper discusses an environmentally-friendly destination for the residual ashes resulting from the firing of biomass (wood wastes) at the Engie Brasil Cogeneration Power Plant located in Lages, Santa Catarina, Brazil. The study proposes reusing the residue as a substitution for crushed stones in the production of concrete. Environmental, physical, and chemical analyses were performed for characterization of the ashes. Specimens prepared with ash and subjected to testing presented a compressive strength of around 18.63 Mpa (2700 psi), which is in compliance with the ACI-213R and ASTM C330-5 specifications. With pretreatment and proper mixing ratios, biomass ashes may be employed as an aggregate in the manufacture of lightweight structural concrete.

scholarly journals Characterization of Highly Irradiated ALPIDE Silicon Sensors

Universe ◽  
2019 ◽  
Vol 5 (4) ◽  
pp. 91
Author(s):  
Valentina Raskina ◽  
Filip Křížek
Keyword(s):  
Nuclear Physics ◽  
Detection Efficiency ◽  
Tracking System ◽  
Physics Institute ◽  
Total Ionization ◽  
Silicon Sensors ◽  
Active Pixel ◽  
Academy Of Sciences

The ALICE (A Large Ion Collider Experiment) experiment at CERN will upgrade its Inner Tracking System (ITS) detector. The new ITS will consist of seven coaxial cylindrical layers of ALPIDE silicon sensors which are based on Monolithic Active Pixel Sensor (MAPS) technology. We have studied the radiation hardness of ALPIDE sensors using a 30 MeV proton beam provided by the cyclotron U-120M of the Nuclear Physics Institute of the Czech Academy of Sciences in Řež. In this paper, these long-term measurements will be described. After being irradiated up to the total ionization dose 2.7 Mrad and non-ionizing energy loss 2.7 × 10 13 1 MeV n eq · cm - 2 , ALPIDE sensors fulfill ITS upgrade project technical design requirements in terms of detection efficiency and fake-hit rate.

Post-Operative Dysphagia in Anterior Cervical Discectomy and Fusion

2021 ◽  
pp. 000348942110155
Author(s):  
Leonard Haller ◽  
Khush Mehul Kharidia ◽  
Caitlin Bertelsen ◽  
Jeffrey Wang ◽  
Karla O’Dell
Keyword(s):  
Risk Factors ◽  
Medical Records ◽  
Assessment Tool ◽  
Demographic Data ◽  
Anterior Cervical Discectomy ◽  
Cervical Discectomy ◽  
Long Term Follow Up

Objective: We sought to identify risk factors associated with long-term dysphagia, characterize changes in dysphagia over time, and evaluate the incidence of otolaryngology referrals for patients with long-term dysphagia following anterior cervical discectomy with fusion (ACDF). Methods: About 56 patients who underwent ACDF between May 2017 to February 2019 were included in the study. All patients were assessed for dysphagia using the Eating Assessment Tool (EAT-10) survey preoperatively and late postoperatively (≥1 year). Additionally, 28 patients were assessed for dysphagia early postoperatively (2 weeks—3 months). Demographic data, medical comorbidities, intraoperative details, and post-operative otolaryngology referral rates were collected from electronic medical records. Results: Of the 56 patients enrolled, 21 patients (38%) had EAT-10 scores of 3 or more at long-term follow-up. None of the demographics, comorbidities, or surgical factors assessed were associated with long-term dysphagia. Patients who reported no long-term dysphagia had a mean EAT-10 score of 6.9 early postoperatively, while patients with long-term symptoms had a mean score of 18.1 ( P = .006). Of the 21 patients who reported persistent dysphagia symptoms, 3 (14%) received dysphagia testing or otolaryngology referrals post-operatively. Conclusion: Dysphagia is a notable side effect of ACDF surgery, but there are no significant demographics, comorbidities, or surgical risk factors that predict long-term dysphagia. Early postoperative characterization of dysphagia using the EAT-10 questionnaire can help predict long-term symptoms. There is inadequate screening and otolaryngology follow-up for patients with post-ACDF dysphagia.

scholarly journals Clinical characterization of 266 patients and family members with cleft lip and/or palate with associated malformations and syndromes

2021 ◽  
Author(s):  
Theodosia Bartzela ◽  
Björn Theuerkauf ◽  
Elisabeth Reichardt ◽  
Malte Spielmann ◽  
Charlotte Opitz
Keyword(s):  
Early Identification ◽  
Congenital Malformations ◽  
Cleft Lip ◽  
Phenotypic Variability ◽  
Family Members ◽  
Pierre Robin Sequence ◽  
Associated Malformations ◽  
Pierre Robin

Abstract Objectives To clinically characterize patients and family members with cleft lip and/or palate (CL/P) and associated congenital malformations or syndromes and propose possible inheritance patterns. Materials and methods An observational study of patients with CL/P, including medical and family history and intra- and extra-oral examination of their family members, was performed. Results Two hundred sixty-six patients, 1257 family members, and 42 pedigrees were included in the study. The distribution of patients according to the cleft type was 57.9% with CLP, 25.2% with cleft palate (CPO), and 12.8% with cleft lip with/without alveolus (CL/A). Seventy-four (27.8%) patients had associated malformations, and 24 (9.2%) a syndrome. The skeletal (27.7%), cardiovascular (19.3%) systems, and eyes (22.9%) were most commonly affected. Pierre Robin Sequence (7 patients) and van der Woude (4) were the most common syndromes. The majority of patients with CPO (19/24) had an associate syndrome. The families had an average of 2.45 affected members. Conclusion Individual and interfamilial phenotypic variability in patients with CL/P makes the understanding of etiopathogenesis challenging. Clinical relevance The overall prevalence of individuals with CL/P and their pedigrees with associated malformations and syndromes emphasize the need for early identification, interdisciplinary, and long-term planning.

scholarly journals The Influence of Cement Substitution by Biomass Fly Ash on the Polymer–Cement Composites Properties

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3079
Author(s):  
Beata Jaworska ◽  
Dominika Stańczak ◽  
Joanna Tarańska ◽  
Jerzy Jaworski
Keyword(s):  
Fly Ash ◽  
Building Materials ◽  
Raw Materials ◽  
Combustion Process ◽  
Biomass Combustion ◽  
Cement Composites ◽  
Cement Mortars ◽  
Mineral Additive ◽  
Biomass Fly Ash

The generation of energy for the needs of the population is currently a problem. In consideration of that, the biomass combustion process has started to be implemented as a new source of energy. The dynamic increase in the use of biomass for energy generation also resulted in the formation of waste in the form of fly ash. This paper presents an efficient way to manage this troublesome material in the polymer–cement composites (PCC), which have investigated to a lesser extent. The research outlined in this article consists of the characterization of biomass fly ash (BFA) as well as PCC containing this waste. The characteristics of PCC with BFA after 3, 7, 14, and 28 days of curing were analyzed. Our main findings are that biomass fly ash is suitable as a mineral additive in polymer–cement composites. The most interesting result is that the addition of biomass fly ash did not affect the rheological properties of the polymer–cement mortars, but it especially influenced its compressive strength. Most importantly, our findings can help prevent this byproduct from being placed in landfills, prevent the mining of new raw materials, and promote the manufacture of durable building materials.

Sign in / Sign up

Export Citation Format

Share Document