Seismic Performance of a Historical Apartment Building Using a Barcelona Model (BM) Adapted for Masonry Walls

2017 ◽  
Vol 747 ◽  
pp. 646-652 ◽  
Author(s):  
Izabela J. Drygala ◽  
Joanna M. Dulinska ◽  
Łukasz Bednarz ◽  
Jerzy Jasienko
Keyword(s):  
Seismic Event ◽  
Three Dimensional ◽  
Nonlinear Behavior ◽  
Fe Model ◽  
Inelastic Behavior ◽  
Apartment Building ◽  
Strongly Nonlinear ◽  
Seismic Shock ◽  
Historical Masonry ◽  
Standard Software

The main objective of this study was to examine the dynamic response of a masonry monumental apartment building subjected to a strong seismic event. A three-dimensional FE model of the building was prepared with the ABAQUS Standard software program. Three components of the registered seismic event were applied as seismic excitation acting in three directions. To represent the inelastic behavior of the masonry elements of the structure under the earthquake, a Barcelona Model (BM) was assumed as a constitutive model for the masonry elements. The analysis proved that strongly nonlinear behavior of the masonry monumental apartment building was observed under the strong seismic shock. The plastic strains as well as the tensile damage (cracking) were obtained in some zones of the walls of the structure after seismic shock. In the paper authors also discussed the methodology for strengthening and structural health monitoring dedicated for historical masonry structures.

scholarly journals Modeling Laterally Loaded Single Piles Accounting for Nonlinear Soil-Pile Interactions

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Maryam Mardfekri ◽  
Paolo Gardoni ◽  
Jose M. Roesset
Keyword(s):  
Finite Element ◽  
Lateral Displacement ◽  
Three Dimensional ◽  
Nonlinear Behavior ◽  
Soil Mass ◽  
Fe Model ◽  
The Finite Element Method ◽  
Pile Diameter ◽  
Single Piles ◽  
Laterally Loaded

The nonlinear behavior of a laterally loaded monopile foundation is studied using the finite element method (FEM) to account for soil-pile interactions. Three-dimensional (3D) finite element modeling is a convenient and reliable approach to account for the continuity of the soil mass and the nonlinearity of the soil-pile interactions. Existing simple methods for predicting the deflection of laterally loaded single piles in sand and clay (e.g., beam on elastic foundation,p-ymethod, and SALLOP) are assessed using linear and nonlinear finite element analyses. The results indicate that for the specific case considered here thep-ymethod provides a reasonable accuracy, in spite of its simplicity, in predicting the lateral deflection of single piles. A simplified linear finite element (FE) analysis of piles, often used in the literature, is also investigated and the influence of accounting for the pile diameter in the simplified linear FE model is evaluated. It is shown that modeling the pile as a line with beam-column elements results in a reduced contribution of the surrounding soil to the lateral stiffness of the pile and an increase of up to 200% in the predicted maximum lateral displacement of the pile head.

scholarly journals Numerical Analysis of the Perforated Steel Sheets Under Uni-Axial Tensile Force

Metals ◽  
2019 ◽  
Vol 9 (6) ◽  
pp. 632 ◽  
Author(s):  
Ahmed M. Sayed
Keyword(s):  
Load Capacity ◽  
Tensile Force ◽  
Three Dimensional ◽  
Tensile Load ◽  
Experimental Tests ◽  
Strain Engineering ◽  
Uniaxial Tensile ◽  
Fe Model ◽  
Stress Strain ◽  
Steel Sheets

The perforated steel sheets have many uses, so they should be studied under the influence of the uniaxial tensile load. The presence of these holes in the steel sheets certainly affects the mechanical properties. This paper aims at studying the behavior of the stress-strain engineering relationships of the perforated steel sheets. To achieve this, the three-dimensional finite element (FE) model is mainly designed to investigate the effect of this condition. Experimental tests were carried out on solid specimens to be used in the test of model accuracy of the FE simulation. Simulation testing shows that the FE modeling revealed the ability to calculate the stress-strain engineering relationships of perforated steel sheets. It can be concluded that the effect of a perforated rhombus shape is greater than the others, and perforated square shape has no effect on the stress-strain engineering relationships. The efficiency of the perforated staggered or linearly distribution shapes with the actual net area on the applied loads has the opposite effect, as it reduces the load capacity for all types of perforated shapes. Despite the decrease in load capacity, it improves the properties of the steel sheets.

Finite Element Study of the Cutting Mechanics of the Three Dimensional Rock Turning Process

2015 ◽  
Author(s):  
Demeng Che ◽  
Jacob Smith ◽  
Kornel F. Ehmann
Keyword(s):  
Finite Element ◽  
Oil And Gas ◽  
Three Dimensional ◽  
Polycrystalline Diamond ◽  
Close Correlation ◽  
Experimental Results ◽  
Failure Behavior ◽  
Fe Model ◽  
Gas Drilling ◽  
Cutting Mechanics

The unceasing improvements of polycrystalline diamond compact (PDC) cutters have pushed the limits of tool life and cutting efficiency in the oil and gas drilling industry. However, the still limited understanding of the cutting mechanics involved in rock cutting/drilling processes leads to unsatisfactory performance in the drilling of hard/abrasive rock formations. The Finite Element Method (FEM) holds the promise to advance the in-depth understanding of the interactions between rock and cutters. This paper presents a finite element (FE) model of three-dimensional face turning of rock representing one of the most frequent testing methods in the PDC cutter industry. The pressure-dependent Drucker-Prager plastic model with a plastic damage law was utilized to describe the elastic-plastic failure behavior of rock. A newly developed face turning testbed was introduced and utilized to provide experimental results for the calibration and validation of the formulated FE model. Force responses were compared between simulations and experiments. The relationship between process parameters and force responses and the mechanics of the process were discussed and a close correlation between numerical and experimental results was shown.

scholarly journals Modelling human skull growth: a validated computational model

2017 ◽  
Vol 14 (130) ◽  
pp. 20170202 ◽  
Author(s):  
Joseph Libby ◽  
Arsalan Marghoub ◽  
David Johnson ◽  
Roman H. Khonsari ◽  
Michael J. Fagan ◽  
...  
Keyword(s):  
Computational Model ◽  
Three Dimensional ◽  
Basic Knowledge ◽  
Fe Model ◽  
Adult Size ◽  
Fe Method ◽  
Percentage Difference ◽  
Skull Growth

During the first year of life, the brain grows rapidly and the neurocranium increases to about 65% of its adult size. Our understanding of the relationship between the biomechanical forces, especially from the growing brain, the craniofacial soft tissue structures and the individual bone plates of the skull vault is still limited. This basic knowledge could help in the future planning of craniofacial surgical operations. The aim of this study was to develop a validated computational model of skull growth, based on the finite-element (FE) method, to help understand the biomechanics of skull growth. To do this, a two-step validation study was carried out. First, an in vitro physical three-dimensional printed model and an in silico FE model were created from the same micro-CT scan of an infant skull and loaded with forces from the growing brain from zero to two months of age. The results from the in vitro model validated the FE model before it was further developed to expand from 0 to 12 months of age. This second FE model was compared directly with in vivo clinical CT scans of infants without craniofacial conditions ( n = 56). The various models were compared in terms of predicted skull width, length and circumference, while the overall shape was quantified using three-dimensional distance plots. Statistical analysis yielded no significant differences between the male skull models. All size measurements from the FE model versus the in vitro physical model were within 5%, with one exception showing a 7.6% difference. The FE model and in vivo data also correlated well, with the largest percentage difference in size being 8.3%. Overall, the FE model results matched well with both the in vitro and in vivo data. With further development and model refinement, this modelling method could be used to assist in preoperative planning of craniofacial surgery procedures and could help to reduce reoperation rates.

Three-Dimensional Computations of Transport and Growth for Crystal Growth Systems

2000 ◽  
Author(s):  
Jeffrey J. Derby ◽  
Andrew Yeckel
Keyword(s):  
Finite Element ◽  
Crystal Growth ◽  
Finite Element Methods ◽  
Three Dimensional ◽  
Bulk Crystal ◽  
Time Dependent ◽  
Engineering Systems ◽  
Bulk Crystal Growth ◽  
Strongly Nonlinear ◽  
Parallel Supercomputers

Abstract Modern finite element methods implemented on parallel supercomputers promise to allow the study of three-dimensional, time-dependent continuum phenomena in many engineering systems. This paper shows several examples of the fruitful application of these approaches to bulk crystal growth systems, where strongly nonlinear coupled phenomena are important.

Management of Complex Loading Histories for Use in Probabilistic Creep-Fatigue Damage Assessments

2018 ◽  
Author(s):  
N. A. Zentuti ◽  
J. D. Booker ◽  
R. A. W. Bradford ◽  
C. E. Truman
Keyword(s):  
Fatigue Damage ◽  
Input Parameter ◽  
Three Dimensional ◽  
Complex Loading ◽  
Fe Model ◽  
Plant Component ◽  
Fatigue Lifetime ◽  
Wide Range ◽  
Stress Components ◽  
Creep Fatigue

An approach is outlined for the treatment of stresses in complex three-dimensional components for the purpose of conducting probabilistic creep-fatigue lifetime assessments. For conventional deterministic assessments, the stress state in a plant component is found using thermal and mechanical (elastic) finite element (FE) models. Key inputs are typically steam temperatures and pressures, with the three principal stress components (PSCs) at the assessment location(s) being the outputs. This paper presents an approach which was developed based on application experience with a tube-plate ligament (TPL) component, for which historical data was available. Though both transient as well as steady-state conditions can have large contributions towards the creep-fatigue damage, this work is mainly concerned with the latter. In a probabilistic assessment, the aim of this approach is to replace time intensive FE runs with a predictive model to approximate stresses at various assessment locations. This is achieved by firstly modelling a wide range of typical loading conditions using FE models to obtain the desire stresses. Based on the results from these FE runs, a probability map is produced and input(s)-output(s) functions are fitted (either using a Response Surface Method or Linear Regression). These models are thereafter used to predict stresses as functions of the input parameter(s) directly. This mitigates running an FE model for every probabilistic trial (of which there typically may be more than 104), an approach which would be computationally prohibitive.

scholarly journals Established Numerical Techniques for the Structural Analysis of a Regional Aircraft Landing Gear

2018 ◽  
Vol 2018 ◽  
pp. 1-21 ◽  
Author(s):  
F. Caputo ◽  
A. De Luca ◽  
A. Greco ◽  
A. Marro ◽  
A. Apicella ◽  
...  
Keyword(s):  
Finite Elements ◽  
Numerical Models ◽  
Three Dimensional ◽  
Landing Gear ◽  
Point Of View ◽  
Fe Model ◽  
One Dimensional ◽  
Reaction Forces ◽  
Local Technique ◽  
Stick Model

Usually during the design of landing gear, simplified Finite Element (FE) models, based on one-dimensional finite elements (stick model), are used to investigate the in-service reaction forces involving each subcomponent. After that, the design of such subcomponent is carried out through detailed Global/Local FE analyses where, once at time, each component, modelled with three-dimensional finite elements, is assembled into a one-dimensional finite elements based FE model, representing the whole landing gear under the investigated loading conditions. Moreover, the landing gears are usually investigated also under a kinematic point of view, through the multibody (MB) methods, which allow achieving the reaction forces involving each subcomponent in a very short time. However, simplified stick (FE) and MB models introduce several approximations, providing results far from the real behaviour of the landing gear. Therefore, the first goal of this paper consists of assessing the effectiveness of such approaches against a 3D full-FE model. Three numerical models of the main landing gear of a regional airliner have been developed, according to MB, “stick,” and 3D full-FE methods, respectively. The former has been developed by means of ADAMS® software, the other two by means of NASTRAN® software. Once this assessment phase has been carried out, also the Global/Local technique has verified with regard to the results achieved by the 3D full-FE model. Finally, the dynamic behaviour of the landing gear has been investigated both numerically and experimentally. In particular, Magnaghi Aeronautica S.p.A. Company performed the experimental test, consisting of a drop test according to EASA CS 25 regulations. Concerning the 3D full-FE investigation, the analysis has been simulated by means of Ls-Dyna® software. A good level of accuracy has been achieved by all the developed numerical methods.

The Effect of Trabecular Bone on the Mechanical Response of Human Mandible with Implant

2014 ◽  
Vol 695 ◽  
pp. 588-591
Author(s):  
Khairul Salleh Basaruddin ◽  
Ruslizam Daud
Keyword(s):  
Computed Tomography ◽  
Finite Element ◽  
Trabecular Bone ◽  
Static Analysis ◽  
Load Distribution ◽  
Mechanical Response ◽  
Three Dimensional ◽  
Fe Model ◽  
Micro Computed Tomography ◽  
Bone Specimen

This study aims to investigate the influence of trabecular bone in human mandible bone on the mechanical response under implant load. Three dimensional voxel finite element (FE) model of mandible bone was reconstructed from micro-computed tomography (CT) images that were captured from bone specimen. Two FE models were developed where the first consists of cortical bone, trabecular bone and implants, and trabecular bone part was excluded in the second model. A static analysis was conducted on both models using commercial software Voxelcon. The results suggest that trabecular bone contributed to the strength of human mandible bone and to the effectiveness of load distribution under implant load.

Sign in / Sign up

Export Citation Format

Share Document