Soundness in Mortars of Portland Cement with Substitutions Using Cactus (Opuntia ficus-indica) and Corn Starch

2018 ◽  
Vol 789 ◽  
pp. 150-154
Author(s):  
Victor Hugo Blancas-Herrera ◽  
Jorge Alberto Pacheco-Segovia ◽  
Wilfrido Martínez-Molina ◽  
Hugo Luis Chávez García ◽  
Mauricio Arreola-Sanchez ◽  
...  
Keyword(s):  
Portland Cement ◽  
Corn Starch ◽  
Weight Ratio ◽  
Physical And Mechanical Properties ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Electric Resistivity ◽  
Cement Matrix ◽  
Opuntia Ficus Indica

The use of dehydrated fibres of cactus, Opuntia ficus-indica (FN), and starch (corn starch,Zea Mays (MZ)) as partial substitutes for the total mass of Portland Cement (CP) in the making ofmortar, aims at modifying its physical and mechanical properties, reducing the amount of cementand the CO2 emission. Four mixtures of CP mortar were designed incorporating a superplasticizeradditive with a water/cement weight ratio of 0.68. To compare the results, there was a controlmortar; two mixtures with partial substitutions using fibres of FN, 0.5 and 1.5% (in weight of CP)respectively; and a substituted mixture with 2% of corn starch plus 0.5% of cactus fibre (MZ - FN).The test age was 180 days. The specimens were subjected to an accelerated attack of sodiumsulphate, quantifying the electric resistivity (ER) and the ultrasonic pulse velocity (UPV). Theresults indicate that the substitution of the materials, remarkably densify the cement matrix, whichresults in the improvement of the physical properties and the durability.

scholarly journals Modification of the Structure and Properties of Lightweight Cement Composite with PVA Fibers

Materials ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 5983
Author(s):  
Donatas Sikarskas ◽  
Valentin Antonovič ◽  
Jurgita Malaiškienė ◽  
Renata Boris ◽  
Rimvydas Stonys ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Blended Cement ◽  
Physical And Mechanical Properties ◽  
Type A ◽  
Cement Composite ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Cement Matrix ◽  
Pva Fiber

This study addresses the application of polyvinyl alcohol (PVA) fibers to improve the performance of lightweight cement composites with pozzolans. Blended cement mixes based on expanded glass granules were modified with PVA fibers (Type A: Ø40 µm, L = 8 mm and Type B: Ø200 µm, L = 12 mm). The following research methods were used to analyse the effect of the fibers on the structure of cement matrix and physical-mechanical properties of lightweight composite: SEM, XRD, DTG, calorimetry tests, and standard test methods of physical and mechanical properties. Results from the tests showed that a denser layer of hydrates was formed around the PVA fiber and the amounts of portlandite, CSH, and CASH formed in the specimens with PVA were found to be higher. PVA fibers of Type A accelerated hydration of the cement paste, slightly increased the compressive strength of the lightweight composite, but had no significant effect on the values of density, ultrasonic pulse velocity and flexural strength. The shrinkage of cement composite was significantly reduced using both types of PVA fiber and both types of PVA fibers increased the fracture energy of lightweight cement composite with expanded granules.

Mechanical properties and freeze-thaw resistances of bronze-concrete composites

2021 ◽  
Vol 12 (2) ◽  
pp. 39
Author(s):  
Tuba Bahtli ◽  
Nesibe Sevde Ozbay
Keyword(s):  
Mechanical Properties ◽  
Bending Strength ◽  
Physical And Mechanical Properties ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Test Methods ◽  
Pulse Velocity ◽  
Plastic Energy ◽  
Freeze Thaw ◽  
Schmidt Rebound Hammer

Studies in the literature show that the physical and mechanical properties of concrete could be improved by the incorporation of different kinds of industrial waste, including waste tire rubber and tire steel. Recycling of waste is important for economic gain and to curb environmental problems. In this study, finely ground CuAl10Ni bronze is used to improve the physical and mechanical properties, and freeze-thaw resistances of C30 concrete. The density, cold crushing strength, 3-point bending strength, elastic modulus, toughness, and freeze-thaw resistances of concrete are determined. In addition, the Schmidt Rebound Hammer (SRH) and the ultrasonic pulse velocity (UPV) tests, which are non-destructive test methods, are applied. SEM/EDX analyses are also carried out. It is noted that a more compacted structure of concrete is achieved with the addition of bronze sawdust. Then higher density and strength values are obtained for concretes that are produced by bronze addition. In addition, concretes including bronze sawdust generally show higher toughness due to high plastic energy capacities than pure concrete.

scholarly journals Ultrasonic Pulse Velocity—Compressive Strength Relationship for Portland Cement Mortars Cured at Different Conditions

Crystals ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 133 ◽  
Author(s):  
Esteban Estévez ◽  
Domingo Alfonso Martín ◽  
Cristina Argiz ◽  
Miguel Ángel Sanjuán
Keyword(s):  
Compressive Strength ◽  
Portland Cement ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Internal Quality ◽  
Curing Conditions ◽  
Linear Relationships ◽  
Cement Mortars ◽  
Strength Relationship

The purpose of this paper is to establish some correlations between the main technical parameter with regard to the cement-based materials technology, the 28-day compressive strength, and ultrasonic pulse velocity of standard mortar samples cured at three different conditions—(i) under water at 22 °C; (ii) climatic chamber at 95% RH and 22 °C; (iii) lab ambient, 50% RH, and 22 °C—and after five curing periods of 1, 2, 7, 14, and 28 days. Good correlations for each curing conditions were obtained. All the positive linear relationships showed better R2 than exponential ones. These findings may promote the use of ultrasonic pulse velocity for the estimation of the 28-day compressive strength of standard Portland cement samples within the factory internal quality control.

Ultrasonic pulse velocity for the evaluation of physical and mechanical properties of a highly porous building limestone

Ultrasonics ◽  
2015 ◽  
Vol 60 ◽  
pp. 33-40 ◽  
Author(s):  
Emilia Vasanelli ◽  
Donato Colangiuli ◽  
Angela Calia ◽  
Maria Sileo ◽  
Maria Antonietta Aiello
Keyword(s):  
Mechanical Properties ◽  
Physical And Mechanical Properties ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Highly Porous

scholarly journals Factors influencing ultrasonic pulse velocity in concrete

2020 ◽  
Vol 13 (2) ◽  
pp. 222-247 ◽  
Author(s):  
J. P. GODINHO ◽  
T. F. DE SOUZA JÚNIOR ◽  
M. H. F. MEDEIROS ◽  
M. S. A SILVA
Keyword(s):  
Portland Cement ◽  
Concrete Strength ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Hydrated Calcium Silicate ◽  
Degree Of Hydration ◽  
Mix Proportion ◽  
Non Destructive ◽  
Cylindrical Test

Abstract The hydration process of Portland cement triggers reactions of stabilization of minerals from the contact of the clinker with water, which is the Hydrated Calcium Silicate (C-S-H), the Etringite (3CaO.Al2O3.3CaSO4.32H2O) and the Portlandite (Ca(OH)2). In order to understand the effects of the evolution of hydration in cement, it is possible to apply non-destructive tests. In this context, the objective of this work is to evaluate the influence of the type of cement, the curing age, of the format and humidity of the test specimens of concrete in the ultrasonic pulse velocity (UPV). In order to do that, 36 cylindrical test specimens (10 x 20 cm) and 9 cubic ones with 25 cm of edges, with mix proportion of 1:2,7:3,2 (cement/sand/gravel), water/cement ratio of 0.58 and three types of Portland cement (CP II-Z-32, CP IV-32 RS and CP V-ARI) were molded. With data obtained it was possible to correlate the increase of concrete strength along time (at ages of 7, 14, 28, 70 and 91 days) with the increase of the ultrasonic pulse velocity. Besides, it was possible to prove the direct influence of the concrete moisture and of the degree of hydration in the UPV. The shape of the test specimen generally had no influence on the results, except in the case of cement CP V ARI.

Natural Additive to Retard the Setting of a Mortar and Increase its Resistance

2020 ◽  
Vol 841 ◽  
pp. 119-123
Author(s):  
Noel Díaz González ◽  
Luis Alberto González Luna ◽  
Elia Mercedes Alonso Guzmán ◽  
Wilfrido Martínez Molina ◽  
Hugo Luis Chávez García ◽  
...  
Keyword(s):  
Electrical Resistivity ◽  
Setting Time ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Cement Matrix ◽  
Simple Compression ◽  
Non Destructive ◽  
Natural Additive ◽  
Density Results

The use of better materials is essential for the development of a country, that is why in this work we analyze a mixture of cement-based mortar with an addition of mucilage from a plant called Maralfalfa, said plant is used as feed for cattle and it is thought that its hydrate content can improve the water-cement reaction. Two mixtures were made, one control and another with the addition. The material used was: volcanic sand from Michoacán, cement CPC 30R RS, drinking water and the addition of mucilage. Cubic specimens (5x5x5 cm), prismatic specimens (4x4x16 cm) and briquettes were made, which were tested at 7, 14, 21, 28, 45 and 70 days of age. The tests performed were non-destructive (density, ultrasonic pulse rate and electrical resistivity) and destructive (simple compression, flexion and tension). The density results indicate that the mixture with addition densifies the cement matrix, the ultrasonic pulse velocity results are very similar between the mixtures, the results of electrical resistivity indicate that the control mixture is slightly higher. In terms of simple compression and flexion, it is indicated that the mixture with the addition was higher than the control, whereas the voltage results indicate the opposite. In addition, it was found that the addition retards the setting time of the mixture.

scholarly journals Comparative study on physical and mechanical properties of high slump and zero lump high volume fly ash concrete (HVFAC)

2013 ◽  
Vol 15 (4) ◽  
pp. 578-584 ◽  
Keyword(s):  
Experimental Investigation ◽  
Fly Ash ◽  
Physical And Mechanical Properties ◽  
High Volume ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Fly Ash Concrete ◽  
High Volume Fly Ash ◽  
Class F Fly Ash

<p>An experimental investigation was carried out to compare the compressive strength of zero slump and high slump concrete with high volume fly ash. 40% to 70% replacements of OPC (by weight) with class F fly ash have been incorporated. Superplasticizer was added at 1% of binder (cement + fly ash) to the zero slump mixture to get a slump in the range of 140 to 180mm and cubes were cast without compaction. The results showed that the apparent porosity and water absorption were higher for zero slump concrete than high slump concrete. Zero slump concrete showed better compressive strengths than superplasticized concrete with 40 to 60% fly ash addition for all curing times tested (3,7 and 28 days). Ultrasonic pulse velocity results categorized all mixes as of &lsquo;EXCELLENT&rsquo; concrete quality. Based on the present experimental investigation, it can be concluded that high volume fly ash concrete is suitable for general construction applications.</p>

scholarly journals PHYSICAL AND MECHANICAL PROPERTIES RESEARCH AND ANALYSIS OF CONCRETE WITH BIOFUEL COMBUSTION FLY ASH SUPPLEMENT

2019 ◽  
Vol 11 (0) ◽  
pp. 1-5
Author(s):  
Deividas Augutis ◽  
Džigita Nagrockienė
Keyword(s):  
Mechanical Properties ◽  
Fly Ash ◽  
Physical And Mechanical Properties ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Ash Content ◽  
Closed Porosity ◽  
Freeze Thaw ◽  
Materials Used

Materials used for the study: Portland cement CEM I 42,5 R, 0/4 fraction sand, 4/16 fraction gravel, biofuel fly ash, superplastizer ViscoCrete D187 (V) and water. Seven compositions of concrete were designed by replacing 0%, 5%, 10%, 15%, 20%, 25% and 30% of cement with biofuel fly ash. The article analyses the effect of biofuel fly ash content on the properties of concrete. Studies have shown that the increase of biofuel fly ash content up to 15% increases concrete density and compressive strengh after 28 days of curing, compressive strength, ultrasonic pulse velocity, closed porosity, concrete forecasted freeze-thaw cycles and decreases water absorbtion, open porosity.

Sign in / Sign up

Export Citation Format

Share Document