Tensile, Flexural and Water Absorption Properties of Bamboo Fiber/Unsaturated Polyester Composites: Effect of Calcium Carbonate Content

2020 ◽  
Vol 867 ◽  
pp. 68-74
Author(s):  
Sugiman Sugiman ◽  
Atin Martino ◽  
Paryanto Dwi Setyawan ◽  
Buan Anshari
Keyword(s):  
Tensile Strength ◽  
Elastic Modulus ◽  
Flexural Strength ◽  
Water Absorption ◽  
Unsaturated Polyester ◽  
Bamboo Fiber ◽  
Flexural Properties ◽  
Carbonate Content ◽  
Absorption Properties ◽  
Polyester Composites

The paper presents the effect of CaCO3 content on the tensile, flexural and water absorption properties of bamboo fiber/polystyrene-modified unsaturated polyester composites. Two volume fractions of bamboo fibers had been used with the CaCO3 content varied from 2.5 to 10 (wt%). The tensile and flexural properties were used to characterize the composites. In addition, the water absorption and its effect of the flexural properties had also been conducted. The results showed that at the bamboo content of 30%, adding CaCO3 up to 10wt% tended to decrease the tensile strength and elastic modulus of bamboo fiber/modified unsaturated polyester composites up to 27% and 4%, respectively; however, at the bamboo content of 20%, its effect was not significant for both the tensile strength and the elastic modulus. Adding CaCO3 seemed not to have a significant effect for both the flexural strength and modulus. Having exposed in distilled water, CaCO3 did not significantly affect the water uptakes and the flexural properties of bamboo fiber/modified unsaturated polyester composites; however, the flexural strength and modulus significantly decreased in the ranges of 24 - 45% and 36 - 43%, respectively, compared to those in dry condition.

Tensile and Flexural Properties of Casuarina equisetifolia Unsaturated Polyester Composites

2013 ◽  
Vol 812 ◽  
pp. 231-235 ◽  
Author(s):  
Borhan Nurulaini ◽  
Ahmad Zafir Romli ◽  
Mohd Hanafiah Abidin
Keyword(s):  
Tensile Strength ◽  
Unsaturated Polyester ◽  
Flexural Modulus ◽  
Tensile Modulus ◽  
Flexural Properties ◽  
Casuarina Equisetifolia ◽  
Flexural Testing ◽  
Polyester Composites ◽  
Composite Samples ◽  
Weight Loading

This study is to determine the effects of tensile and flexural testing on the C.equisetifolia composite at different loading from 10 % to 50 % weight loading (wt%). The results for all composite samples on tensile strength and tensile modulus decreasing as the weight loadings of C.equisetifolia increases. However, the result from tensile modulus was not significant when the C.equisetifolia weight loadings increase in the composite. In addition, the result obtained from flexural modulus and strength at 20 % of C.equisetifolia weight loading, increased to 3.147GPa and 3.25 MPa respectively, while when C.equisetifolia weight loadings increase the results showed a decrease.

scholarly journals Effect of Water Absorption on Flexural Properties of Kenaf/Glass Fibres Reinforced Unsaturated Polyester Hybrid Composites Rod

2022 ◽  
Vol 30 (1) ◽  
pp. 397-412
Author(s):  
Bassam Hamid Alaseel ◽  
Mohamed Ansari Mohamed Nainar ◽  
Noor Afeefah Nordin ◽  
Zainudin Yahya ◽  
Mohd Nazim Abdul Rahim
Keyword(s):  
Flexural Strength ◽  
Water Absorption ◽  
Glass Fibre ◽  
Volume Fraction ◽  
Hybrid Composites ◽  
Unsaturated Polyester ◽  
Flexural Properties ◽  
Effect Of Water ◽  
Kenaf Fibre ◽  
Kenaf Fibres

This study investigates the effect of water absorption on the flexural strength of kenaf/ glass/unsaturated polyester (UPE) hybrid composite solid round rods used for insulating material applications. Three volume fractions of kenaf/glass fibre 20:80 (KGPE20), 30:70 (KGPE30), and 40:60 (KGPE40) with three different fibre arrangement profiles of kenaf fibres were fabricated by using the pultrusion technique and were aimed at studying the effect of kenaf fibres arrangement profile and its content in hybrid composites. The fibre/ resin volume fraction was maintained constant at 60:40. The dispersion morphologies of tested specimens were observed using the scanning electron microscope (SEM). The findings were compared with pure glass fibre-reinforced UPE (control) composite. The water absorption results showed a clear indication of how it influenced the flexural strength of the hybrid and non-hybrid composites. The least affected sample was observed in the 30KGPE composite type, wherein the kenaf fibre was concentrated at the centre of a cross-section of the composite rod. The water absorption reduced the flexural strength by 7%, 40%, 24%, and 38% of glass/UPE (control), 20KGPE, 30KGPE, and 40KGPE composites, respectively. In randomly distributed composite types, the water absorption is directly proportional to the volume fraction of kenaf fibre. At the same time, flexural properties were inversely proportional to the volume fraction of kenaf fibres. Although the influence of water absorption on flexural strength is low, the flexural strength of pultruded hybrid composites was more influenced by the arrangement of kenaf fibre in each composite type than its fibre loading.

Transverse and Longitudinal Flexural Properties of Untreated and Maleic Anhydride Treated Kenaf Bast Fiber Reinforced Unsaturated Polyester Composites

2016 ◽  
Vol 700 ◽  
pp. 93-101
Author(s):  
S.F. Zhafer ◽  
A.R. Rozyanty ◽  
S.B.S. Shahnaz ◽  
Luqman Musa ◽  
A. Zuliahani
Keyword(s):  
Maleic Anhydride ◽  
Flexural Strength ◽  
Unsaturated Polyester ◽  
Flexural Properties ◽  
Bast Fiber ◽  
Bast Fibers ◽  
Polyester Composites ◽  
Kenaf Bast Fibers ◽  
Kenaf Bast ◽  
Kenaf Bast Fiber

Kenaf bast fibers were prepared into two types as untreated and maleic anhydride (MA) treated. Unsaturated polyester (UPE) resin was used as matrix and applied onto the kenaf bast fibers using hand lay-up method. Transverse and longitudinal flexural properties of unidirectional long kenaf bast fiber reinforced unsaturated polyester composites were performed and the effect of fiber modification and loading were studied. It is found that the transverse flexural strength of both types of composites decreases with the increasing of kenaf loading. Contrary, longitudinal flexural strength of both composites increases with the increasing of kenaf loading. Improved transverse and longitudinal flexural properties are shown by MA treatment of kenaf bast fiber. The interactions between fiber and matrix of fractured flexural surface were also observed by scanning electron microscope (SEM).

KENAF/RECYCLED JUTE NATURAL FIBERS UNSATURATED POLYESTER COMPOSITES: WATER ABSORPTION/DIMENSIONAL STABILITY AND MECHANICAL PROPERTIES

2012 ◽  
Vol 01 (01) ◽  
pp. 1250010 ◽  
Author(s):  
EKHLAS A. OSMAN ◽  
ANATOLI VAKHGUELT ◽  
IGOR SBARSKI ◽  
SAAD A. MUTASHER
Keyword(s):  
Water Absorption ◽  
Hybrid Composites ◽  
Unsaturated Polyester ◽  
Natural Fibers ◽  
Fickian Diffusion ◽  
Flexural Properties ◽  
Thickness Swelling ◽  
Kenaf Fiber ◽  
Polyester Composites ◽  
Kenaf Composites

Effects of water absorption on the flexural properties of kenaf-unsaturated polyester composites and kenaf/recycled jute-unsaturated polyester composites were investigated. In the hybrid composites, the total fiber content was fixed to 20 wt%. In this 20 wt%, the addition of jute fiber varied from 0 to 75%, with increment of 25%. The result demonstrates the water absorption and the thickness swelling increased with increase in immersion time. Effects of water absorption on flexural properties of kenaf fiber composites can be reduced significantly with incorporation of recycled jute in composites formulation. The process of absorption of water was found to approach Fickian diffusion behavior for both kenaf composites and hybrid composites.

scholarly journals Mechanical Performance Analysis on Bamboo Fiber Reinforced Polyester Composite

2019 ◽  
Vol 9 (1S4) ◽  
pp. 833-835
Keyword(s):  
Tensile Strength ◽  
Impact Strength ◽  
Flexural Strength ◽  
Mechanical Performance ◽  
Unsaturated Polyester ◽  
Natural Fibers ◽  
Bamboo Fiber ◽  
Weight Percentage ◽  
Polyester Composite ◽  
Composite Production

The present study narrates about the performance of bamboo fiber against polymer matrix. Among different natural fibers bamboo proved to be a potential ones for effective composite production. Based on this aspect this research carried out by using bamboo fiber of length 5mm in chopped form as reinforcement unsaturated polyester used as matrix. The studies were done by varying the bamboo fiber weight percentage as 20, 30 and 40% weight respectively. The prepared specimens are subjected to tensile strength, flexural strength and Impact strength studies. Based on the results obtained this composite suggested for suitable application.

scholarly journals Effect of Graphene Nanoplatelets on Water Absorption Properties of Coconut Shell Reinforced Unsaturated Polyester Composites

2021 ◽  
Vol 2129 (1) ◽  
pp. 012072
Author(s):  
A Abdullah ◽  
M B Abu Bakar ◽  
S H Mohd ◽  
M N Masri
Keyword(s):  
Physical Properties ◽  
Water Absorption ◽  
Unsaturated Polyester ◽  
Compression Molding ◽  
Graphene Nanoplatelets ◽  
Coconut Shell ◽  
Absorption Properties ◽  
Chemical Treatments ◽  
Matrix Adhesion ◽  
Polyester Composites

Abstract Coconut shell (CS) reinforced unsaturated polyester (UPE) composites have been prepared by using hand lay-up and compression molding techniques. To improve fiber-matrix adhesion, the CS was chemically treated by two chemical treatments, which are alkali (NaOH) and alkali-silane with concentration NaOH (6%) and silane (2%). To enhance the performance of CS-UPE composites, graphene nano platelets (GNP) was also added as nanofiller. The water absorption tests were conducted to characterize the physical properties of the composites. The result shows that water absorption increases with the increasing GNP. The more adding of GNP fillers’ weight percentages, the higher the water absorption will be getting.

Sign in / Sign up

Export Citation Format

Share Document