Surface Modification of Commingled Flax/PP and Flax/PLA Fibres by Silane or Atmospheric Argon Plasma Exposure to Improve Fibre–Matrix Adhesion in Composites

Challenges faced by natural fibre-reinforced composites include poor compatibility between hydrophilic fibres such as flax and hydrophobic polymeric matrices such as polypropylene (PP) or poly(lactic acid) (PLA), and their inherent flammability. The former promotes weak interfacial adhesion between fibre and matrix, which may be further compromised by the addition of a flame retardant. This paper investigates the effect that the added flame retardant (FR), guanylurea methylphosphonate (GUP) and selected surface treatments of commingled flax and either PP or PLA fabrics have on the fibre/matrix interfacial cohesive forces in derived composites. Surface treatments included silanisation and atmospheric plasma flame exposure undertaken both individually and in sequence. 1-, 2- and 8-layered composite laminates were examined for their tensile, peeling and flexural properties, respectively, all of which yield measures of fibre-matrix cohesion. For FR-treated Flax/PP composites, maximum improvement was obtained with the combination of silane (using vinyltriethoxysilane) and plasma (150 W) treatments, with the highest peeling strength and flexural properties. However, for FR-treated Flax/PLA composites, maximum improvement in both properties occurred following 150 W plasma exposure only. The improvements in physical properties were matched by increased fibre-matrix adhesion as shown in SEM images of fractured laminates in which fibre-pullout had been eliminated.

The effect of curing schedules on fiber-matrix adhesion in carbon fiber–epoxy resin composites

Fiber-reinforced polymeric composites are used in a large and growing number of applications, all requiring different property sets including the nature of the fiber-matrix adhesion to which the present work is addressed. Specifically, the number of curing cycles, curing temperature and schedule, degree of cure, use of accelerants, annealing, and the use of fiber handling agents are investigated for systems of Hexcel IM7 carbon fibers embedded in Epon862 (resin) and Epikure Curing Agent W (hardener) using the single-fiber fragmentation method. The fractional extent of cure is monitored using differential scanning calorimetry (DSC), so that comparisons are made at the same degree of cure (99%). Single-stage curing at the highest temperature produces the highest apparent adhesion, and the use of accelerants significantly increases the curing rate while maintaining the same level of adhesion. Accelerants in some cases, however, decrease the plastic yield strength of the specimens. Annealing reduces induced residual stress and apparent adhesion, but not below the baseline achieved at lower curing temperatures. Plastic yield strength and apparent adhesion decrease for any degree of cure lower than 95%, while the use of handling agents shows no effect on adhesion.

Effect of Graphene Nanoplatelets on Water Absorption Properties of Coconut Shell Reinforced Unsaturated Polyester Composites

Coconut shell (CS) reinforced unsaturated polyester (UPE) composites have been prepared by using hand lay-up and compression molding techniques. To improve fiber-matrix adhesion, the CS was chemically treated by two chemical treatments, which are alkali (NaOH) and alkali-silane with concentration NaOH (6%) and silane (2%). To enhance the performance of CS-UPE composites, graphene nano platelets (GNP) was also added as nanofiller. The water absorption tests were conducted to characterize the physical properties of the composites. The result shows that water absorption increases with the increasing GNP. The more adding of GNP fillers’ weight percentages, the higher the water absorption will be getting.

Plexin-B2 orchestrates collective stem cell dynamics via actomyosin contractility, cytoskeletal tension and adhesion

During morphogenesis, molecular mechanisms that orchestrate biomechanical dynamics across cells remain unclear. Here, we show a role of guidance receptor Plexin-B2 in organizing actomyosin network and adhesion complexes during multicellular development of human embryonic stem cells and neuroprogenitor cells. Plexin-B2 manipulations affect actomyosin contractility, leading to changes in cell stiffness and cytoskeletal tension, as well as cell-cell and cell-matrix adhesion. We have delineated the functional domains of Plexin-B2, RAP1/2 effectors, and the signaling association with ERK1/2, calcium activation, and YAP mechanosensor, thus providing a mechanistic link between Plexin-B2-mediated cytoskeletal tension and stem cell physiology. Plexin-B2-deficient stem cells exhibit premature lineage commitment, and a balanced level of Plexin-B2 activity is critical for maintaining cytoarchitectural integrity of the developing neuroepithelium, as modeled in cerebral organoids. Our studies thus establish a significant function of Plexin-B2 in orchestrating cytoskeletal tension and cell-cell/cell-matrix adhesion, therefore solidifying the importance of collective cell mechanics in governing stem cell physiology and tissue morphogenesis.

Protein tyrosine phosphatase 1B, PTP1B, targets fak and paxillin in cell-matrix adhesions

Protein tyrosine phosphatase 1B (PTP1B) is an established regulator of cell-matrix adhesion and motility. However, the nature of substrate targets at adhesion sites remains to be validated. Here we used Bimolecular Fluorescence Complementation (BiFC) assays in combination with a substrate trapping mutant of PTP1B to directly examine whether relevant phosphotyrosines on paxillin and FAK are substrates of the phosphatase in the context of cell-matrix adhesion sites. We find that formation of catalytic complexes at cell-matrix adhesions requires intact tyrosine residues Y31 and Y118 on paxillin and the localization of the focal adhesion kinase (FAK) at adhesion sites. In addition, we find that PTP1B specifically targets the Y925 on the focal adhesion target (FAT) domain of FAK at adhesion sites. Electrostatic analysis indicates that dephosphorylation of this residue promotes the closed conformation of the FAT 4-helix bundle, and its interaction with paxillin at adhesion sites.