Real-Time Interpolator and Contour Tracking in Link-Space for a 3 DOF Parallel Mechanism

2008 ◽  
Vol 594 ◽  
pp. 415-436
Author(s):  
Yuan Ming Cheng ◽  
Chien Hsun Kuo ◽  
Jih Hua Chin
Keyword(s):  
Real Time ◽  
Trajectory Tracking ◽  
Inverse Kinematics ◽  
Parallel Mechanism ◽  
Contour Tracking ◽  
Control Points ◽  
Parallel Mechanisms ◽  
Time Efficiency ◽  
Compensation Control ◽  
Space Approach

Parallel mechanisms could be hardly used in contour tracking because of their mechanism features. This study proposed a link-space real time contour tracking for a 3 DOF (Z、α and β) hydraulic parallel mechanism. The essence of this approach is to convert control points of command trajectory to link space by inverse kinematics. A real-time interpolator was created and the multi-axis cross-coupled pre-compensation control (MCCPM) was constructed for link-space contour tracking. It was shown that a contour-accurate trajectory tracking could be performed which was impossible in the original Z-α-β space. Other advantages of this link-space approach were time efficiency and the uniform tracking velocity.

scholarly journals Sensitivity Analysis of Reliability of Low-Mobility Parallel Mechanisms Based on a Response Surface Method

2021 ◽  
Vol 11 (19) ◽  
pp. 9002
Author(s):  
Qiang Yang ◽  
Hongkun Ma ◽  
Jiaocheng Ma ◽  
Zhili Sun ◽  
Cuiling Li
Keyword(s):  
Sensitivity Analysis ◽  
Response Surface ◽  
Response Surface Method ◽  
Inverse Kinematics ◽  
Parallel Mechanism ◽  
Error Component ◽  
Parallel Mechanisms ◽  
Kinematic Accuracy ◽  
Surface Method ◽  
Input Error

Kinematic accuracy is a crucial indicator for evaluating the performance of mechanisms. Low-mobility parallel mechanisms are examples of parallel robots that have been successfully employed in many industrial fields. Previous studies analyzing the kinematic accuracy analysis of parallel mechanisms typically ignore the randomness of each component of input error, leading to imprecise conclusions. In this paper, we use homogeneous transforms to develop the inverse kinematics models of an improved Delta parallel mechanism. Based on the inverse kinematics and the first-order Taylor approximation, a model is presented considering errors from the kinematic parameters describing the mechanism’s geometry, clearance errors associated with revolute joints and driving errors associated with actuators. The response surface method is employed to build an explicit limit state function for describing position errors of the end-effector in the combined direction. As a result, a mathematical model of kinematic reliability of the improved Delta mechanism is derived considering the randomness of every input error component. And then, reliability sensitivity of the improved Delta parallel mechanism is analyzed, and the influences of the randomness of each input error component on the kinematic reliability of the mechanism are quantitatively calculated. The kinematic reliability and proposed sensitivity analysis provide a theoretical reference for the synthesis and optimum design of parallel mechanisms for kinematic accuracy.

scholarly journals Type Synthesis of 1T2R Parallel Mechanisms Using Structure Coupling-Reducing Method

2019 ◽  
Vol 32 (1) ◽  
Author(s):  
Haitao Liu ◽  
Ke Xu ◽  
Huiping Shen ◽  
Xianlei Shan ◽  
Tingli Yang
Keyword(s):  
Explicit Form ◽  
Parallel Mechanism ◽  
Analytic Solutions ◽  
Forward Kinematics ◽  
Parallel Mechanisms ◽  
Type Synthesis ◽  
Real Time Control ◽  
Time Control ◽  
Topological Characteristics ◽  
Zero Coupling

Abstract Direct kinematics with analytic solutions is critical to the real-time control of parallel mechanisms. Therefore, the type synthesis of a mechanism having explicit form of forward kinematics has become a topic of interest. Based on this purpose, this paper deals with the type synthesis of 1T2R parallel mechanisms by investigating the topological structure coupling-reducing of the 3UPS&UP parallel mechanism. With the aid of the theory of mechanism topology, the analysis of the topological characteristics of the 3UPS&UP parallel mechanism is presented, which shows that there are highly coupled motions and constraints amongst the limbs of the mechanism. Three methods for structure coupling-reducing of the 3UPS&UP parallel mechanism are proposed, resulting in eight new types of 1T2R parallel mechanisms with one or zero coupling degree. One obtained parallel mechanism is taken as an example to demonstrate that a mechanism with zero coupling degree has an explicit form for forward kinematics. The process of type synthesis is in the order of permutation and combination; therefore, there are no omissions. This method is also applicable to other configurations, and novel topological structures having simple forward kinematics can be obtained from an original mechanism via this method.

scholarly journals Design of Self-Reconfigurable Multiarm Robot Mechanism Based on Deployable Kinematic Chains

2020 ◽  
Vol 33 (1) ◽  
Author(s):  
Fu-Qun Zhao ◽  
Sheng Guo ◽  
Hai-Jun Su ◽  
Hai-Bo Qu ◽  
Ya-Qiong Chen
Keyword(s):  
Parallel Mechanism ◽  
Parallel Mechanisms ◽  
Kinematic Chains ◽  
Assembly Method ◽  
Operation Modes ◽  
Object Based ◽  
Switch Operation ◽  
Storage Area ◽  
Mechanism Theory

Abstract As the structures of multiarm robots are serially arranged, the packaging and transportation of these robots are often inconvenient. The ability of these robots to operate objects must also be improved. Addressing this issue, this paper presents a type of multiarm robot that can be adequately folded into a designed area. The robot can achieve different operation modes by combining different arms and objects. First, deployable kinematic chains (DKCs) are designed, which can be folded into a designated area and be used as an arm structure in the multiarm robot mechanism. The strategy of a platform for storing DKCs is proposed. Based on the restrictions in the storage area and the characteristics of parallel mechanisms, a class of DKCs, called base assembly library, is obtained. Subsequently, an assembly method for the synthesis of the multiarm robot mechanism is proposed, which can be formed by the connection of a multiarm robot mechanism with an operation object based on a parallel mechanism structure. The formed parallel mechanism can achieve a reconfigurable characteristic when different DKCs connect to the operation object. Using this method, two types of multiarm robot mechanisms with four DKCs that can switch operation modes to perform different tasks through autonomous combination and release operation is proposed. The obtained mechanisms have observable advantages when compared with the traditional mechanisms, including optimizing the occupied volume during transportation and using parallel mechanism theory to analyze the switching of operation modes.

scholarly journals Constraint and Mobility Change Analysis of Rubik’s Cube-inspired Reconfigurable Joints and Corresponding Parallel Mechanisms

2020 ◽  
Vol 33 (1) ◽  
Author(s):  
Duanling Li ◽  
Pu Jia ◽  
Jiazhou Li ◽  
Dan Zhang ◽  
Xianwen Kong
Keyword(s):  
Parallel Mechanism ◽  
Unique Feature ◽  
Theoretical Method ◽  
Geometric Constraint ◽  
Parallel Mechanisms ◽  
Change Analysis ◽  
Application Range ◽  
And Topology ◽  
Physical Experiments ◽  
Underlying Principle

Abstract The current research of reconfigurable parallel mechanism mainly focuses on the construction of reconfigurable joints. Compared with the method of changing the mobility by physical locking joints, the geometric constraint has good controllability, and the constructed parallel mechanism has more configurations and wider application range. This paper presents a reconfigurable axis (rA) joint inspired and evolved from Rubik's Cubes, which have a unique feature of geometric and physical constraint of axes of joint. The effectiveness of the rA joint in the construction of the limb is analyzed, resulting in a change in mobility and topology of the parallel mechanism. The rA joint makes the angle among the three axes inside the groove changed arbitrarily. This change in mobility is completed by the case illustrated by a 3(rA)P(rA) reconfigurable parallel mechanism having variable mobility from 1 to 6 and having various special configurations including pure translations, pure rotations. The underlying principle of the metamorphosis of this rA joint is shown by investigating the dependence of the corresponding screw system comprising of line vectors, leading to evolution of the rA joint from two types of spherical joints to three types of variable Hooke joints and one revolute joint. The reconfigurable parallel mechanism alters its topology by rotating or locking the axis of rA joint to turn all limbs into different phases. The prototype of reconfigurable parallel mechanism is manufactured and all configurations are enumerated to verify the validity of the theoretical method by physical experiments.

scholarly journals An Adaptive RBF-NMPC Architecture for Trajectory Tracking Control of Underwater Vehicles

Machines ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 105
Author(s):  
Zhenzhong Chu ◽  
Da Wang ◽  
Fei Meng
Keyword(s):  
Model Predictive Control ◽  
Prediction Model ◽  
Real Time ◽  
Predictive Control ◽  
Trajectory Tracking ◽  
Tracking Control ◽  
Working Environment ◽  
Gray Wolf ◽  
Trajectory Tracking Control ◽  
System Output

An adaptive control algorithm based on the RBF neural network (RBFNN) and nonlinear model predictive control (NMPC) is discussed for underwater vehicle trajectory tracking control. Firstly, in the off-line phase, the improved adaptive Levenberg–Marquardt-error surface compensation (IALM-ESC) algorithm is used to establish the RBFNN prediction model. In the real-time control phase, using the characteristic that the system output will change with the external environment interference, the network parameters are adjusted by using the error between the system output and the network prediction output to adapt to the complex and uncertain working environment. This provides an accurate and real-time prediction model for model predictive control (MPC). For optimization, an improved adaptive gray wolf optimization (AGWO) algorithm is proposed to obtain the trajectory tracking control law. Finally, the tracking control performance of the proposed algorithm is verified by simulation. The simulation results show that the proposed RBF-NMPC can not only achieve the same level of real-time performance as the linear model predictive control (LMPC) but also has a superior anti-interference ability. Compared with LMPC, the tracking performance of RBF-NMPC is improved by at least 43% and 25% in the case of no interference and interference, respectively.

scholarly journals Finite-Horizon Kinetic Energy Optimization of a Redundant Space Manipulator

2021 ◽  
Vol 11 (5) ◽  
pp. 2346
Author(s):  
Alessandro Tringali ◽  
Silvio Cocuzza
Keyword(s):  
Kinetic Energy ◽  
Real Time ◽  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Computational Time ◽  
Redundant Manipulators ◽  
Space Robotics ◽  
Optimal Method ◽  
End Effector ◽  
Global Optimal

The minimization of energy consumption is of the utmost importance in space robotics. For redundant manipulators tracking a desired end-effector trajectory, most of the proposed solutions are based on locally optimal inverse kinematics methods. On the one hand, these methods are suitable for real-time implementation; nevertheless, on the other hand, they often provide solutions quite far from the globally optimal one and, moreover, are prone to singularities. In this paper, a novel inverse kinematics method for redundant manipulators is presented, which overcomes the above mentioned issues and is suitable for real-time implementation. The proposed method is based on the optimization of the kinetic energy integral on a limited subset of future end-effector path points, making the manipulator joints to move in the direction of minimum kinetic energy. The proposed method is tested by simulation of a three degrees of freedom (DOF) planar manipulator in a number of test cases, and its performance is compared to the classical pseudoinverse solution and to a global optimal method. The proposed method outperforms the pseudoinverse-based one and proves to be able to avoid singularities. Furthermore, it provides a solution very close to the global optimal one with a much lower computational time, which is compatible for real-time implementation.

High-performance light trajectory tracking and image sensing devices based on a γ-In2Se3/GaAs heterostructure

2020 ◽  
Vol 8 (39) ◽  
pp. 13762-13769
Author(s):  
Jing-Wei Kang ◽  
Chao Zhang ◽  
Kai-Jun Cao ◽  
Yu Lu ◽  
Chun-Yan Wu ◽  
...  
Keyword(s):  
Real Time ◽  
Trajectory Tracking ◽  
High Performance ◽  
Linear Array ◽  
Image Sensing ◽  
Optoelectronic Applications

A high-performance γ-In2Se3/GaAs heterostructure-based photodetector linear array shows potential in optoelectronic applications such as real-time light trajectory tracking and image sensing.

scholarly journals Dynamic response analysis for multi-degrees-of-freedom parallel mechanisms with various types of three-dimensional clearance joints

2021 ◽  
Vol 18 (3) ◽  
pp. 172988142110177
Author(s):  
Jia Yonghao ◽  
Chen Xiulong
Keyword(s):  
Dynamic Response ◽  
Multibody Systems ◽  
Parallel Mechanism ◽  
Three Dimensional ◽  
Response Analysis ◽  
Parallel Mechanisms ◽  
Dynamics Model ◽  
Clearance Joints ◽  
Clearance Joint ◽  
Spatial Parallel Mechanism

For spatial multibody systems, the dynamic equations of multibody systems with compound clearance joints have a high level of nonlinearity. The coupling between different types of clearance joints may lead to abundant dynamic behavior. At present, the dynamic response analysis of the spatial parallel mechanism considering the three-dimensional (3D) compound clearance joint has not been reported. This work proposes a modeling method to investigate the influence of the 3D compound clearance joint on the dynamics characteristics of the spatial parallel mechanism. For this purpose, 3D kinematic models of spherical clearance joint and revolute joint with radial and axial clearances are derived. Contact force is described as normal contact and tangential friction and later introduced into the nonlinear dynamics model, which is established by the Lagrange multiplier technique and Jacobian of constraint matrix. The influences of compound clearance joint and initial misalignment of bearing axes on the system are analyzed. Furthermore, validation of dynamics model is evaluated by ADAMS and Newton–Euler method. This work provides an essential theoretical basis for studying the influences of 3D clearance joints on dynamic responses and nonlinear behavior of parallel mechanisms.

Sign in / Sign up

Export Citation Format

Share Document