Measurement of Local Temperatures Using µ-Raman of SiC and AlGaN-GaN/SiC Power and RF Devices

2008 ◽  
Vol 600-603 ◽  
pp. 1111-1114 ◽  
Author(s):  
Orest J. Glembocki ◽  
Joshua D. Caldwell ◽  
Jeffrey A. Mittereder ◽  
Jeffrey P. Calame ◽  
Steven C. Binari ◽  
...  

Confocal μ-Raman was used to measure the operating temperatures in SiC MESFETS, AlGaN/GaN/SiC HEMT’s and 4H-SiC PiN diodes. Temperatures obtained from thermal imaging of the MESFETS compared well with those measured from Raman scattering. Operating temperatures were also obtained for large area PiN diode and it was shown that a single point at the center of the device can be used to measure the average temperature.

2008 ◽  
Vol 600-603 ◽  
pp. 931-934 ◽  
Author(s):  
Brett A. Hull ◽  
Joseph J. Sumakeris ◽  
Michael J. O'Loughlin ◽  
Q. Jon Zhang ◽  
Jim Richmond ◽  
...  

DC characteristics and reverse recovery performance of 4H-SiC Junction Barrier Schottky (JBS) diodes capable of blocking in excess of 10 kV with forward conduction of 20 A at a forward voltage of less than 4 V are described. Performance comparisons are made to a similarly rated 10 kV 4H-SiC PiN diode. The JBS diodes show a significant improvement in reverse recovery stored charge as compared to PiN diodes, showing half of the stored charge at 25°C and a quarter of the stored charge at 125°C when switched to 3 kV blocking. These large area JBS diodes were also employed to demonstrate the tremendous advances that have recently been made in 4H-SiC substrate quality.


Electronics ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 476
Author(s):  
Umer Farooq ◽  
Adnan Iftikhar ◽  
Muhammad Farhan Shafique ◽  
Muhammad Saeed Khan ◽  
Adnan Fida ◽  
...  

This paper presents a highly compact frequency-selective surface (FSS) that has the potential to switch between the X-band (8 GHz–12 GHz) and C-band (4 GHz–8 GHz) for RF shielding applications. The proposed FSS is composed of a square conducting loop with inward-extended arms loaded with curved extensions. The symmetric geometry allows the RF shield to perform equally for transverse electric (TE), transverse magnetic (TM), and 45° polarizations. The unit cell has a dimension of 0.176 λ0 and has excellent angular stability up to 60°. The resonance mechanism was investigated using equivalent circuit models of the shield. The design of the unit element allowed incorporation of PIN diodes between adjacent elements for switching to a lower C-band spectrum at 6.6 GHz. The biasing network is on the bottom layer of the substrate to avoid effects on the shielding performance. A PIN diode configuration for the switching operation was also proposed. In simulations, the PIN diode model was incorporated to observe the switchable operation. Two prototypes were fabricated, and the switchable operation was demonstrated by etching copper strips on one fabricated prototype between adjacent unit cells (in lieu of PIN diodes) as a proof of the design prototypes. Comparisons among the results confirmed that the design offers high angular stability and excellent performance in both bands.


2015 ◽  
Vol 49 (3) ◽  
pp. 43-49 ◽  
Author(s):  
David P. Fries ◽  
Chase A. Starr ◽  
Geran W. Barton

AbstractMany common ocean sensor systems measure a localized space above a single sensor element. Single-point measurements give magnitude but not necessarily direction information. Expanding single sensor elements, such as used in salinity sensors, into arrays permits spatial distribution measurements and allows flux visualizations. Furthermore, applying microsystem technology to these macro sensor systems can yield imaging arrays with high-resolution spatial/temporal sensing functions. Extending such high spatial resolution imaging over large areas is a desirable feature for new “vision” modes on autonomous robotic systems and for deployable ocean sensor systems. The work described here explores the use of printed circuit board (PCB) technology for new sensing concepts and designs. In order to create rigid-conformal, large area imaging “camera” systems, we have merged flexible PCB substrates with rigid constructions from 3-D printing. This approach merges the 2-D flexible electronics world of printed circuits with the 3-D printed packaging world. Furthermore, employing architectures used by biology as a basis for our imaging systems, we explored naturally and biologically inspired designs, their relationships to visual imagining, and alternate mechanical systems of perception. Through the use of bio-inspiration, a framework is laid out to base further research on design for packaging of ocean sensors and arrays. Using 3-D printed exoskeleton's rigid form with flexible printed circuits, one can create systems that are both rigid and form-fitting with 3-D shape and enable new sensor systems for various ocean sensory applications.


2010 ◽  
Author(s):  
Joshua D. Caldwell ◽  
Orest J. Glembocki ◽  
Ronald W. Rendell ◽  
Sharka M. Prokes ◽  
James P. Long ◽  
...  

Author(s):  
Jan-Laurens P.J. van der Steen ◽  
Laurens C.J.M. Peters ◽  
Edsger C.P. Smits ◽  
Peter Zalar ◽  
Gerwin H. Gelinck

2020 ◽  
Vol 33 ◽  
pp. 101099
Author(s):  
Eduardo Meraz Trejo ◽  
Xavier Jimenez ◽  
Kazi Md Masum Billah ◽  
Jonathan Seppala ◽  
Ryan Wicker ◽  
...  

Author(s):  
Dethard Peters ◽  
Rudolf Elpelt ◽  
Reinhold Schörner ◽  
Karl-Otto Dohnke ◽  
Peter Friedrichs ◽  
...  
Keyword(s):  

2018 ◽  
Vol 8 (12) ◽  
pp. 2693 ◽  
Author(s):  
Philippe Massicotte ◽  
Guislain Bécu ◽  
Simon Lambert-Girard ◽  
Edouard Leymarie ◽  
Marcel Babin

The vertical diffuse attenuation coefficient for downward plane irradiance ( K d ) is an apparent optical property commonly used in primary production models to propagate incident solar radiation in the water column. In open water, estimating K d is relatively straightforward when a vertical profile of measurements of downward irradiance, E d , is available. In the Arctic, the ice pack is characterized by a complex mosaic composed of sea ice with snow, ridges, melt ponds, and leads. Due to the resulting spatially heterogeneous light field in the top meters of the water column, it is difficult to measure at single-point locations meaningful K d values that allow predicting average irradiance at any depth. The main objective of this work is to propose a new method to estimate average irradiance over large spatially heterogeneous area as it would be seen by drifting phytoplankton. Using both in situ data and 3D Monte Carlo numerical simulations of radiative transfer, we show that (1) the large-area average vertical profile of downward irradiance, E d ¯ ( z ) , under heterogeneous sea ice cover can be represented by a single-term exponential function and (2) the vertical attenuation coefficient for upward radiance ( K L u ), which is up to two times less influenced by a heterogeneous incident light field than K d in the vicinity of a melt pond, can be used as a proxy to estimate E d ¯ ( z ) in the water column.


Sign in / Sign up

Export Citation Format

Share Document