Characterization of Clays Used in the Fabrication of Traditional Brazilian Ceramic Pans: Culture and Technique

2010 ◽  
Vol 660-661 ◽  
pp. 718-723
Author(s):  
Monica Castoldi Borlini Gadioli ◽  
Mariane Costalonga de Aguiar ◽  
Carlos Maurício Fontes Vieira ◽  
Sérgio Neves Monteiro
Keyword(s):  
Popular Culture ◽  
The State ◽  
Raw Material ◽  
High Plasticity ◽  
X Ray Diffraction ◽  
X Ray ◽  
State Capital ◽  
Traditional Production ◽  
Alkaline Oxides

The fabrication process of clay pans in the state of Espírito Santo, southeast of Brazil, is a recognized part of the country’s popular culture. In Goiabeiras, a district of the state capital Vitória, the traditional production of these pans is the source of income for many families. The technique used in these ceramic pans is of indigenous origin, characterized by manual molding, outdoor burning and application of tannin dye. The clay pans are distributed to several Brazilian states and are nowadays conquering the external market. For producing these pans, two types of, yellow and gray, clays are used. The actual source of raw material comes from the deposit of the Mulembá valley, where a concern on the possibility of exhaustion exists. The objective of this study was then to characterize these two types of clays and so contribute to the continuity of traditional clay pan production by knowing the characteristics of the local clays in case of an eventual need for their replacement. Chemical analysis, X-ray diffraction, particle size distribution, plasticity and thermal analysis of the clays were performed. The results showed that the clays are high plasticity kaolinite with considerable amounts of SiO2 and Al2O3 as well as of alkaline oxides, earth alkaline oxides and Fe2O3.

Characterization and A Preliminary Study of TiO2 Synthesis from Lampung Iron Sand

2020 ◽  
Vol 849 ◽  
pp. 113-118
Author(s):  
Yayat Iman Supriyatna ◽  
Slamet Sumardi ◽  
Widi Astuti ◽  
Athessia N. Nainggolan ◽  
Ajeng W. Ismail ◽  
...  
Keyword(s):  
Food Packaging ◽  
Xrd Analysis ◽  
Major Elements ◽  
Raw Material ◽  
Solid Residue ◽  
X Ray Diffraction ◽  
X Ray ◽  
Leaching Solution ◽  
Ti Content

The purpose of this study is to characterize Lampung iron sand and to conduct preliminary experiments on the TiO2 synthesis which can be used for the manufacturing of functional food packaging. The iron sand from South Lampung Regency, Lampung Province that will be utilized as raw material. The experiment was initiated by sieving the iron sand on 80, 100, 150, 200 and 325 mesh sieves. Analysis using X-Ray Fluorescence (XRF) to determine the element content and X-Ray Diffraction (XRD) to observe the mineralization of the iron sand was conducted. The experiment was carried out through the stages of leaching, precipitation, and calcination. Roasting was applied firstly by putting the iron sand into the muffle furnace for 5 hours at a temperature of 700°C. Followed by leaching using HCl for 48 hours and heated at 105°C with a stirring speed of 300 rpm. The leaching solution was filtered with filtrate and solid residue as products. The solid residue was then leached using 10% H2O2 solution. The leached filtrate was heated at 105°C for 40 minutes resulting TiO2 precipitates (powder). Further, the powder was calcined and characterized. Characterization of raw material using XRF shows the major elements of Fe, Ti, Mg, Si, Al and Ca. The highest Ti content is found in mesh 200 with 9.6%, while iron content is about 80.7%. While from the XRD analysis, it shows five mineral types namely magnetite (Fe3O4), Rhodonite (Mn, Fe, Mg, Ca) SiO3, Quart (SiO2), Ilmenite (FeOTiO2) and Rutile (TiO2). The preliminary experiment showed that the Ti content in the synthesized TiO2 powder is 21.2%. The purity of TiO2 is low due to the presence of Fe metal which is dissolved during leaching, so that prior to precipitation purification is needed to remove impurities such as iron and other metals.

Preliminary Preparation and Characterization Studies of Cellulose from Merbau (Intsia bijuga)

2012 ◽  
Vol 620 ◽  
pp. 314-319
Author(s):  
Nur Amira Mamat Razali ◽  
Fauziah Abdul Aziz ◽  
Saadah Abdul Rahman
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Alkaline Treatment ◽  
Raw Material ◽  
X Ray Diffraction ◽  
X Ray ◽  
Preliminary Preparation ◽  
Characterization Studies ◽  
Scanning Electron

Hardwood is wood from angiosperm trees. The characteristic of hardwood include flowers, endosperm within seeds and the production of fruits that contain the seeds. This paper aims to discuss the preparation and characterization of cellulose obtained from hardwood. The hardwood Merbau (Intsia bijuga) was chosen as raw material in this study. Alkaline treatment and delignification methods were used for the preparation of cellulose. Acid hydrolysis was employed to produce cellulose nanocrystal (CNC). The treated and untreated samples were characterized using x-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM). The final product, from both trated and untreated samples were then compared.

scholarly journals Making and Characterization of Limnpo4 Using Solid State Reaction Method for Lithium Ion Battery Cathodes

2019 ◽  
pp. 583-588
Author(s):  
Adelyna Oktavia ◽  
Kurnia Sembiring ◽  
Slamet Priyono
Keyword(s):  
Solid State ◽  
Lithium Ion Battery ◽  
Lithium Ion ◽  
Solid State Reaction Method ◽  
Raw Material ◽  
X Ray Diffraction ◽  
Solid State Method ◽  
X Ray ◽  
General Investigation

Hospho-material of olivine, LiMnPO4 identified as promising for cathode material generation next Lithium-ion battery and has been successfully synthesized by solid-state method with Li2Co3, 2MnO2, 2NH4H2PO4 as raw material. The influence of initial concentration of precursors at kalsinasi temperatures (400-800 ° C) flows with nitrogen. The purity and composition phase verified by x-ray diffraction analysis (XRD), scanning electron microscopy (SEM), spectroscopy, energy Dispersive x-ray Analysis (EDS), Raman spectra. General investigation shows that there is a correlation between the concentration of precursors, the temperature and the temperature of sintering kalsinasi that can be exploited to design lithium-ion next generation.

Purification of Bentonite Clays from Cubati, PB, Brazil, for Diversified Applications

2014 ◽  
Vol 805 ◽  
pp. 486-491
Author(s):  
J.M.R. Figueirêdo ◽  
Juliana Melo Cartaxo ◽  
I.A. Silva ◽  
C.D. Silva ◽  
Gelmires Araújo Neves ◽  
...  
Keyword(s):  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Chemical Analysis ◽  
Laser Diffraction ◽  
The State ◽  
X Ray Diffraction ◽  
X Ray ◽  
Granulometric Analysis ◽  
Bentonite Clays

The State of Paraíba, Brazil, retains about 88.5% of all Brazilian bentonite, and much of this production comes from deposits in the District of Boa Vista, PB. Nevertheless, the deposits are almost depleted. Recently, new deposits were found, which will increases the reserves of the State, in the regions of Cubati and Pedra Lavrada, PB. The objective of this work is to characterize and develop purified clays, through sieving and hydrocycloning techniques, from those recently discovered bentonites for several applications. The characterization of the sample was done through granulometric analysis by laser diffraction, X-ray diffraction, chemical analysis by X-ray fluorescence, and thermogravimetric and differential thermal analysis. The results show that the samples are typical of bentonite clays, and that the purification solely by hydrocyclone presents the best results.

Mineralogical and geochemical characterization of archaeological ceramics from the 16th century El Badi Palace, Morocco

Clay Minerals ◽  
2018 ◽  
Vol 53 (3) ◽  
pp. 459-470
Author(s):  
Mouhssin El Halim ◽  
Lahcen Daoudi ◽  
Meriam El Ouahabi ◽  
Valérie Rousseau ◽  
Catherine Cools ◽  
...  
Keyword(s):  
Sixteenth Century ◽  
Chemical Characterization ◽  
Raw Material ◽  
Maximum Temperature ◽  
X Ray Diffraction ◽  
Archaeological Ceramics ◽  
Geochemical Characterization ◽  
X Ray ◽  
Firing Tests

ABSTRACTTextural, mineralogical and chemical characterization of archaeological ceramics (zellige) from El Badi Palace (Marrakech, Morocco), the main Islamic monument from the Saadian period (sixteenth century), has been performed to enhance restoration and to determine the technology of manufacturing. A multi-analytical approach based on optical and scanning electron microscopy, cathodoluminescence, X-ray fluorescence and X-ray diffraction was used. Re-firing tests on ceramic supports were also performed to determine the firing temperatures used by the Saadian artisans. A calcareous clay raw material was used to manufacture these decorative ceramics. The sherds were fired at a maximum temperature of 800°C in oxidizing atmosphere. The low firing temperature for ‘zellige’ facilitates cutting of the pieces, but also causes fragility in these materials due to the absence of vitreous phases.

Study of the Characterization of Smectitic Clays from a Town in the State of Paraíba

2015 ◽  
Vol 820 ◽  
pp. 51-55
Author(s):  
I.A. Silva ◽  
I.D.S. Pereira ◽  
W.S. Cavalcanti ◽  
F.K.A. Sousa ◽  
Gelmires Araújo Neves ◽  
...  
Keyword(s):  
Specific Area ◽  
Mineralogical Composition ◽  
Exchange Capacity ◽  
The State ◽  
Chemical Behavior ◽  
X Ray Diffraction ◽  
X Ray ◽  
Technological Improvements ◽  
The Town

The State of Paraíba has gained prominence in the production of raw bentonite in Brazil, where a new deposit has been found in the town of Sossego-PB, besides the deposit in the town of Boa Vista-PB. With the raise in the demand, the traditional reserves are depleting after several years of exploration, and this fact may result in a higher dependence on imported clays, thus existing a great interest in the discovery and characterization of new deposits, also guaranteeing technological improvements for the region. So, the objective of this work is to characterize the new deposits of the State of Paraíba, aiming at analyzing the characteristics the prove their classification as smectitic clays. The characterization was made through the analysis of chemical composition by X-ray fluorescence (EDX), X-ray diffraction (XRD), thermogravimetric analysis and thermal differential analyses (TG and DTA), cation-exchange capacity (CEC) and specific area (SA). The results prove that the studied samples presented, in their mineralogical composition, smectite, kaolinite and quartz, besides thermal and chemical behavior typical smectitic clays.

scholarly journals Characterization of avian eggshell waste aiming its use in a ceramic wall tile paste

Cerâmica ◽  
2006 ◽  
Vol 52 (324) ◽  
pp. 240-244 ◽  
Author(s):  
M. N. Freire ◽  
J. N. F. Holanda
Keyword(s):  
Wall Tile ◽  
Particle Size Analysis ◽  
Raw Material ◽  
Size Analysis ◽  
X Ray Diffraction ◽  
Critical Question ◽  
X Ray ◽  
Waste Sample ◽  
Eggshell Waste

In Brazil, the food industry generates every year huge amounts of avian eggshell waste, and a critical question is to find an adequate use for this waste. The aim of this work is to determine the chemical, mineralogical and physical characteristics of a nonprocessed avian eggshell waste sample, as well as to investigate its use in wall tile paste. The sample was analyzed regarding to chemical composition, X-ray diffraction, morphology, particle size analysis, density, organic matter, soluble salts, and thermal analysis. The results indicated that the eggshell waste sample rich in CaCO3 can be used as an alternative raw material in the production of wall tile materials.

scholarly journals Characterization of bentonite clay from 'Greda' deposit

2011 ◽  
Vol 5 (2) ◽  
pp. 97-101 ◽  
Author(s):  
Nadezda Stankovic ◽  
Mihovil Logar ◽  
Jelena Lukovic ◽  
Jelena Pantic ◽  
Miljana Miljevic ◽  
...  
Keyword(s):  
Ceramic Industry ◽  
Bentonite Clay ◽  
Nitrogen Adsorption ◽  
Raw Material ◽  
X Ray Diffraction ◽  
High Quality ◽  
X Ray ◽  
High Silica ◽  
Representative Samples

Based on mineralogical and technological investigations of the deposit 'Greda' important characteristics of bentonite clay were determined. Representative samples of the deposit were characterized with X-ray diffraction, low-temperature nitrogen adsorption, chemical analysis, differential thermal analysis and scanning electron microscopy. It was determined that the main mineral is montmorillonite and in subordinate quantities kaolinite, quartz and pyrite. The chemical composition generally shows high silica and alumina contents in all samples and small quantities of Fe3+, Ca2+ and Mg2+ cations. Based on technological and mineralogical research, bentonite from this deposit is a high-quality raw material for use in the ceramic industry.

Synthesis and Characterization of Phosphoric Silica Catalyst from Bamboo Leaves for Production of Triacetin

2022 ◽  
Vol 54 ◽  
pp. 129-137
Author(s):  
Renita Manurung ◽  
Muhammad Dedi Anggreawan ◽  
Alwi Gery Agustan Siregar
Keyword(s):  
High Performance ◽  
Catalytic Amount ◽  
Raw Material ◽  
Molar Ratio ◽  
Solid Catalyst ◽  
X Ray Diffraction ◽  
X Ray ◽  
Bamboo Leaves ◽  
Bamboo Leaf Ash

In this research, the bamboo leaf shows promise as an alternative raw material for silica production. This study investigated the performance of heterogeneous catalyst prepared from silica derived bamboo leaf ash after that impregnated with phosphoric acid at ratio various. The catalyst was characterized by X-Ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscope Energy Dispersive X-Ray Spectroscopy (SEM-EDS), Brunauer Emmet Teller (BET) and Barrett, Joyner and Halenda (BJH) method and triacetin product analyzed by GC-MS. The optimum condition phosphoric silica catalyst was obtained at phosphoric silica molar ratio of 1:2 and employed in the acetylation of glycerol, respectively. As result, 24 % selectivity for triacetin was obtained in the presence of catalytic amount 5%, molar ratio 1:9 at 100 °C for 4 hours. Bamboo leaf derived phosphoric silica calcined showed high potential to be used as an easy to prepare and high-performance solid catalyst for industrial scale.

Purification of Bentonite Clays from the District of Cubati, PB, for Obtainment of Organoclays for Use in Drilling Fluids

2012 ◽  
Vol 727-728 ◽  
pp. 1444-1450
Author(s):  
J.M.R. de Figueirêdo ◽  
Carla Dantas da Silva ◽  
Isabelle Albuquerque da Silva ◽  
Heber Sivini Ferreira ◽  
Gelmires Araújo Neves ◽  
...  
Keyword(s):  
Petroleum Industry ◽  
Diesel Oil ◽  
The State ◽  
Drilling Fluids ◽  
X Ray Diffraction ◽  
X Ray ◽  
Granulometric Analysis ◽  
Dta Analysis ◽  
Bentonite Clays

The main deposits of bentonite clays are located in the district of Boa Vista, in the State of Paraiba, Brazil. The random exploration of these deposits for many years is causing the clays to be depleted, and this will turn into a serious problem to the national petroleum industry. So, this work aims to study the characterization of new deposits of bentonite clays in the district of Cubati, in the State of Paraiba, Brazil, with the objective of developing purified organoclays, using a hydrocyclone, from ionic and non-ionic surfactants for use in drilling fluids. The characterization of the studied clay samples was done by applying the following techniques: granulometric analysis by laser diffraction (GA), X-ray diffraction (XRD) and chemical analysis by X-ray fluorescence (EDX) and thermogravimetric (TGA) and differential thermogravimetric (DTA) analysis. The characterization is typical of bentonites and the dispersions present rheological properties which meet Petrobras’ specifications for diesel oil media, organofilized with Praepagen WB.

Sign in / Sign up

Export Citation Format

Share Document