Management Model PDCA 90-10 Applied to Open Pit Mine Operations: Practical Example - Phosphate Mine at Araxá, MG - Brazil

2014 ◽  
Vol 805 ◽  
pp. 448-453
Author(s):  
Richardson Agra ◽  
Afonso Petta ◽  
Jonas Paulino ◽  
Giorgio de Tomi

The recent researches main focus in planning and operational mine management is the automation and technology implementation to support the decisions-making. In this context, practical experiences shows that big mining companies invests substantial quantities of resources on the purchase and implementation of software packs to manage their mine operations. These actions itself, generally doesn ́t ensure the expected results. This paper presents a study related to mining operations management with a successful application example at a phosphate mine located at Araxá, State of Minas Gerais, Brazil. To this, it was applied a so-called Model PDCA 90-10 of planning and operational mine management. This proposal complements the state-of-the-art in technology and TI for the integration between planning and mine operation. In the end, are presented conclusions and discussions related to the implementation viability of this management model in mining chain of processes.

Author(s):  
O.I. Litvin ◽  
Ya.O. Litvin ◽  
M.A. Tyulenev ◽  
S.O. Markov

The backhoe hydraulic shovels (backhoes) have been widely used in open-pit mining operations in the Kuznetsk coal basin since the early 2000s. Now their number is growing every year, both because new operations begin on new sites, and because of the backhoe advantages. However, up to now parameters of their operation, more particularly the parameters of the face blocks, are often taken according to the actual data, i.e. based on the accumulated experience of the mining companies, and are not calculated using the approved scientifically validated methods. In the given article the authors give some preconditions for creation of a uniform methodology to calculate parameters of the face blocks depending on mining-geological and miningtechnical conditions. It is noted that the manufacturers of excavation equipment quote the data corresponding to the maximum possible parameters of the equipment operation, in particular the height of the excavated layer, as a result of which it is rather difficult to apply this in practice. Preliminary conclusions about the need to take into account the diversity of the above conditions and their interrelation with the parameters of a particular model of the excavation and loading equipment have been made.


2021 ◽  
Vol 13 (2) ◽  
pp. 470
Author(s):  
Marat Rudakov ◽  
Elena Gridina ◽  
Jürgen Kretschmann

This article deals with the role and the place of risk-based thinking in today’s occupational safety and health (OSH) systems used by mining companies. A brief survey on modern challenges and pressures affecting companies, as well as on the structure of supply chains, is given. It is demonstrated that, despite all measures and actions that are being taken, occupational injuries in the mining sector: (a) remain a matter of serious concern and (b) should be examined and investigated through the lens of the company’s complexity. The objective of the article is two-fold: to trace the evolution of risk-based thinking from quality management systems towards OSH management systems and to demonstrate how this approach can be implemented by a company performing open-pit mining operations. The matrix method along with the Fine and Kinney’s method was used in assessing OSH risks, and the checklist method along with a Strengths-Weaknesses-Opportunities-Threats (SWOT)analysis was used while assessing OSH opportunities. The results of the study make it possible to conclude that risk-based thinking incorporated into an OSH management system can be a robust and efficient instrument for OSH planning and implementation. This article contains an example of assessing OSH risks and opportunities for a dragline operator and also discusses the possible ways of using the data on the OSH risks and opportunities that were identified in OSH activities. The final part also contains comments and reflections on various risks mining companies are facing nowadays.


2009 ◽  
Vol 40 (1) ◽  
pp. 1-20 ◽  
Author(s):  
N. S. Alexander ◽  
G. Bick ◽  
R. Abratt ◽  
M. Bendixen

The aim of this study was to investigate the impact of the brand and product augmentation on the buyers of industrial tyres. While much has been studied about branding issues in B2C markets, very little research has been conducted in B2B markets. The research method used was a conjoint analysis experiment. The subjects were decision-making unit (DMU) members of open-pit mining companies in South Africa who purchased industrial tyres for mining operations. The results suggest that the brand is very important, followed by durability, and price. Differences of magnitude amongst the members of the DMU occurred. The impact of these findings as well as the implications for buyers and suppliers are discussed.


Author(s):  
V. V. Agafonov ◽  
V. Yu. Zalyadinov ◽  
M. E. Yusupov ◽  
N. S. Bikteeva

Sustainability of mining companies is of of high concern. The problem is specifically acute at companies that are monotownor monosettlement-forming. Sustainability of a mine depends in many ways on product quality and production resource-intensity. This article discusses formation of mineral quality indexes in terms of an open pit chrysotile mine. The studies took into account specific features of operation procedures implemented by each structural division of the mine. The analysis has found managerial and technological inconsistencies which affect quality and marketable product output, as well as efficiency of the mine in whole. The background for efficiency enhancement at a company is, by the authors’ opinion, consolidation of personnel subject to the single development strategy, namely: improvement of production and control efficiency, as well as use of available reserves and resources by means of better setup for production. The proposed approaches to planning mining operations and forming mineral quality allow higher quality of processing stock. In addition, a new model proposed for interaction between structural divisions of a mining company ensures improvement of general production indexes.


2019 ◽  
Vol 8 (30) ◽  
pp. 115-123
Author(s):  
A.A. Sobolev ◽  
◽  
G.V. Sekisov ◽  
A.Yu. Cheban ◽  
N.M. Litvinova ◽  
...  

2019 ◽  
Vol 105 ◽  
pp. 02006
Author(s):  
Tatiana Gvozdkova ◽  
Pawel Stefanek ◽  
Michaela Koščová

Ecological problems in the open pit mining of coal deposits are extremely hard, since mining operations are accompanied by disturbed land to a large depth with significant changes in the landscape, hydrometeorological conditions, mixing of rocks and removal of infertile or even harmful rocks with radioactive isotopes to the surface. Disturbed lands are unusable if they are not repaired. All man-made disturbances of the environment caused by open pit mining are divided into landscape (changes in terrain, vegetation and soil cover) and environmental (violation of living conditions within the allotment and adjacent lands: changes in water regime, pollution of the soil, air and water basins) onesOne of the most important areas in the field of environmental protection is the reclamation (restoration) of the earth’s surface. In accordance with the requirements of the protection of the subsoil, enterprises engaged in the development of mineral deposits are obliged at their own expense to bring disturbed lands into a state suitable form for their further use. Reclamation of ought to be carried out during open pit mining operations and must be completed after mining of mineral resources in the terms established by the authorities that provide land for use.


2021 ◽  
Vol 13 (12) ◽  
pp. 6971
Author(s):  
Mikhail Zarubin ◽  
Larissa Statsenko ◽  
Pavel Spiridonov ◽  
Venera Zarubina ◽  
Noune Melkoumian ◽  
...  

This research article presents a software module for the environmental impact assessment (EIA) of open pit mines. The EIA software module has been developed based on the comprehensive examination of both country-specific (namely, Kazakhstan) and current international regulatory frameworks, legislation and EIA methodologies. EIA frameworks and methods have been critically evaluated, and mathematical models have been developed and implemented in the GIS software module ‘3D Quarry’. The proposed methodology and software module allows for optimised EIA calculations of open pit mines, aiming to minimise the negative impacts on the environment. The study presents an original methodology laid out as a basis for a software module for environmental impact assessment on atmosphere, water basins, soil and subsoil, tailored to the context of mining operations in Kazakhstan. The proposed software module offers an alternative to commercial off-the-shelf software packages currently used in the mining industry and is suitable for small mining operators in post-Soviet countries. It is anticipated that applications of the proposed software module will enable the transition to sustainable development in the Kazakh mining industry.


2021 ◽  
Vol 21 (8) ◽  
pp. 131-134
Author(s):  
G. N. Nyusupova ◽  
◽  
S.V. Tursbekov ◽  
A.N. Musagalieva ◽  
Sh.A. Zhantueva ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document