Use of Composite Materials for FDM 3D Print Technology

2016 ◽  
Vol 862 ◽  
pp. 174-181 ◽  
Author(s):  
Jiří Šafka ◽  
Michal Ackermann ◽  
Jiří Bobek ◽  
Martin Seidl ◽  
Jiří Habr ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Fused Deposition Modelling ◽  
Two Phase ◽  
3D Print ◽  
Fused Deposition ◽  
Thermoplastic Matrix ◽  
Constant Diameter ◽  
Phase Systems ◽  
Progressive Technology

This article deals with specific polymer composites modified for the Fused Deposition Modelling (FDM) which is a 3D print technology. These two phase systems involve thermoplastic matrix filled with natural fibres. The crucial demand of this progressive technology is put on the accuracy of the semi-product formed into the filament shape. To reach the smooth production of 3D prototypes the filament should have a constant diameter. In the article, individual steps of the polymer composite pelletization and following pre-processing and processing activities are described. Among these steps the extrusion of the filaments belongs and subsequent print test on “RepRap” device accompanied by optimization of building parameters. Tensile specimens were chosen for print with regard to maps mechanical properties of this newly developed material which was the final stage of this work. Tensile test curves were then compared with those graphs which can be found for the material produced by conventional technologies such as injection moulding.

scholarly journals 3D Printing of Drug-Loaded Thermoplastic Polyurethane Meshes: A Potential Material for Soft Tissue Reinforcement in Vaginal Surgery

Pharmaceutics ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 63 ◽  
Author(s):  
Juan Domínguez-Robles ◽  
Caterina Mancinelli ◽  
Elena Mancuso ◽  
Inmaculada García-Romero ◽  
Brendan F. Gilmore ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermoplastic Polyurethane ◽  
Vaginal Surgery ◽  
Pelvic Organ ◽  
Attenuated Total Reflection ◽  
Fused Deposition Modelling ◽  
Suitable Material ◽  
3D Print ◽  
Fused Deposition ◽  
Poly Propylene

Current strategies to treat pelvic organ prolapse (POP) or stress urinary incontinence (SUI), include the surgical implantation of vaginal meshes. Recently, there have been multiple reports of issues generated by these meshes conventionally made of poly(propylene). This material is not the ideal candidate, due to its mechanical properties leading to complications such as chronic pain and infection. In the present manuscript, we propose the use of an alternative material, thermoplastic polyurethane (TPU), loaded with an antibiotic in combination with fused deposition modelling (FDM) to prepare safer vaginal meshes. For this purpose, TPU filaments containing levofloxacin (LFX) in various concentrations (e.g., 0.25%, 0.5%, and 1%) were produced by extrusion. These filaments were used to 3D print vaginal meshes. The printed meshes were fully characterized through different tests/analyses such as fracture force studies, attenuated total reflection-Fourier transform infrared, thermal analysis, scanning electron microscopy, X-ray microcomputed tomography (μCT), release studies and microbiology testing. The results showed that LFX was uniformly distributed within the TPU matrix, regardless the concentration loaded. The mechanical properties showed that poly(propylene) (PP) is a tougher material with a lower elasticity than TPU, which seemed to be a more suitable material due to its elasticity. In addition, the printed meshes showed a significant bacteriostatic activity on both Staphylococcus aureus and Escherichia coli cultures, minimising the risk of infection after implanting them. Therefore, the incorporation of LFX to the TPU matrix can be used to prepare anti-infective vaginal meshes with enhanced mechanical properties compared with current PP vaginal meshes.

Investigations on 3D printed thermosetting and ceramic-reinforced recycled thermoplastic-based functional prototypes

2019 ◽  
pp. 089270571986462 ◽  
Author(s):  
Rupinder Singh ◽  
Ranvijay Kumar ◽  
Inderpreet Singh
Keyword(s):  
Mechanical Properties ◽  
3D Printing ◽  
Surface Hardness ◽  
Acrylonitrile Butadiene Styrene ◽  
Experimental Investigations ◽  
Fused Deposition Modelling ◽  
Ceramic Particles ◽  
Fused Deposition ◽  
Thermoplastic Matrix ◽  
3D Printed

The 3D printing of thermoplastic polymers (both virgin and reinforced with metal/ceramic particles) has been widely explored in recent past with fused deposition modelling (FDM) process. But hitherto very little has been reported on 3D printing of thermoplastics polymers with reinforcement of thermosetting polymers and ceramic particles. This article is an extension of work reported on thermo-mechanical investigations on waste thermosetting polymer bakelite and ceramic (silicon carbide and aluminium oxide) as reinforcement in recycled acrylonitrile butadiene styrene (ABS) thermoplastic matrix for sustainability. The study reports the experimental investigations on mechanical (tensile), morphological, surface hardness and thermal stability analysis of 3D printed functional prototype as tensile specimen (as per ASTM D 638). In the present case study, it has been ascertained that composition/proportion of thermoplastic matrix has a significant role in controlling the mechanical properties, whereas other input process parameters of FDM are insignificant. The results of the study suggest that thermosetting and ceramic-reinforced ABS thermoplastic-based 3D printed parts have mechanical properties at par with unreinforced ABS.

scholarly journals Current State and Challenges of Natural Fibre-Reinforced Polymer Composites as Feeder in FDM-Based 3D Printing

Polymers ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 2289
Author(s):  
Nishata Royan Rajendran Royan ◽  
Jie Sheng Leong ◽  
Wai Nam Chan ◽  
Jie Ren Tan ◽  
Zainon Sharmila Binti Shamsuddin
Keyword(s):  
Mechanical Properties ◽  
Natural Fibre ◽  
Critical Discussion ◽  
Fused Deposition Modelling ◽  
Preparation Methods ◽  
Fused Deposition ◽  
Current State ◽  
Future Challenges ◽  
Raster Angle ◽  
Fibre Reinforced Polymer

As one of the fastest-growing additive manufacturing (AM) technologies, fused deposition modelling (FDM) shows great potential in printing natural fibre-reinforced composites (NFRC). However, several challenges, such as low mechanical properties and difficulty in printing, need to be overcome. Therefore, the effort to improve the NFRC for use in AM has been accelerating in recent years. This review attempts to summarise the current approaches of using NFRC as a feeder for AM. The effects of fibre treatments, composite preparation methods and addition of compatibilizer agents were analysed and discussed. Additionally, current methods of producing feeders from NFRCs were reviewed and discussed. Mechanical property of printed part was also dependent on the printing parameters, and thus the effects of printing temperature, layer height, infill and raster angle were discussed, and the best parameters reported by other researchers were identified. Following that, an overview of the mechanical properties of these composites as reported by various researchers was provided. Next, the use of optimisation techniques for NFRCs was discussed and analysed. Lastly, the review provided a critical discussion on the overall topic, identified all research gaps present in the use of NFRC for AM processes, and to overcome future challenges.

Effect of heat treatment on mechanical properties of 3D printed polylactic acid parts

2021 ◽  
Vol 63 (1) ◽  
pp. 73-78
Author(s):  
Pulkin Gupta ◽  
Sudha Kumari ◽  
Abhishek Gupta ◽  
Ankit Kumar Sinha ◽  
Prashant Jindal
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Polylactic Acid ◽  
Recrystallization Temperature ◽  
Fused Deposition Modelling ◽  
Fused Deposition ◽  
Dog Bone ◽  
Heat Treated ◽  
Maximum Decrease ◽  
3D Printed

Abstract Fused deposition modelling (FDM) is a layer-by-layer manufacturing process type of 3D-printing (3DP). Significant variation in the mechanical properties of 3D printed specimens is observed because of varied process parameters and interfacial bonding between consecutive layers. This study investigates the influence of heat treatment on the mechanical strength of FDM 3D printed Polylactic acid (PLA) parts with constant 3DP parameters and ambient conditions. To meet the objectives, 7 sets, each containing 5 dog-bone shaped samples, were fabricated from commercially available PLA filament. Each set was subjected to heat treatment at a particular temperature for 1 h and cooled in the furnace itself, while one set was left un-treated. The temperature for heat treatment (Th) varied from 30 °C to 130 °C with increments of 10 °C. The heat-treated samples were characterized under tensile loading of 400 N and mechanical properties like Young’s modulus (E), Strain % ( ε ) and Stiffness (k) were evaluated. On comparing the mechanical properties of heat-treated samples to un-treated samples, significant improvements were observed. Heat treatment also altered the geometries of the samples. Mechanical properties improved by 4.88 % to 10.26 % with the maximum being at Th of 110 °C and below recrystallization temperature (Tr) of 65 °C. Deformations also decreased significantly at higher temperatures above 100 °C, by a maximum of 36.06 %. The dimensions of samples showed a maximum decrease of 1.08 % in Tr range and a maximum decrease of 0.31 % in weight at the same temperature. This study aims to benefit the society by establishing suitable Th to recover the lost strength in PLA based FDM 3D printed parts.

scholarly journals Dynamic Mechanical Properties of Fused Deposition Modelling Processed Polyphenylsulfone Material

2016 ◽  
Vol 9 (1) ◽  
pp. 1-11 ◽  
Author(s):  
Bolin Huang ◽  
S.H. Masood ◽  
Mostafa Nikzad ◽  
Prabhu Raja Venugopal ◽  
Adhiyamaan Arivazhagan
Keyword(s):  
Mechanical Properties ◽  
Dynamic Mechanical Properties ◽  
Fused Deposition Modelling ◽  
Dynamic Mechanical ◽  
Fused Deposition

scholarly journals Evaluation of Reliefs’ Properties on Design of Thermoformed Packaging Using Fused Deposition Modelling Moulds.

Materials ◽  
2019 ◽  
Vol 12 (3) ◽  
pp. 478
Author(s):  
Lucía Rodríguez-Parada ◽  
Pedro F. Mayuet ◽  
Antonio J. Gámez
Keyword(s):  
Mechanical Properties ◽  
Physical Properties ◽  
Food Industry ◽  
Research Study ◽  
Comparative Data ◽  
Fused Deposition Modelling ◽  
Compression Tests ◽  
Fused Deposition ◽  
Packaging Industry

The increased consumption of food requiring thermoformed packaging implies that the packaging industry demands customized solutions in terms of shapes and sizes to make each packaging unique. In particular, food industry increasingly requires more transparent packaging, with greater clarity and a better presentation of the product they contain. However, in turn, the differentiation of packaging is sought through its geometry and quality, as well as the arrangement of food inside the packaging. In addition, these types of packaging usually include ribs in the walls to improve their physical properties. However, these ribs also affect the final aesthetics of the product. In accordance with this, this research study analyses the mechanical properties of different relief geometries that can affect not only their aesthetics but also their strength. For this purpose, tensile and compression tests were carried out using thermoformed PET sheets. The results provide comparative data on the reliefs studied and show that there are differences in the mechanical properties according to shape, size and disposition in the package.

Effect on infill density on mechanical properties of PETG part fabricated by fused deposition modelling

2020 ◽  
Vol 27 ◽  
pp. 1838-1842 ◽  
Author(s):  
R. Srinivasan ◽  
W. Ruban ◽  
A. Deepanraj ◽  
R. Bhuvanesh ◽  
T. Bhuvanesh
Keyword(s):  
Mechanical Properties ◽  
Fused Deposition Modelling ◽  
Fused Deposition
Sign in / Sign up

Export Citation Format

Share Document