SiGe Heterostructures-on-Insulator Produced by Ge+-Ion Implantation and Subsequent Hydrogen Transfer

2007 ◽  
Vol 131-133 ◽  
pp. 143-148 ◽  
Author(s):  
Ida E. Tyschenko ◽  
A.G. Cherkov ◽  
M. Voelskow ◽  
V.P. Popov

The properties of germanium implanted into the SiO2 layers in the vicinity of the bonding interface of silicon-on-insulator (SOI) structures are studied. It is shown that no germanium nanocrystals are formed in the buried SiO2 layer of the SOI structure as a result of annealing at the temperature of 1100° C. The implanted Ge atoms segregate at the Si/SiO2 bonding interface. In this case, Ge atoms are found at sites that are coherent with the lattice of the top silicon layer. It is found that the slope of the drain–gate characteristics of the back metal-oxide-semiconductor (MOS) transistors, prepared in the Ge+ ion implanted structures, increases. This effect is attributed to the grown hole mobility due to the contribution of an intermediate germanium layer formed at the Si/SiO2 interface.

2014 ◽  
Vol 116 (7) ◽  
pp. 074513 ◽  
Author(s):  
V. Mikhelashvili ◽  
D. Cristea ◽  
B. Meyler ◽  
S. Yofis ◽  
Y. Shneider ◽  
...  

2021 ◽  
Author(s):  
Deivakani M ◽  
Sumithra M.G ◽  
Anitha P ◽  
Jenopaul P ◽  
Priyesh P. Gandhi ◽  
...  

Abstract Semiconductor industry is still looking for the enhancement of breakdown voltage in Silicon on Insulator (SOI) Metal Oxide Semiconductor Field Effect Transistor (MOSFET). Thus, in this paper, heavy n-type doping below the channel is proposed for SOI MOSFET. Simulation of SOI MOSFET is carried out using 2D TCAD physical simulator. In the conventional device, with no p-type doping is used at the bottom silicon layer. While, in proposed device, p-type doping of 1×1018 cm-3 is used. Physical models are used in the simulation to achieve realistic performance. The models are mobility model, impact ionization model and ohmic contact model. Using TCAD simulation, electron/hole current density, impact generation, recombination and breakdown phenomena are analyzed. It is found that the proposed with p-type doping of 1×1018 cm-3 for SOI MOSFET yields high breakdown voltage. In contrast to conventional device, 20% improvement in breakdown voltage is achieved for proposed device.


Sign in / Sign up

Export Citation Format

Share Document