scholarly journals THE MEASUREMENT AND DISTRIBUTION OF WOOD DUST

2010 ◽  
Vol 41 (1) ◽  
pp. 25 ◽  
Author(s):  
Andrea Rosario Proto ◽  
Giuseppe Zimbalatti ◽  
Martino Negri
Keyword(s):  
Health And Safety ◽  
Qualitative Assessment ◽  
Dust Particles ◽  
Wood Dust ◽  
High Concentration ◽  
Dust Emissions ◽  
Carcinogenic Agents ◽  
Prevention Model ◽  
Number Of Particles

In Italy, the woodworking industry presents many issues in terms of occupational health and safety. This study on exposure to wood dust could contribute to the realization of a prevention model in order to limit exposure to carcinogenic agents to the worker. The sampling methodology illustrated the analysis of dust emissions from the woodworking machinery in operation throughout the various processing cycles. The quantitative and qualitative assessment of exposure was performed using two different methodologies. The levels of wood dust were determined according to EN indications and sampling was conducted using IOM and Cyclon personal samplers. The qualitative research of wood dust was performed using an advanced laser air particle counter. This allowed the number of particles present to be counted in real time. The results obtained allowed for an accurate assessment of the quality of the dust emitted inside the workplace during the various processing phases. The study highlighted the distribution of air particles within the different size classes, the exact number of both thin and ultra-thin dusts, and confirmed the high concentration of thin dust particles which can be very harmful to humans.

scholarly journals Influence of Grit Size and Wood Species on the Granularity of Dust Particles during Sanding

2020 ◽  
Vol 10 (22) ◽  
pp. 8165
Author(s):  
Marta Pędzik ◽  
Kinga Stuper-Szablewska ◽  
Maciej Sydor ◽  
Tomasz Rogoziński
Keyword(s):  
Particle Size ◽  
Grit Size ◽  
Dust Particles ◽  
Wood Dust ◽  
Particle Sizes ◽  
Respirable Fraction ◽  
Dust Fraction ◽  
The Mean ◽  
Oak Ash

Wood dust poses a threat to the health of employees and the risk of explosion and fire, accelerates the wear of machines, worsens the quality of processing, and requires large financial outlays for its removal. The aim of this study was to investigate the extent to which the grit size of sandpaper influences the size of the wood dust particles and the proportion of the finest particles which, when dispersed in the air, may constitute the respirable fraction. Six species of hardwood (beech, oak, ash, hornbeam, alder, and walnut), and three species of softwood (larch, pine, and spruce) were used in the research. While sanding the samples under the established laboratory conditions, the following were measured for two types of sandpapers (grit sizes P60 and P180): mean arithmetic particle size of dust and finest dust particles content (<10 µm). Based on the obtained results, we found that the largest dust particle sizes were obtained for alder, pine, and spruce; the smallest size of dust particles during sanding with both sandpapers was obtained for beech, hornbeam, oak, ash, larch, and walnut. The mean arithmetic particle sizes ranged from 327.98 µm for pine to 104.23 µm for hornbeam. The mean particle size of the dust obtained with P60 granulation paper was 1.4 times larger than that of the dust obtained with P180 granulation sandpaper. The content of the finest dust particles ranged from 0.21% for pine (P60 sandpaper) to 12.58% for beech (P180 sandpaper).The type of wood (hardwood or softwood) has a significant influence on the particle size and the content of the finest dust fraction.

A Study on IAQ in a Welding Laboratory

2013 ◽  
Vol 393 ◽  
pp. 947-952
Author(s):  
Ahmad Nazri Azmarini ◽  
Suhana Ab. Majid ◽  
Supa’at Hj Zakaria ◽  
Shaharin Anwar Sulaiman
Keyword(s):  
Air Quality ◽  
Relative Humidity ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Safety Concern ◽  
Health And Safety ◽  
Higher Learning ◽  
Dust Particles ◽  
Institutions Of Higher Learning

ndoor Air Quality (IAQ) has become an important occupational health and safety concern in educational environment at institutions of higher learning. In a survey conducted on a polytechnic in Malaysia, many of the students and lecturers expressed feeling of discomfort and uneasy due to resulting smoke from the welding activities while attending the workshop session. They felt that the room temperature and humidity also contributed to discomfort. Consequently, students had difficulties to concentrate and focus on their learning. The objective of this study was to determine the indoor air quality of a selected welding laboratory in the polytechnic comprising arc and gas welding stations. The important IAQ parameters considered in this study were the dry bulb air temperature, relative humidity, CO2 level and dust particles. Measurements were conducted using commercial IAQ instruments. From the study it was found that the levels of dust particles was higher than the recommended limit at times in the arc welding station. The CO2 level was observed acceptable in both welding stations. On relative humidity, a mixed result was found. Overall, the results implied that the welding laboratory require attention in meeting acceptable Indoor Air Quality.

THE THEVENARD ISLAND SAFETY CASE- APPROACHES USED TO DEVELOP AND IMPLEMENT A SAFETY CASE FOR AN EXISTING FACILITY

1997 ◽  
Vol 37 (1) ◽  
pp. 650
Author(s):  
B.W. Charko
Keyword(s):  
Joint Venture ◽  
Safety Management ◽  
Good Practice ◽  
Health And Safety ◽  
Qualitative Assessment ◽  
Formal Safety Assessment ◽  
Safety Case ◽  
Management Techniques ◽  
High Degree

As a proactive step in the management of Health and Safety, WAPET as operator on behalf of its Joint Venture Participants, considered it good practice to develop a Safety Case for the onshore component of the Thevenard Island facilities and operations along with the legislated offshore requirement. The development of the Safety Case utilised a process which incorporated qualitative assessment of risk, quantification of key risks and assurance that risks were as low as reasonably practicable. For this existing facility, the process clarified the quality of the existing hazard controls and provided an opportunity to make significant improvements.The process used ensured a high degree of employee and Regulator involvement throughout the Facility Description, Safety Management System and Formal Safety Assessment components of the Safety Case. This has achieved a high degree of awareness among the operations staff of risk management techniques. These techniques are now being applied routinely in the management of the operation.

Qualitative assessment of equipment failure cause finding and removal

2018 ◽  
pp. 116-126
Author(s):  
E. A. Vakulin ◽  
A. I. Zayats ◽  
V. A. Beklemeshev ◽  
V. A. Ivashkevich ◽  
V. A. Khazhiev ◽  
...  
Keyword(s):  
Production Condition ◽  
Real Life ◽  
Open Pit Mine ◽  
Qualitative Assessment ◽  
Open Pit ◽  
Quality Level ◽  
Equipment Failure ◽  
Operation Conditions ◽  
Failure Investigation

Investigation of failures is one of the critical activities of mining and haulage equipment operability assurance in mining. Maintaining failure investigation at the required quality level, it is possible to identify provisions, rules and procedures that should be revised or changed, operation conditions that should be improved, additional personnel training, if required, etc. Investigation of failures in mines is under responsibility of machine men and electricians of maintenance and operation services. In reality, factory management and setup for production condition weak concernment of these workers in quality investigation aimed at finding of sources of equipment failures. This article describes real-life results achieved in development and use of maintenance service operation, technology and management monitoring. The requirements are substantiated for quality improvement in failure cause finding and removal in mining and haulage equipment at Chernogorsky open pit mine, SUEK-Khakassia. Causes of the present quality of failure investigation by machine men of Chernogorsky Repair and Engineering Works and Chernogorsky open pit mine are revealed. The proposed recommended practices will improve quality of mining and haulage equipment failure investigation.

Ground water quality of selected areas of Punjab and Sind Provinces, Pakistan: Chemical and microbiological aspects

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Ionic Concentration ◽  
Chloride Ions ◽  
Potassium Ions ◽  
Ammonium Ions ◽  
High Concentration ◽  
Phosphate Ions ◽  
Sodium Magnesium ◽  
Very High ◽  
Microbiological Aspects

The assessment of groundwater is essential for the estimation of suitability of water for safe use. An attempt has been made to study the groundwater of selected areas of Punjab (Sheikhupura &amp; Sahiwal) and Sindh (Sindh, Jawar Dharki and Dharki), Pakistan. The results indicate that pH, color and odor were all within limits of WHO that is pH ranges 6.5–8.5, colorless and odorless, respectively. The high values of suspended solids were observed in the Sindh-1 and Dharki samples. Microbiologically only Sahiwal and Jawar Dharki were found fit for drinking purpose. Trace metals analysis of Sheikhupura-1 and Sindh-1 showed that values do not fall within limits of WHO for Iron. The ionic concentration analysis showed that high bicarbonate (HCO3-), ions are present in the samples of Sahiwal and Dharki; Sindh-1 and Jawar Dharki samples showed very high concentration for chloride ions, all samples were satisfactory level for sulphate (SO42-), sodium, magnesium and phosphate ions except samples of Sindh-1 and Jawar Dharki. High concentration of calcium and potassium ions was observed in samples of Sindh-1, while all other samples were found fit for drinking purposes in respect of nitrate, nitrite and ammonium ions. The high concentration of Fluoride was found only in Sheikhupura-2 samples.

scholarly journals Quantitative analysis of fine dust particles on moss surfaces under laboratory conditions using the example of Brachythecium rutabulum

2021 ◽  
Author(s):  
Bilitis Désirée Vanicela ◽  
Martin Nebel ◽  
Marielle Stephan ◽  
Christoph Riethmüller ◽  
Götz Theo Gresser
Keyword(s):  
Fine Fraction ◽  
Model Organism ◽  
Dust Particles ◽  
Quantitative Detection ◽  
Suitable Model ◽  
Fine Dust ◽  
Sem Images ◽  
Moss Species ◽  
Laboratory Conditions ◽  
Number Of Particles

AbstractThe identification of a model organism for investigations of fine dust deposits on moss leaflets was presented. An optical method with SEM enabled the quantitative detection of fine dust particles in two orders of magnitude. Selection criteria were developed with which further moss species can be identified in order to quantify the number of fine dust particles on moss surfaces using the presented method. Among the five moss species examined, B. rutabulum had proven to be the most suitable model organism for the method presented here. The number of fine dust particles on the moss surface of B. rutabulum was documented during 4 weeks of cultivation in the laboratory using SEM images and a counting method. The fine dust particles were recorded in the order of 10 μm–0.3 μm, divided into two size classes and counted. Under laboratory conditions, the number of particles of the fine fraction 2.4 μm–0.3 μm decreased significantly.

Automated Insulin Delivery Systems: Today, Tomorrow and User Requirements

2021 ◽  
pp. 193229682110299
Author(s):  
Marga Giménez ◽  
Ignacio Conget ◽  
Nick Oliver
Keyword(s):  
Lived Experience ◽  
Diabetes Management ◽  
Real Life ◽  
Insulin Delivery ◽  
Qualitative Assessment ◽  
Management Tool ◽  
Diabetes Distress ◽  
Glycemic Targets

Automated insulin delivery (AID) is the most recent advance in type 1 diabetes (T1D) management. It has the potential to achieve glycemic targets without disabling hypoglycemia, to improve quality of life and reduce diabetes distress and burden associated with self-management. Several AID systems are currently licensed for use by people with T1D in Europe, United States, and the rest of the world. Despite AID becoming a reality in routine clinical practice over the last few years, the commercially hybrid AID and other systems, are still far from a fully optimized automated diabetes management tool. Implementation of AID systems requires education and support of healthcare professionals taking care of people with T1D, as well as users and their families. There is much to do to increase usability, portability, convenience and to reduce the burden associated with the use of the systems. Co-design, involvement of people with lived experience of T1D and robust qualitative assessment is critical to improving the real-world use of AID systems, especially for those who may have greater need. In addition to this, information regarding the psychosocial impact of the use of AID systems in real life is needed. The first commercially available AID systems are not the end of the development journey but are the first step in learning how to optimally automate insulin delivery in a way that is equitably accessible and effective for people living with T1D.

scholarly journals iBikeSafe: A Multi-Parameter System for Monitoring, Evaluation and Visualization of Cycling Paths in Smart Cities Targeted at Cycling Adverse Conditions

Smart Cities ◽  
2021 ◽  
Vol 4 (3) ◽  
pp. 1058-1086
Author(s):  
Franklin Oliveira ◽  
Daniel G. Costa ◽  
Luciana Lima ◽  
Ivanovitch Silva
Keyword(s):  
Urban Areas ◽  
Smart Cities ◽  
Large City ◽  
Health And Safety ◽  
Parameter System ◽  
Urban Centers ◽  
Adverse Conditions ◽  
Last Mile ◽  
Real Scenario

The fast transformation of the urban centers, pushed by the impacts of climatic changes and the dramatic events of the COVID-19 Pandemic, will profoundly influence our daily mobility. This resulted scenario is expected to favor adopting cleaner and flexible modal solutions centered on bicycles and scooters, especially as last-mile options. However, as the use of bicycles has rapidly increased, cyclists have been subject to adverse conditions that may affect their health and safety when cycling in urban areas. Therefore, whereas cities should implement mechanisms to monitor and evaluate adverse conditions in cycling paths, cyclists should have some effective mechanism to visualize the indirect quality of cycling paths, eventually supporting choosing more appropriate routes. Therefore, this article proposes a comprehensive multi-parameter system based on multiple independent subsystems, covering all phases of data collecting, formatting, transmission, and processing related to the monitoring, evaluating, and visualizing the quality of cycling paths in the perspective of adverse conditions that affect cyclist. The formal interactions of all modules are carefully described, as well as implementation and deployment details. Additionally, a case study is considered for a large city in Brazil, demonstrating how the proposed system can be adopted in a real scenario.

scholarly journals Supranational Assessment of the Quality of Probiotics: Collaborative Initiative between Independent Accredited Testing Laboratories

2021 ◽  
Vol 9 (7) ◽  
pp. 1456
Author(s):  
Jean-Pol Warzée ◽  
Marina Elli ◽  
Abdoulaye Fall ◽  
Daniela Cattivelli ◽  
Jean-Yves François
Keyword(s):  
Daily Basis ◽  
Qualitative Assessment ◽  
Close Collaboration ◽  
Quality Label ◽  
Accredited Laboratories ◽  
Quantitative Analyses ◽  
Quality Of Food ◽  
The Eu

Recent acquisitions about the role of the microbiota in the functioning of the human body make it possible to envisage an increasing use of beneficial microbes, and more particularly of probiotics as well as their metabolites, as nutritional supplements. National and EU authorities are engaged in assuring the safety and quality of food supplements and in defining rules to assess and communicate their efficacy on human health. The quality of probiotics, intended as strains’ identification, viability, and stability over time, is a crucial factor of credibility with consumers and health professionals. Analytical technologies for the quality control of probiotics must also be adapted to new preparations, such as those including new multistrains complex combinations. Accredited laboratories face this relevant challenge on a daily basis. Through its close collaboration with the laboratory commissioned to produce the specifications for its ESLP quality label (identification and quantitative analyses) together with its scientific committee, the ESLP has been focusing on this issue for 10 years. Recently, as part of the internationalization of the ESLP quality label, a new and unique initiative in Europe for the evaluation of the quality of probiotic preparations has been carried out. The collaboration between two accredited laboratories in Belgium and in Italy represented a concrete example of supranational collaboration in the assessment of the quality of probiotic preparations. Results show that both laboratories are in line as expected in terms of performance. Common approaches to the qualitative assessment of probiotic preparations, especially for complex and composite recipes, in terms of number of strains and included substances, should be encouraged and promoted all over the EU.

Sign in / Sign up

Export Citation Format

Share Document