The Normal-Load and Sliding-Speed Dependence of the Coefficient of Friction, and Wear Particle Generation Contributing to Friction: High-Copper and Copper-Free Formulations

2019 ◽  
Author(s):  
Seong K. Rhee ◽  
Meechai Sriwiboon ◽  
Nipon Tiempan ◽  
Kritsana Kaewlob
Keyword(s):  
Coefficient Of Friction ◽  
Friction And Wear ◽  
Normal Load ◽  
Wear Particle ◽  
Sliding Speed ◽  
Particle Generation ◽  
High Copper ◽  
Speed Dependence ◽  
The Coefficient Of Friction

Effect of Micro-Size Cenosphere Content on Friction and Dry Sliding Wear Behavior of Vinylester Composites – A Taguchi Method

2012 ◽  
Vol 585 ◽  
pp. 569-573 ◽  
Author(s):  
S.R. Chauhan ◽  
Sunil Thakur
Keyword(s):  
Wear Rate ◽  
Coefficient Of Friction ◽  
Sliding Wear ◽  
Friction And Wear ◽  
Normal Load ◽  
Dry Sliding ◽  
Sliding Speed ◽  
Applied Normal Load ◽  
The Coefficient Of Friction ◽  
Sliding Distance

In this paper the friction and wear characteristics of vinylester and vinylester composites have been investigated under dry sliding conditions for different applied normal load, sliding speed and sliding distance. The experiments have been carried on a pin on disc arrangement at normal room temperature conditions. The influence of friction and wear parameters like normal load, speed, sliding distance and percentage of filler content on the friction and wear rate has been investigated. In this study, a plan of experiments based on the techniques of Taguchi was performed to acquire data in a controlled way. An orthogonal array L27 (313) and Analysis of variance (ANOVA) were applied to investigate the influence of process parameters on the coefficient of friction and sliding wear behaviour of these composites. The Taguchi design of experiment approach eliminates the need for repeated experiments and thus saves time, material and cost. The results showed that with increase in the applied normal load and sliding speed the coefficient of friction and specific wear rate decreases under dry sliding conditions. It is also found that a thin film formed on the counterface seems to be effective in improving the tribological characteristics. The results showed that the inclusion of cenosphere as filler materials in vinylester composites will increase the wear resistance of the composite significantly.

scholarly journals The Effect of Surface Texture on Lubricated Fretting

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 4886
Author(s):  
Agnieszka Lenart ◽  
Pawel Pawlus ◽  
Andrzej Dzierwa ◽  
Slawomir Wos ◽  
Rafal Reizer
Keyword(s):  
Coefficient Of Friction ◽  
Surface Texture ◽  
Friction And Wear ◽  
Normal Load ◽  
Disc Surface ◽  
The Coefficient Of Friction ◽  
42Crmo4 Steel ◽  
Ball Diameter ◽  
Steel Balls ◽  
Effect Of Surface

Experiments were conducted using an Optimol SRV5 tester in lubricated friction conditions. Steel balls from 100Cr6 material of 60 HRC hardness were placed in contact with 42CrMo4 steel discs of 47 HRC hardness and diversified surface textures. Tests were carried out at a 25–40% relative humidity. The ball diameter was 10 mm, the amplitude of oscillations was set to 0.1 mm, and the frequency was set to 80 Hz. Tests were performed at smaller (45 N) and higher (100 N) normal loads and at smaller (30 °C) and higher (90 °C) temperatures. During each test, the normal load and temperature were kept constant. We found that the disc surface texture had significant effects on the friction and wear under lubricated conditions. When a lower normal load was applied, the coefficient of friction and wear volumes were smaller for bigger disc surface heights. However, for a larger normal load a higher roughness corresponded to a larger coefficient of friction.

Characterization and modeling of friction and wear: an overview

2011 ◽  
Vol 2 (1) ◽  
pp. 19-28
Author(s):  
F. Al-Bender ◽  
K. De Moerlooze
Keyword(s):  
Coefficient Of Friction ◽  
High Performance ◽  
Friction And Wear ◽  
Normal Load ◽  
Traction Force ◽  
Friction Model ◽  
Virtual Design ◽  
Generic Models ◽  
The Coefficient Of Friction ◽  
Dynamics Models

In this age of virtual design, high-performance machines, and precise motion control, the abilityto characterize friction and wear processes and then to model and simulate them, becomes a pertinentissue. This communication gives a condensed overview of the generic characteristics of friction, thereafter,generic models, developed at KULeuven, PMA, are presented and discussed.with Leuven Air Bearings N.V. since Sept. 2010In regard to friction, both sliding and rolling are considered. The characterization concerns (i) therelationship between the friction (traction) force and the state of sliding of the system (displacement,velocity,…), at a given normal load; (ii) the relationship between the coefficient of friction and the normalload.As regards frictional behaviour in function of sliding (rolling) state, the main features are: (i) pre-sliding (prerolling) hysteresis and (ii) gross-sliding (rolling) dynamics. Models are presented that capture those featuresand relate them to the contact characteristics. Comparison with experimental results is also presented forthe main features. Secondly, the dependence of the coefficient of friction on the normal load is identifiedand modelled.Finally, regarding wear simulation, the generic friction model is extended to cater for an asperity populationthat changes during the lifetime of sliding. Based on fatigue considerations, asperities get broken after acertain number of contact cycles, and are replaced by smaller ones. With the aid of this model, we try tocorrelate energy dissipation with wear evolution, and support that by experimental observation.

scholarly journals Tribological studies of different bioimplant materials for orthopedic application using Taguchi experimental design

2021 ◽  
Vol 38 (3−4) ◽  
Author(s):  
Sachin Solanke ◽  
Vivek Gaval
Keyword(s):  
Weight Loss ◽  
Coefficient Of Friction ◽  
Friction And Wear ◽  
Normal Load ◽  
Individual Contribution ◽  
Sliding Velocity ◽  
Wear Weight Loss ◽  
Taguchi Design Of Experiments ◽  
The Coefficient Of Friction ◽  
Material Factor

In this research ball on disc wear tests have been carried out with ASTM G-99 standard at room temperature in simulated body fluid. The tribological property such as the coefficient of friction and wear weight loss was studied by using the Taguchi design of experiments. The design of the experiment was done using L8 orthogonal array to determine the collective contribution of the wear parameters. An analysis of variance demonstrated that the individual contribution of type of material factor was 97.15% and 66.66% for the coefficient of friction and wear weight loss respectively, which is the highest individual contribution as compared to other factors. It was concluded that the coefficient of friction and wear weight loss is mainly influenced by type of material factor. The analysis of the signal-to-noise ratio shows that the optimal coefficient of friction and wear weight loss was obtained with CoCrMo material at an applied normal load of 5 N with a sliding velocity of 0.05 m/s for a track diameter of 30 mm. To check the accuracy of results a confirmation test was carried out which indicates that predicted values are very close to the experimental values and the model is significant to predict the coefficient of friction. The results showed that the coefficient of friction and wear weight loss increases with increasing the applied load and sliding velocity. The microstructure of all substrates materials was analyzed using a scanning electron microscope. Wear track study showed that adhesive dominant wear mechanism for all four different substrate materials.

Paper 19: Unlubricated Sliding at High Speeds between Copper and Steel Surfaces

1966 ◽  
Vol 181 (15) ◽  
pp. 25-30 ◽  
Author(s):  
M. J. Kadhim ◽  
S. W. E. Earles
Keyword(s):  
Oxide Layer ◽  
Coefficient Of Friction ◽  
Normal Load ◽  
Sliding Speed ◽  
Wear Rates ◽  
High Speeds ◽  
Before And After ◽  
The Coefficient Of Friction ◽  
Steel Disc ◽  
Steel Surfaces

Experiments are described in which stationary copper specimens are rubbed in a normal atmosphere against a rotating S62 steel disc under normal loads up to 4·5 lbf. The coefficient of friction is measured at sliding speeds of 93, 220, 328, and 490 ft/s using ⅛-in diameter specimens. Except at the lowest speed a gradual buildup of a continuous copper oxide layer on the disc track is observed with increasing normal load together with a corresponding decrease in the coefficient of friction. Having established an oxide layer on the track the coefficient of friction observed is low for all normal loads. The coefficient of friction is shown to decrease with normal load N and sliding speed U, to be a function of N1/2 U, and to depend on the state of the disc surface. Wear of -in diameter specimens is measured by weighing before and after a test. The wear rate is shown to decrease with sliding speed and increase with load, and for speeds of 220 and 328 ft/s to be a function of N/U. The wear rates measured at 93 ft/s are the same function of N/U for low values of N/U.

Effect of contact temperature, normal load and dry sliding velocity on the coefficient of friction and wear behavior of nickel based super alloy

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Rama Krishna S. ◽  
Patta Lokanadham
Keyword(s):  
Coefficient Of Friction ◽  
Friction And Wear ◽  
Wear Behavior ◽  
Normal Load ◽  
Contact Temperature ◽  
Sliding Velocity ◽  
Friction And Wear Behavior ◽  
Alloy Material ◽  
The Coefficient Of Friction ◽  
Super Alloy

Purpose The purpose of the present paper aims to, study the coefficient of friction and wear behavior of nickel based super alloys used in manufacturing of gas and steam turbine blades. In present paper, parametric study focuses on normal load, dry sliding velocity and contact temperature influence on coefficient of friction and wear of a nickel based super alloy material. Design/methodology/approach Experimental investigation is carried out to know the effect of varying load at constant sliding velocity and varying sliding velocity at constant load on coefficient of friction and wear behavior of nickel based super alloy material. The experiments are carried out on a nickel based super alloy material using pin on disk apparatus by load ranging from 30 N to 90 N and sliding velocity from 1.34 m/s to 2.67 m/s. The contact temperature between pin and disk is measured using K-type thermocouple for all test conditions to know effect of contact temperature on coefficient of friction and wear behavior of nickel based super alloy material. Analytical calculations are carried out to find wear rate and wear coefficient of the test specimen and are compared with experimental results for validation of experimental setup. Regression equations are generated from experimental results to estimate coefficient of friction and wear in the range of test conditions. Findings From the experimental results, it is observed that by increasing the normal load or sliding velocity, the contact temperature between the pin and disk increases, the coefficient of friction decreases and wear increases. Analysis of variance (ANOVA) is used to study the influence of individual parameters like normal load, dry sliding speed and sliding distance on the coefficient of friction and wear of nickel based super alloy material. Originality/value This is the first time to study effect of contact temperature on the coefficient of friction and wear behavior of nickel-based super alloy used for gas and steam turbine blades. Separate regression equations have been developed to determine the coefficient of friction and wear for the entire range of speed of gas turbine blades made of nickel based super alloy. The regression equations are also validated against experimental results.

scholarly journals Antifriction and Antiwear Effect of Lamellar ZrS2 Nanobelts as Lubricant Additives

Nanomaterials ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 329 ◽  
Author(s):  
Wei Tang ◽  
Chuang Yu ◽  
Shaogang Zhang ◽  
Songyong Liu ◽  
Xingcai Wu ◽  
...  
Keyword(s):  
Coefficient Of Friction ◽  
Carrying Capacity ◽  
Friction And Wear ◽  
Normal Load ◽  
Lubricant Additives ◽  
Load Carrying Capacity ◽  
Load Carrying ◽  
The Coefficient Of Friction ◽  
Wear Tests ◽  
Friction And Wear Tests

In this study, the tribological behavior of lamellar ZrS2 nanobelts as lubricant additives was investigated under different concentrations, normal load, velocity, and temperature. The friction and wear tests were performed using a tribometer and with a reciprocating motion. The results indicate that the lamellar ZrS2 nanobelt additives can effectively reduce the coefficient of friction and running-in time during the running-in period. With the addition of ZrS2, the wear volumes decrease significantly. The wear is mostly influenced by the tribological performance throughout the running-in period. The lower the running-in time and coefficient of friction are during the running-in period, the less amount of wear is shown. ZrS2 can significantly increase the load-carrying capacity of oil. The 1.0 wt% concentration of ZrS2 yields the best antifriction effect, antiwear performance, and load-carrying capacity. The ZrS2 additives can increase the working temperature of the oil. The friction-reducing and antiwear mechanisms of lamellar ZrS2 were discussed.

Study of behaviour of aluminium oxide nanoparticles suspended in SAE20W40 oil under extreme pressure lubrication

2015 ◽  
Vol 67 (4) ◽  
pp. 328-335 ◽  
Author(s):  
Avinash A. Thakre ◽  
Animesh Thakur
Keyword(s):  
Coefficient Of Friction ◽  
Normal Load ◽  
Friction Reduction ◽  
Lubricating Oil ◽  
Extreme Pressure ◽  
Sliding Speed ◽  
Content Type ◽  
Base Oil ◽  
Pin On Disc ◽  
The Coefficient Of Friction

Purpose – The purpose of this paper is to include investigation on extreme pressure lubrication behaviour of Al2O3 nanoparticles suspended in SAE20W40 lubricating oil. Effects of nanoparticles size (40-80 nm) and its concentration (0-1 per cent) on the coefficient of friction is studied using pin-on-disc tribotester. Design/methodology/approach – Taguchi technique is used to optimize the process parameters for lower coefficient of friction. L18 orthogonal array involving six levels for one factor and three levels for remaining three factors is selected for the experimentation. The parameters selected for the study are sliding speed, normal load, nanoparticles size and its concentration in base oil. Findings – It has been found that the presence of nanoparticles in proper concentration shows excellent tribological improvement in frictional characteristics compared to the base oil. The optimal combination of the parameters for minimum coefficient of friction is found to be 0.8 per cent concentration of 60 nm sized Al2O3 nanoparticles, 1,200 rpm sliding speed and 160 N of normal load. The mechanism of friction reduction in presence of nanoparticles is investigated using scanning electron microscopy. Originality/value – This is the original work.

Coefficient of friction of dry sliding Al 6061-T6 alloy under different loading conditions

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Srinivasula Reddy I. ◽  
Vadivuchezhian Kaliveeran
Keyword(s):  
Coefficient Of Friction ◽  
Normal Load ◽  
Hertzian Contact ◽  
Dry Sliding ◽  
Automobile Engineering ◽  
Sliding Speed ◽  
Content Type ◽  
Al 6061 ◽  
Contact Configuration ◽  
The Coefficient Of Friction

Purpose This paper aims to focus on the effect of normal load, sliding speed and temperature on the coefficient of friction of Al 6061-T6 alloy under dry sliding conditions. Design/methodology/approach Dry sliding experiments were conducted using rotary type pin on disk tribometer. Pins with 3 mm radius of contact and circular disks of 165 mm diameter were fabricated to simulate Hertzian contact configuration. Experiments were conducted by applying three different normal loads (1, 1.5 and 2 kg) and three different sliding speeds (1.25, 2 and 3 m/s) at different temperatures [room temperature (31 ± 1 °C), 60 °C, 100 °C and 150 °C]. Findings Coefficient of friction at end of the first cycle of sliding, stabilized stage, unsteady state and steady state are reported elaborately in this study. Adhesive and abrasive wear mechanisms were observed in the dry sliding of Al 6061- T6 alloy contacts from the microscopic analysis of worn contact surfaces. The coefficient of friction was more influenced by the increase in normal load than the increase in sliding speed and temperature. Practical implications The results obtained from this study are significant for the design of aluminium-to-aluminium contacts in aerospace engineering and automobile engineering. Originality/value This study reveals the coefficient of friction of aluminium-to-aluminium (Al 6061-T6 alloy) contacts under cylinder on flat contact configuration.

A Comparative Study of Microstructure, Coefficient of Friction and Wear Rate of Alloy Ni-Cr-B-Si-C-W

2021 ◽  
Vol 406 ◽  
pp. 229-239
Author(s):  
Mohamed Nabil Bachirbey ◽  
Mohammed Seyf Eddine Bougoffa ◽  
Chahrazed Benouali ◽  
Tahar Sayah
Keyword(s):  
Wear Rate ◽  
Coefficient Of Friction ◽  
Friction And Wear ◽  
Sliding Friction ◽  
Wear Behavior ◽  
Normal Load ◽  
New Approach ◽  
The Coefficient Of Friction ◽  
Loss Of Mass ◽  
Tribological Parameters

The present work aims at the study of the dry disc pion contact and the complex phenomenon of the wear as well as the sliding friction of our sample elaborated by a hot isotactic compression and the pion. This study consists in determining the coefficient of friction and the influence of the tribological parameters on this phenomenon as well as determining the loss of mass and the wear rate of study sample. In order to enhance the assurance of the validity of the results of tribological study of Ni-Cr-B-Si-C-W alloy in laboratories and compare that to the tribological conditions in reality and industries. This work presents the results of the new approach to compares the wear behavior of the sample between a theoretical study (tribometer)and another in service (a test bench) that reproduces approximately the same conditions as the tribometer (normal load, sliding speed and distance traveled) by measuring the loss of mass and wear rate.

Sign in / Sign up

Export Citation Format

Share Document