scholarly journals Design, simulate and construct a fingerprints attendance system with data logging

2021 ◽  
Vol 40 (4) ◽  
pp. 703-712
Author(s):  
A. Basila ◽  
A. Danladi

Because of its uniqueness and accuracy over time, fingerprint has been used for identification for many years, more recently being automated due to advancement in computing capabilities, fingerprint identification is one of the most well-known and popular biometric identification systems. The methodology comprised of a power supply, input voltage to the LM7805 should be at least 2v greater than the required 5v output according to its rating from the datasheet; hence it requires an input voltage of atleast 7v. Hence, 9v battery was adopted with current rating of 1A for convenience. The LM7805 voltage regulator IC was used since we needed 5v. The Fingerprints Attendance System with Data-login was designed, simulated and implemented/constructed, and was able to address the attendance issues in Adamawa State University, Mubi by the following means: no time waste as the attendance is taken during lecture without intervention of the lecturer, managing the attendance is automated, no chance for buddy signing, real time attendance capture, evaluate level of attendance for students automatically. Also, this system can easily be applied for examination attendance and monitoring.

2019 ◽  
Vol 14 (1) ◽  
Author(s):  
Yue Shi ◽  
Anqi Wang ◽  
Jianwen Cao ◽  
Zekun Zhou

AbstractA high-stability voltage regulator (VR) is proposed in this paper, which integrates transient enhancement and overcurrent protection (OCP). Taken into consideration the performance and area advantages of low-voltage devices, most control parts of proposed VR are supplied by the regulated output voltage, which forms self-power technique (SPT) with power supply rejection (PSR) boosting. Besides, the stability and transient response are enhanced by dynamic load technique (DLT). An embedded overcurrent feedback loop is also adopted to protect the presented VR from damage under overload situations. The proposed VR is implemented in a standard 350 nm BCD technology, whose results indicate the VR can steadily work with 5.5–30 V input voltage, 0–30 mA load range, and 0.1–3.3 μF output capacitor. A 2.98 μV/V line regulation and a 0.233 mV/mA load regulation are achieved with a 40 mA current limiting. The PSR is better than − 64 dB up to 10 MHz with a 0.1 μF output capacitor.


Author(s):  
Jenni Myllykoski ◽  
Anniina Rantakari

This chapter focuses on temporality in managerial strategy making. It adopts an ‘in-time’ view to examine strategy making as the fluidity of the present experience and draws on a longitudinal, real-time study in a small Finnish software company. It shows five manifestations of ‘in-time’ processuality in strategy making, and identifies a temporality paradox that arises from the engagement of managers with two contradictory times: constructed linear ‘over time’ and experienced, becoming ‘in time’. These findings lead to the re-evaluation of the nature of intention in strategy making, and the authors elaborate the constitutive relation between time as ‘the passage of nature’ and human agency. Consequently, they argue that temporality should not be treated merely as an objective background or a subjective managerial orientation, but as a fundamental characteristic of processuality that defines the dynamics of strategy making.


Author(s):  
Florian Agbuya ◽  
Gerard Francesco Apolinario ◽  
Dianne Marie Ramos ◽  
JD Mark Villanueva ◽  
Princess Zafe ◽  
...  

Author(s):  
Yu-Hsiang Wu ◽  
Jingjing Xu ◽  
Elizabeth Stangl ◽  
Shareka Pentony ◽  
Dhruv Vyas ◽  
...  

Abstract Background Ecological momentary assessment (EMA) often requires respondents to complete surveys in the moment to report real-time experiences. Because EMA may seem disruptive or intrusive, respondents may not complete surveys as directed in certain circumstances. Purpose This article aims to determine the effect of environmental characteristics on the likelihood of instances where respondents do not complete EMA surveys (referred to as survey incompletion), and to estimate the impact of survey incompletion on EMA self-report data. Research Design An observational study. Study Sample Ten adults hearing aid (HA) users. Data Collection and Analysis Experienced, bilateral HA users were recruited and fit with study HAs. The study HAs were equipped with real-time data loggers, an algorithm that logged the data generated by HAs (e.g., overall sound level, environment classification, and feature status including microphone mode and amount of gain reduction). The study HAs were also connected via Bluetooth to a smartphone app, which collected the real-time data logging data as well as presented the participants with EMA surveys about their listening environments and experiences. The participants were sent out to wear the HAs and complete surveys for 1 week. Real-time data logging was triggered when participants completed surveys and when participants ignored or snoozed surveys. Data logging data were used to estimate the effect of environmental characteristics on the likelihood of survey incompletion, and to predict participants' responses to survey questions in the instances of survey incompletion. Results Across the 10 participants, 715 surveys were completed and survey incompletion occurred 228 times. Mixed effects logistic regression models indicated that survey incompletion was more likely to happen in the environments that were less quiet and contained more speech, noise, and machine sounds, and in the environments wherein directional microphones and noise reduction algorithms were enabled. The results of survey response prediction further indicated that the participants could have reported more challenging environments and more listening difficulty in the instances of survey incompletion. However, the difference in the distribution of survey responses between the observed responses and the combined observed and predicted responses was small. Conclusion The present study indicates that EMA survey incompletion occurs systematically. Although survey incompletion could bias EMA self-report data, the impact is likely to be small.


Author(s):  
Amira Haddouk ◽  
Khaoula Khlifi ◽  
Vitor Monteiro ◽  
Joao L. Afonso ◽  
Hfaiedh Mechergui

2021 ◽  
pp. 216770262096629
Author(s):  
Grace M. Brennan ◽  
Arielle Baskin-Sommers

Physically aggressive individuals are more likely to decide that others are threatening. Yet no research has examined how physically aggressive individuals’ social decisions unfold in real time. Seventy-five incarcerated men completed a task in which they identified the emotions in faces displaying anger (i.e., threat) and happiness (i.e., nonthreat) at low, moderate, or high ambiguity. Participants then rated their confidence in their decisions either immediately or after a delay, and changes in confidence provided an index of postdecisional processing. Physical aggression was associated with stronger differentiation of threatening and nonthreatening faces under moderate ambiguity. Moreover, physical aggression was associated with steeper decreases in confidence over time following decisions that threatening faces were nonthreatening, indicating more extensive postdecisional processing. This pattern of postdecisional processing mediated the association between physical aggression and angry rumination. Findings suggest a role for postdecisional processing in the maintenance of threat-based social decisions in physical aggression.


2021 ◽  
Vol 11 (7) ◽  
pp. 3122
Author(s):  
Srujana Neelam ◽  
Audrey Lee ◽  
Michael A. Lane ◽  
Ceasar Udave ◽  
Howard G. Levine ◽  
...  

Since opportunities for spaceflight experiments are scarce, ground-based microgravity simulation devices (MSDs) offer accessible and economical alternatives for gravitational biology studies. Among the MSDs, the random positioning machine (RPM) provides simulated microgravity conditions on the ground by randomizing rotating biological samples in two axes to distribute the Earth’s gravity vector in all directions over time. Real-time microscopy and image acquisition during microgravity simulation are of particular interest to enable the study of how basic cell functions, such as division, migration, and proliferation, progress under altered gravity conditions. However, these capabilities have been difficult to implement due to the constantly moving frames of the RPM as well as mechanical noise. Therefore, we developed an image acquisition module that can be mounted on an RPM to capture live images over time while the specimen is in the simulated microgravity (SMG) environment. This module integrates a digital microscope with a magnification range of 20× to 700×, a high-speed data transmission adaptor for the wireless streaming of time-lapse images, and a backlight illuminator to view the sample under brightfield and darkfield modes. With this module, we successfully demonstrated the real-time imaging of human cells cultured on an RPM in brightfield, lasting up to 80 h, and also visualized them in green fluorescent channel. This module was successful in monitoring cell morphology and in quantifying the rate of cell division, cell migration, and wound healing in SMG. It can be easily modified to study the response of other biological specimens to SMG.


Sign in / Sign up

Export Citation Format

Share Document